Connect ipod to HK soundsticks I with usb interface

Does anyone know how to connect an ipod 30 Gb to HK soundsticks I with usb interface?

No way without a computer in the middle. You will need the Soundsticks II with minijack interface.

Similar Messages

  • I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.  When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

    I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
    When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
    I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
    I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
    nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod touch will not work with USB 2.0 PCI Card?

    I have a dual processor PowerMac G4 that has USB 2.0 via a PCI card. When I plug in the iPod nothing at all happens. I haven't read anything about PCI cards not being compatible with the touch. Is anyone else having this problem?

    Just thought I'd add my 2 cents...I've got the same problem...I've had a Keyspan USB 2.0 5 port card in my Dual MDD G4 for years and it's worked fine. Well, until a few days ago when I tried updating some stuff on our iPods. It would initially start working then lose connection. Now nothing at all with 5 iPods. It won't even show up on the desktop under Disk Mode. I did the same and it works fine under the old stock USB 1.0 but slooooooowwww. Is this yet another problem with Leopard? I've searched the Keyspan site and they don't have any updated drivers. Guess I'll look for a Belkin as well...ugh!!! Leopard is horrible! First no printer drivers, then no iSub support, now this!

  • I can't connect MacbookPro to Infocus projector IN32IN34 (with USB). Do you have any suggestions?

    I can't connect MacbookPro to Infocus projector IN32 IN34 (with USB).
    Does anyone have any suggestions?
    Thank you!

    Which problems do you have on that website?
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • IPhone 5 not working properly with  USB interface in Honda Accord.

    The iPhone 5 seems not to work properly with the USB interface in my 2012 Honda Accord. It says I have 500  songs when I only have 430, it skips over songs and freezes during play.

    I actually have a different problem. I am unable to play Pandora through my USB connection in my 2012 Honda Accord SE with my iPhone 5. I can't get map directions through my speakers or any sounds at all. Any idea if a fix will be available?

  • Java Card with USB interface

    Hi,
    I'm trying to use a Java Card for a project I'm doing at the university. But one of our requirements is to use a one with a USB interface +(ie: without the need for a separate smart card reader).+
    Have anyone come across such a device that is with a USB interface. If so please provide me with links.
    Thanks in advance.
    Regards,
    NiMaL

    ID-1 Format:
    NXP (Philips) JCOP 41 V2.2.1/72K USB
    http://tinyurl.com/6oz9qq
    OMNIKEY CardMan 1109 USB Connector
    http://tinyurl.com/5zvg34
    ID-0 Format:
    NXP JCOP 41 V2.2.1/72K USB SIM format
    http://tinyurl.com/5abxxj
    Gemalto Reflex 531 USB SIM Token Connector
    http://tinyurl.com/5j9e5p
    SIM card retainer/Surface mount type
    http://tinyurl.com/63buqy

  • Unable to remote control Tektronix TBS1062 with USB Interface

    Hi,
    I have recently downloaded IVI Driver for Tektronix TBS1062 from national instruments.  I am using USB communication.I have configured the instrument in NI MAX and can identify the instrument successfully. However I am unable to use any of the other functions using IVI  driver. The IVI Step in NI TestStand always passes without any errors and NI I/O Trace shows VI_SUCCESS but I cannot see any chanes to settings in the horizontal scale and the veritical scale as configured by the IVI step. The horizontal and vertical scales always remain the same.
    I am not really sure ,But could it be because of the USB interface?? Does the driver support USB?
    Did anyone have the same error or Could anyone please help resolve this issue.
    Many Thanks
    Solved!
    Go to Solution.

    First thing I would do is make sure the instrument is setup properly to accept commands over the USB.
    After that, try sending commands through MAX to see if the scope reacts.
    Then make sure you aren't using a simulated IVI session.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions

  • Connecting 5th gen. ipod to new LG stereo with USB port. Functionality?

    Hi,
    I recently got a new LG "micro hi-fi system" (model LFU850) with a USB port for MP3 players. The problem is when I connect the ipod via USB, I lose all the functionality of the ipod database. In other words, the stereo numerically lists about half of the songs on the ipod (293, for example)and plays them in an order I can't figure out. I can't select playlists or albums on the ipod. The ipod does charge and allow the music to be played, and it does sound GOOD. Anything I can do to restore ipod menu functionality while hooked up to the stereo? Thanks in advance! Mike
    5th gen.   Windows XP  

    I had the same problem. Because music files aren't dragged or copied into iPod hard drive (the normal process for most mp3 players) but instead downloaded through iTunes into the iPod you lose functionality because iTunes categories music files in numerous and simultaneous ways e.g playlists/genre/artist/album/ etc. Most usb enabled stereos are not fitted with the technology to unlock all that information.
    There are 3 solutions you could try.
    1. Place music files and folders directly into iPod hard drive and not through iTunes. See if that works. The only problem with this solution (if it does work) is if you still want to use your iPod as a portable music player on it's own you will have to upload your music files again through iTunes into your iPod.
    2. Buy a speaker system made for iPod but what's the point when you already have a usb enable stereo. One of the disadvantages of owning an iPod is that you never stop accessoring, the iPod on it's own is never enough because it lacks many basic utilities.
    3. Stick to your old portable mp3 player or buy one with greater capacity - (there are some with 8GB) and return or sell your iPod (This is the option I chose). I can't offer advice on buying rival mp3 players such as Creative Zen or Zune as I'm not sure of what method they use to download music files.
    Let me know how it goes!
    5th gen   Windows XP  

  • When i connect ipod classic it crashes my wireless usb card?

    I Bought an ipod classic 7gen 160 gb/
    everytime i connect to sync with my comuter,
    my wireless usb disconnects..... is it because, boht of them use usb?

    If you are using an iPod Touch 4th generation, and your computer is a PC, soft boot the device (hold the power button and home button down at the same time). Once the device has "soft booted", see if the computer recognizes the device. If yes, then you are good to go. If it asks you to restore the device, then shut the iPod down using the power button only. Wait a moment and then restart the device. You may be prompted to install a driver, if so, then install it. Once the driver is installed you will be able to sync.
    Now, for some reason I still have to plug the device into the computer, open iTunes and turn my device off and on before it will recognize it, but after that it works fine.

  • IPod Nano won't charge with USB 2.0

    I've had an iPod Nano for a few weeks now. When I first got it, I was able to charge it up over USB 2.0 with no problem. Now, the computer recognizes the iPod, and the iPod says it's charging, but it doesn't actually charge.
    I can still charge it using the firewire power adaptor from my 20gig iPod. It seems like this only started happening after I started charging via the firewire adapter. Could the firewire adapter be causing problems?

    I had to install a USB 2.0 PCI card in my G4 tower to use the nano. Shouldn't this provide enough power? I also tried hooking it up to a USB 2.0 hub with an external power supply, so that should provide enough power too, shouldn't it?

  • Ipod touch no longer charges with USB nor does it output sound through the connector

    2 problems after the latest iOS update:
    (1) my 3rd generation iPod Touch no longer changes when connected to the computer through the USB connection.  It says that the device is not supported for connection through USB.  My computer is running Snow Leopard and all software is up to date.
    (2) it also does not output sound through my clock radio nor through the built-in ipod connection in my MINI. 
    This all worked great until the latest iOS update.  Something broke in the latest update.
    anyone else seeing this issue?

    You can try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If still problem then the iOS broke full compatibility. you have to then wait for either Apple to fix the problem in an iOS update or for Honda to fix it via a firmware update/
    Have you contacted Honda?

  • Ipod doesn't charge except with usb

    My 30 gig video only charges through the usb cable via computer. It doesn't charge with older firewire adapter, and I just bought an ez-trip car charger/fm modulator and it doesn't charge either. Any ideas?

    Hmmm. I'm able to charge my iPod video or nano using a firewire cable from my Power Mac. The iPod reports that synching is not supported via Firewire but it charges.

  • How to connect ipod touch to internet through PC usb port

    Hi,
    I would like to connect my ipod touch to internet through PC. but my pc does not have wifi. I was wondering if it is possible to use USB connection to do that.
    Thank you

    I don't think so

  • Does playing my ipod on the car stereo with USB hurt the battery of the ipod?

    Just curious if when playing the ipod on the car stereo using the usb plugged into the stereo unit will cause the battery life to shorten since it is seems to be charging the ipod.  Or does the ipod have a regulator that stops the charging once the battery is full? 

    Thank you for the info.  I must have gotten a bad ipod, because I only had it for a month and the battery would drain down overnight even with the wifi and bluetooth off.  I play it on my stereo unit hooked up with the USB.  I didn't think that by doing that it would mess up the battery and cause it to drain quickly in just a month.   

  • IPod rests playlist when recharged with usb cable

    Hi,
    When I recharge my 160 Gb Classic by plugging it into my PC with the USB cable, it resets the playlist position to the beginning.  I have nearly 4000 songs, but I can only listen to around 300 of them before needing to recharge.  It doesn't matter whether iTunes is running or not.  I normally listen in shuffle mode, but I tested it with shuffle mode off, and it does not remember its place that way, either.
    Is there some way to make the iPod remember it's position in the playlist through a recharge?
    Thanks for any help you can offer.
    -- Jue

    I have to say I have the same exact problem. It may sometimes be solved by putting the ipod into Disk mode before plugging it or by changing the ipod drive letter. In my case nothing have worked though, so if anyone has other ideas please tell me.

Maybe you are looking for