Connect iPad directly to MBP using a computer to computer network

Hi
I'm awful at networking, so please excuse my ignorance. I am going away from home soon and there is no wireless network available, no router etc. I want to be able to connect my ipad to my MBP wirelessly so that I can use home sharing etc. How do I do this without a router? Can it be done at all?
Many thanks in advance
Rob

Done it!

Similar Messages

I've lost my iPad. I tried using my friend's computer to locate it but maybe the one who took it turned it off. What can I do?

I've lost my iPad. I tried using my friend's computer to locate it but maybe the one who took it turned it off. What can I do?

If you had "Find My iPad" enabled in Settings > iCloud then you may be able to locate it. If not, you cannot locate it. If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPad" has not been disabled on it. Note: Disabling "Find My iPad" is much more difficult in iOS 7.
If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
See also here for additional information: http://support.apple.com/kb/HT5668

HT1454 Is it possible to connect iPad directly to my smart tv without an Apple TV box?

Can I connect my iPad directly to my smart tv without using an Apple TV box?

Yes, using an appropriate video cable.
Such as: http://store.apple.com/uk/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a
Make sure you get the right one for your iPad and whatever connection you have on your TV.

Connecting iPads to an Enterprise Wireless 802.1x (EAP-TLS) Network Using Windows Server 2003 IAS

Hi there,
I am asked to deploy iPads on an 802.1x EAP-TLS WiFi network. The customer has a Windows Server 2003 IAS server providing RADIUS. There also is a Windows based CA infrastructure in place. This solution is in production and is already being used by other wireless devices. Could someone please highlight the configuration steps for the iPad deployment? The customer whishes to automate the initial deployment and the renewal of the certificates. I have a basic understanding of 802.1x, RADIUS, Certificates etc. in a Windows infrastructure but I am new to enterprise deployment of iPads. There is no MDM tool in place by the way...
I did find a Microsoft article which I think describes what needs to be done: http://blogs.technet.com/b/pki/archive/2012/02/27/ndes-and-ipads.aspx. This article basically states the following steps:
1. Create a placeholder computer account in Active Directory Domain Services (AD DS)
2. Configure a Service Principal Name (SPN) for the new computer object.
3. Enroll a computer certificate passing the FQDN of the placeholder computer object as a Subject Name, using Web Enrollment Pages or Certificates MMC snap-in directly from the computer (Skip step 4 if you are using the Certificates MMC snap-in)
4. Export the certificate created for the non-domain joined machine and install it.
5. Associate the newly created certificate to the placeholder AD DS domain computer account manually created through Name Mappings
The article then elaborates on specific steps needed for the iPad because it treats all certificates as user certificates. Can someone confirm this behavior??
Regards,
Jeffrey

Use VPP. Select an MDM. Read the google doc below.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
business site is:
http://www.apple.com/lae/ipad/business/resources/
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0

A Dr. I support in my daily work is unable to enter an Adobe Connect meeting. She is using a Dell 760 computer.

When she types her name and presses enter, she is directed to a webpage stating she needs Adobe Flash Player 11.2 or greater. Adobe Flash Player 17 is installed on the computer. I have already installed Adobe Connect 9 Plugin for windows. Windows 7 in her operating system. What can I do to resolve her problem?

Have they tried using a different web browser?

MBP freezes when connecting iPad 2 to MBP running Mavericks

Hi, following an upgrade to OS X Mavericks (this never used to be a problem), every time I connect my iPad 2 to my MBP the keyboard and trackpad becomes unresponsive and I would have to do a hard reboot. Any reason why this is and are there any fixes? Thanks!!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

My sony video camera has HDMI out - can I download direct into MBP using dhmi

Is it possible to download direct from video camera with HDMI out to Macbook Pro 15" HDMI in.

HDMI out is only suitable to connect to a display.
Current Macs do not have raw-Video inputs. Use USB or FireWire.

HT1766 I purchased two apps for my iPhone and every time I try to install them on my phone I keep getting a message saying that the file is over 50MB and I need to connect to wi-fi or use iTunes on my computer to download. How do I do that?

I just got an iPhone 4 and have been downloading apps from the iTunes store when I encountered difficulty with two specific apps. Each time I try to download dictionary and star walk I get a message saying they are over 50MB and I need to be connected to iTunes to download, which I've tried to no avail. I also thought that when I sign into iTunes on my PC that it would automatically show that my iPhone device is connected (just like it does with my iPod) but it doesn't show the phone icon. I am not sure iTunes is recognizing my phone. Any help you can offer is greatly appreciated.

Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan.

Do you have any way to connect iPad 1 on TV using 30-pin digital adapter?

....

You will need something along the lines of these adapters and cables. will depend on what sorts of input ports you have onthe TV you wish to use.
http://store.apple.com/us/product/MC552ZM/B/apple-vga-adapter?fnode=3a
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
An Apple TV also allows mirroring of most content via WiFi: http://store.apple.com/us/browse/home/shop_ipod/ipod_accessories/apple_tv

I have an iPad 3 if I use the USB cable can I print to any printer no connected to a computer

I have an iPad 3 if I use the USB cable to any printed not connected to a computer will I be able to print

No. iPads print only wirelessly. You need an Airprint capable printer,
or a network printer reachable wirelessly or a printer that can make
its own ad hoc wireless network. There is no USB connection on an
iPad.
What type (manufacturer & model) are you trying to print to?

I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

I have a new Ipad and was trying to sync from Itune what is on my Iphone. It keeps saying "Ipad can't be used Apple Moble device service isn't started". ???? help It also said that on my Iphone just now when I was trying to connect to Itunes.

I have a new Ipad and was trying to sync from Itune what is on my Iphone. It keeps saying "Ipad can't be used Apple Moble device service isn't started". ???? help I then tried to connect my phone to Itunes and it is saying the same thing??? Help what is going on?

Right click 'computer' in your PC/laptop (whichever). Click 'Manage', then 'Services and Applications', then 'Services', you should see 'Apple Mobile Device' running or stopped. If you couldn't find 'Apple Mobile Device', it means you haven't download iTunes into your PC/laptop (whichever).
Cheers

Connected ipad to win 7 computer to upgrade it thru itunes. Says ipad has latest version but did not install correctly. Appear to have lost everything

Connected ipad to win7 computer to upgrade os as I needed to download an app. Says it has latest version but it did not install correctly. Ipad says hello,asks for language and location,wi-fi then options are set up as new ipad,restore from icloud or itunes backup. I think I have managed to backup over my good backup and lost everything. Ipad will not boot HELP

Hello RodneySmart,
Thanks for using Apple Support Communities.
From what I understand about your issues is that your iPad will currently not turn on. In attempt to resolve this issue please follow the steps in order below:
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
Alex H.

Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

Air MD792E/A, iPAD WIFI CELL 32G Space Grey
Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in? Tried to sync with itunes but iTunes can't sync without a password. I cannot see summary on the side bar. How do I restore so I can restart my iPAD Air since it has relatively no history. I have not had the chance to use it yet. Finished set up to as far as the start menu.
<Personal Information Edited by Host>

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Whlile connecting iPad to computer, battery is not getting charged

What settings to be made so that when I will connect my iPad to computer, my Pad's battery should get recharge. While connecting iPhone, it is getting recharged but not the Pad.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Connect iPad directly to MBP using a computer to computer network

Similar Messages

Maybe you are looking for