Connect iphone to internet through macbook

How do I connect my iphone to the internet through my macbook which is connecting to the internet through broadband

Assuming your MacBook is connected via ethernet and you want to create a wifi signal for the iPhone (and that you don't have a wifi router which would be the more usual way with both devices just connecting to the router): http://support.apple.com/kb/PH10740

Similar Messages

  • I recently updated my iPod touch to sync through iCloud - now can't connect to the internet through wifi, my macbook air is working as we speak

    I recently updated my iPod touch to sync through iCloud - now can't connect to the internet through wifi, my macbook air is working as we speak. ive tried 'forgetting this network" in settings; tried turning off and on again; and pulling my hair out! The last was equally useless and a little painful!

    Try:
    - Resetting the iPOd. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Pwer off and then back on yur router
    - Reset network settings: Settings>General>Reset>Reet Network Settings
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G?  My plan with was to go for wi-fi and connect to the internet through my iPhone 4.  Am I missing out on anything by not getting 3G?

    What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G?  My plan with was to go for wi-fi and connect to the internet through my iPhone 4.  Am I missing out on anything by not getting 3G?

    James9901 wrote:
    I tried the tethering and hated it. The connection breaks every time I get > 25 feet from it and it's a pain to reestablish the connection. I suppose if I had to choose between breaking connections every now and then or paying another $100 + $25/month I'd do the tethering.
    Or just carrying the phone in your pocket? Just saying.....

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod touch says that i am connected to the internet through settings but when i get on email or facebook it says no internet connection?

    My ipod touch says that I am connected to the internet through the setting tab but when i try to get on the internet it says no connection. I tried new downloads and updats and connectioning to other wifi in variouse places and still no luck.

    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset<Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • We are on holiday in Mexico. Our iPad has no problem connecting to the Internet through a subscription WiFi network. But, both of our laptops can not with the same password. What can we try?

    We are on holiday in Mexico. Our iPad2 has no problem connecting to the Internet through our hotel's subscription WiFi network. But, both of our macbookpros can not with the same password. What can we try?
    We can join the network, but can not access the Internet. The password is correct. We have tried network assistant and diagnostics, restarting the laptops, re-joining the network. Our iPhone 4s also works all the time.
    Same location. Signal strength is good.

    Since I couldn't figure out a way to edit our original post, here's another potential clue.
    Our laptops, when in System Preferences>Network, say "WiFi has the self-assigned IP address of XXXXXXXXX and will not be able to connect to the Internet".
    Strangely, my six year old MBP running OS 10.6.8 accessed the Internet straight away, just by opening Safari to my home page. My wife's six month old MBP running OS 10.7.2 could not.

  • How on earth could I be connecting to the Internet through my airport express when it is not connected to anything?

    I'm not entirely displeased with the situation but I cannot see how I could be connecting to the Internet through my airport express when the Airport is not connected to anything.
    Weird huh?
    I have a separate non- Airport wireless network connected to the Internet.  I had previously set-up the Airport to link with this network but disconnected it (by resetting it) as music streaming was unlistenable due to frequent drop out.  I now just have the Airport Express as a standalone wireless network only connecting to the stereo to stream music from devices.
    My devices are only connected to the Airport network with cellular data off. Yet I can still connect to the Internet AND listen to streaming music (without drop-out no less).
    I don't want to fix it but I would like to know how the frag it could happen so i don't screw it up accidentally.

    I would say you still have something of the previous setup.
    To be sure you don't mess up, save the configuration.. go to the top menu area of the airport utility and export configuration.. which will land on your computer.
    Now you can recover at anytime to the current setup.
    How it works.. that is magical ..
    Open the airport utility.. edit.. and take a screenshot and post it of the following pages..
    Internet wireless network
    THen we can tell you how it is working.

  • URGENT: How to connect iPhone to internet over ad-hoc wi-fi network from MacBook?

    I need to access the internet over wi-fi on my iPhone, but there is no wi-fi network I can use, so I am creating one with my MacBook. I choose "Create Network…" from the Airport menu on my Macbook, and I am able to connect my iPhone to the ad-hoc network I have  made, but I can't access the internet with it, for some reason.
    I think this might have something to do with one of the following two things, but I'm not sure:
    1.) In system prefs > network on my Macbook, it says:
    "Wi-Fi has the self-assigned IP address 169.254.83.143 and will not be able to connect to the Internet."
    2.) Also in system prefs > network, under 802.1X, it says: "Authentication server is not responding".
    Any help will be deeply appreciated.

    To add more, when looking at the network (you have to be on it or near it) in your list, click the blue arrow next to it to get the settings for that network. On that screen you can tell it to forget.

  • My macbook pro doesn't connect to iCloud. It only connects to the internet through Google.

    How do I reconnect through the internet through Safari and Mail? It just stopped working today.

    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the  Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
    2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • IMacs won't connect to the internet through a Double Router Network.

    Hey guys,
    I have 4 computers in the house, 1 is an XP system, 2 are iMacs running latest version of Leopard, the last is my Macbook Pro running latest Snow Leopard. The reason for the two router solution is as follows: The connection where the modem and router were previously was unable to broadcast a signal to the other side of the house (concrete). So I placed a wired router on the end where the modem is, and through cat cables placed in the walls, placed a wireless router on the other side of the house.
    I have already set up the wireless router to become a wireless access point by turning the operating mode to router instead of gateway, and changed the internal ip to 192.168.2.x. All in all my macbook connects to the internet just fine through the router now turned access point and picks up the IP of 192.168.1.x (from the wired router directly connected to the modem), but the iMacs are picking up 192.168.2.x ips which have no connection to the internet.
    I have tried to renew the DHCP lease (which should pull the 192.168.1.x since the wireless router has DHCP turned off) but it still wants to connect to 192.168.2.x. Any ideas or solutions to fix this?

    hi i have read your problem but i can be wrong... because suppose to be your system have working before. i think can exist conflicts between modem ip address and router ip address. first disconnect your modem from your router put in your internet explorer 192.168.1.1 and if your router has password live user name area in blank. and put in password area admin and push return. when appear the setup menu ( must to be in basic setup menu by default) search the text Local IP Address 192.168.1.1 and let change for 192.168.2.1 and do click in save settings button turn off your modem your router and connect everything and turn on them. check if you get access internet service.

  • Airport Express 2nd gen will connect to the internet through LAN but not over wifi?

    Interesting issue, I can stream Apple TV connected to the LAN port, send Airplay music to my receiver from my iphone, but cannot access the internet over wifi. So it's not Comcast, it has to be the Airport Express, but not ALL of the Airport Express, just the part that sends the internet signal. Is that even possible? I've restarted reset (hard and soft), re-setup, and unplugged everything 100 times, but to no avail. Any ideas?
    Thanks!

    Ok, thank you.
    I know you already tried a number of resets, but please give the following a try to verify that you can get basic Internet access via a wireless connection to the Express from any of your wireless network clients.
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Trying to back up iphone to iTunes through MacBook Pro but cant figure it out. not much time on computer. thanks

    dont undrstand how to connect iphone to macbook pro to reload my iphone back up. not much time on computer. thanks for the help

    http://support.apple.com/kb/HT1766

  • Need help in using my GPRS connection to surf internet on macbook

    Hi,
    I have a Nokia 9300 communicator, with a GPRS conenction. I want to use it to connect to the internet on my macbook. Since I am in India, my service provider, not having sufficient knowledge of the mac, cannot help me with configuring it.
    can anyone hwlp me here?
    i want to connect using bluetooth. Also, although I can connect the phone to the macbook via bluetooth and can trabsfer files to & fro, I cannot syncronise my phone book.
    How do I go about doing that??
    Thanks in advance.

    Hi Brian, Thanks for that. I went to meet my service provider (Hutch) yesterday. What he told me is very close to yours. Here it is
    First, when we have to make the new connection, there are 2 options - dial up or GPRS line. We tried GPRS line and set up as follows:
    Username: Blank
    Password:Blank
    Number to dial 99**# or *99#
    Here, the guy wants to know where we can enter the APN number - & I have no clue.
    Second, using these settings, I got connected, the MB says it was authenticating user and my call also showed the "G" sign, but it went away after a second, giving me an error message - Could not negotiate connection with PPP server.
    Just for curiousity sake, this guy tried his cell- a Nokia 6230. & it worked just fine. There was this problem, though, that every few seconds, the connectiion went off, giving the message that the modem had unexpectedly hung -up (& the poor guy's cell would switch off & on again on its own). But this is still distant for me.
    I need your help in getting the modem script that you are talking about. I can only see 3 nokia modems- & they are all ir, none of them are for GPRS.
    My problem is that there is no store or anything like that in India. I just bought the MB when in London recently, as it looked nice. Not very sure what to do now.
    Awaiting more help
    Rajat

  • My IMAC will not connect to the internet. Macbook pro and a pc will

    My IMAC will no longer connect to the internet.  It is set up wirelessly.
    My Macbook Pro and a PC connect with no problem.
    Both the Macbook and the IMAC are configs are the same except for the IP and MAC addresses.
    Any suggestions?

    Troubleshooting Wi-Fi issues

Maybe you are looking for

  • Help needed in adding effects of certain HTML tags in Flex spark Richtext

    I want to apply the effects of the following HTML tags/ attributes, in my HTML text rendered in Flex Spark Richtext Component. Superscript - <sup> Subscript - <sub> Blockquotes - <blockquotes> Ordered Lists - <ol><li> Unordered List - <ul><li> Horizo

  • Installing Exchange 2013 on Windows Server 2012 R2

    Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2 But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported: - Install

  • Creation of Vendor

    Hi All, I enhance the standard screen XK01 using badi 'VENDOR_ADD_DATA_CS'. In that i put a break-point in  method  'GET_DATA'. But  is not triggering while creating Vendor.Please tell in which scenario it will trigger.

  • Errors during install of Solution Manager 7.0 w/MaxDB (central)

    Hi I am trying to install Solution Manager 7.0 w/MaxDB on a linux box. I have reached phase 47/50 and am running into errors that say: ERROR 2011-07-14 16:29:54.609 CJS-30151  Java process server0 of instance OSM/DVEBMGS00 [ABAP: ACTIVE, Java: (dispa

  • Collection in source system ended

    Hi Experts, Need your help on the below issue. Due to error at R/3 the status of my load for one of the infosource is YELLOW with status: Collection in source system ended. The Request (REQU_4CXV37IJY08OX4UVF4YCPREAR) in R/3 under SM37  is Completed