Connect Ipod to stereo

When I connect my Ipod to my home stereo (with jack and RCA cable), only one speaker is working (sometimes both, but very rarely). I tried to use the dock but it is not any better: I can't figure out why I have this problem: I double checked and everything seemed to be plugged correctly. Any idea?
Fujitsu   Windows XP  
Fujitsu   Windows XP  

To Ombre57
Double check your Audio program, ; try using your headset and listen for both audio channels;
It could be a list of things that could cause your problem.
Report back on what you've tried and give results??
Texcavator You need to post your problem as new case, otherwise it'will get confusing.
Though it appears your A/V cables are bad!

Similar Messages

  • Connecting iPod to stereo with fiber optic cable???

    My kingdom for the right answer to this question.
    I'm brand new to the whole iPod scene. Just bought an 80GB video iPod and I want to use it with my stereo system instead of the old bulky 200 CD carousel.
    I see that I can connect the iPod and stereo using the AV connection kit, but isn't there a way to get digital audio sound quality with some sort of fiber optic connection?
    Will the Monster iCable Fiber Optic Kit work? It doesn't list the iPod as a use, but it sure looks like the non-Fiber optic end would fit into the iPod headphone jack.
    If anyone knows, I'd greatly appreciate the help. I'm a total newb about this and haven't had any luck with my online searches.
    Thanks in advance.

    No you cant do it but
    http://discussions.apple.com/thread.jspa?threadID=863621&tstart=180

  • What Is The Best Way To Connect Ipod To Stereo Reciever With High Quality?

    I recently purchased an 80 gig and am a newbie. I ripped all my music at around 280kbps to retain good audio quality when playing in my car and home theatre system. There are tons of accesories out there (docks, jacks, etc) which is the highest quality to connect my Yamaha receiver. I would think a connection to the bottom of my ipod would be of a higher quality rather than using the headphone jack. Any suggestions would be great. I was thinking about using the monster itv link but mostly for audio. thanks

    OK - So now that you have all completely ignored the original question - in hopes of proving your manly-hood....
    Does anyone have an answer to the original question....
    "What is the best way to connect to a high end home stereo to retain the best sound?"
    For sure any connection going through the headphone jack will be a big step back - enough so that you would easily hear a sound quality loss in doing so.
    For the few of you who would like to argue/bicker/rant on the nominal sound quality loss....keep on doing so, but for those who actually have some respectable advice we would love to hear it.
    For the record, I tend to hear just outside the normal human auditory range...
    To help myself put it to rest already... a few years back I decided to conduct my own little listening test.
    I took 6 different common ripping modalities (from lossless - to - 128kbps in both MP3 & AAC.... then transfered all of them in order to a blank. Used the same song for each - the song chosen opened with a few clean crisp bars of high freq. music, followed by an instant explosion/drop into a tight & low bassline.
    The final cutoff that was achieved before I was unable to detect an audible difference was 198 VBR AAC. Having convinced myself that there was the ever sooooooo slight difference b/t 198 & 256, I went with my current ripping status of 256.... Just incase my audible range should become finally honed with age (yeah, like that is really going to happen) !
    This test was run over a Yamaha DSP receiver, running at a constant 110w per channel (w/a max of 220w). The speaker setup was a full surround set of Klipsch Reference Series..... each speaker housing 2 x 6.5 woofer (each housing 2 x 1" Titanium tweeters) And sitting along side the 5 surrounds was/is a 150w continuous 12in. Subwoofer.
    Now I am hardly stating that I have hearing as good as some of you extremely technically profound music enthusiasts out there, but for the majority of people making comments about sound quality, and lack there of - when played over a $120/40w Audiovox radio.... I'm sorry, but I would have to side on that of......"Hogwash, that you can hear a difference!"
    So.... if possible would someone please offer some advice on a dock or cable connection that will allow us to enjoy the music we ripped at whatever
    so-called range we did!
    For those interested in seeing who could hit the further bullseye with their eyes closed, You win!!! Now can you help us?
    MBP   Mac OS X (10.4.9)  

  • Connecting ipod to stereo

    I want to know how you can connect your Ipod to a stereo, I heard that u put the FM radio in certain station and it receives the Ipod´s sign. Is it true? How can I do so, I bought an Ipod and it doesn't have anything to do this.

    an itrip is the only way i know that an fm radio station can pick it up

  • Bad sound when connecting iPod to stereo

    Can anyone help with this one?
    I am trying to connect my iPod to my stereo receiver. I have the 5th generation 30gb iPod. I hooked it up to my stereo (Sony str-de825) with a monster cable through the tape & video inputs and it it sounded low and muddy. When I turned it up the sound the receiver blew.
    I now have a new reciever and bought a dock for the iPod, and I am getting the same crappy sound through the stereo and don't want to blow it again (obviously) but would like to be able ot use my iPod in my stereo. Does anyone have any idea of what's going on?
    Thanks in advance.

    Can anyone help with this one?
    I am trying to connect my iPod to my stereo receiver.
    I have the 5th generation 30gb iPod. I hooked it up
    to my stereo (Sony str-de825) with a monster cable
    through the tape & video inputs and it it sounded
    low and muddy. When I turned it up the sound the
    receiver blew.
    I now have a new reciever and bought a dock for the
    iPod, and I am getting the same crappy sound through
    the stereo and don't want to blow it again
    (obviously) but would like to be able ot use my iPod
    in my stereo. Does anyone have any idea of what's
    going on?
    Thanks in advance.
    Why video? verify that u r connecting in the right place. try in the cd input.the cable is ok? try a new set
    .

  • Connecting ipod to stereo - music comes from ipod not speakers

    I am trying to connect my new ipod nano to a stereo system through the docking system on the stereo. The stereo is able to turn on the ipod and play music - however i hear the music playing through the ipod speakers and not the stereo. Radio or CD play fine through the speakers.
    Is the problem the docking system or is there some way in the ipod to tell it to output to an external system? earphones work fine.
    thanks for any help.

    I am having the same problem and yes, my instruction booklet states that my automobile is capable of this. When I connect, nothing happens.

  • Connecting iPOD to stereo receiver

    Sorry if this has been asked before but I couldn't find anything posted.
    I have an 80 gig Fifth Generation iPOD and was wondering if there was a way to connect it to my stereo receiver by use of RCA plugs or other wired means??? I know I could use a radio transmitter but I haven't found one that works very well.
    Many thanks in advance,
    Rich
    PS - Although this is my first time posting a question, you guys and gals have helped me countless times after reading your posts. You're the best!!!
    Dell   Windows XP  

    Hi Rich,
    Yes you can buy a simple patch cable from Radio Shack that gives you the stero headphone jack on one side and a pair of RCA jacks on the other and go to your stereo. I have found with mine, using one of those cassette adapters, I do have to crank up the iPod volume to almost max to make it sound the same volume on the car stereo as the other sound sources (radio, CD player, etc.). But other than that, it works fine.
    Like this one for $7... http://tinyurl.com/ypo8o6
    Or you can buy one of the fancier made for iPod docks that will give you this same ability with some also providing charging power to the ipod as well.
    Patrick

  • Connecting iPod to stereo and retaining control.

    When I plug the iPod touch into my stereo (Yamaha RX-V671) via USB, I lose all control.  There is a picture of an iPod Nano on the iPod Touch's screen and no way to get rid of it or do anything else.  Is there any way to fix this?  I'd like to be able to skip songs, replay, restart playback, change playlists, etc.

    Instructions?  What a concept! :-) 
    Strangely enough I could find the manuals for my Yamaha CD player and even the old cassette deck, but not the fairly new receiver.  Anyway I looked the manual up on line and I see that I have to have the TV turned on and I should see a control panel. 
    I have to leave right now, but will try this tonight.  I'm confident it will solve the problem and thanks very much for your help.

  • Ipod to stereo sound loss

    I've been searching a bit for this, but has anyone noticed some serious sound loss when connecting ipod to stereo or television and trying to play music? I've used it for TV and I didn't notice any major loss, but for music (using the standard headphone jack to white and red plug), it *****! If I turn the stereo up full ball it still lacks any punch (on a cd it would deafen me at this level). I want to buy a car stereo with an aux imput, but don't want to if it's not going to be loud. The ipod is new, so just want to know if this is normal?

    I have used all of my 4 iPods as the main source for music connected to my living room stereo for years throug a docking station. (Not through the headphone output.)For my stereo i think the "latin" equalizer setting is closest to CD sound, but that varies. The sound is very close to CD sound and I do not lack any punch. I am using the same set up in the car and no problems there either. With the latest docing station the volume on the iPod has to be on full, but it automatically goes to full volume when docking.
    By the way, I am using it with to stereos, One Denon and one Bose.
    Regards,
    Trond

  • TS1382 Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Read this Apple Support Article on Apple REMOTE
    Good luck!

  • Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Read this Apple Support Article on Apple REMOTE
    Good luck!

  • Connecting iPod Touch to bluetooth car stereo

    I recently got the Sony MX-BT2700 for my car and am loving being able to play music off my touch wirelessly. My question though is if there is a easier way to connect the touch to the stereo. Right now every time I get in the car I have to go to settings>general>bluetooth and tell it to connect to my stereo even though it's already paired. Is there someway that the iPod can be set to automatically connect to a bluetooth device when one is available? My phone (not an iphone) is able to do this without touching anything as soon as I get in the car. Thanks for the help!

    I talked to Blaupunkt support in the states and they say that they are aware of the problem! Now what kind of an answer is that? I agree with you, Blaupunkt should get on this problem and fix it. Blaupunkt catalog actually states that the Ipod interface works with any Blaupunkt head unit with CDC control since 1998+. On the interface box it says 2001+. The simple fact is they should get there "stuff" together and fix it!

  • Connecting iPod video to Blaupunkt car stereo

    Blaupunkt sells an adapter to connect iPods to their car stereo. Part number: 7607540500. It is compatible with the factory (Blaupunkt sourced) car stereo of my Fiat Panda model year 2005. The car stereo 'sees' the iPod as a Blaupunkt CD changer. It works well with the previous iPod but absolutely no-one can tell me if will work with the current video iPod that I'd like to purchase.

    I talked to Blaupunkt support in the states and they say that they are aware of the problem! Now what kind of an answer is that? I agree with you, Blaupunkt should get on this problem and fix it. Blaupunkt catalog actually states that the Ipod interface works with any Blaupunkt head unit with CDC control since 1998+. On the interface box it says 2001+. The simple fact is they should get there "stuff" together and fix it!

  • IPod Car Stereo Connection

    I just recently bought an aftermarket Kenwood, iPod compatable stereo for my car. When I plug in the iPod to the stereo (it has the modulator {direct connection, not FM}), all it plays is the first song on my list. I can't go from one album to the next. Did I set up my iPod wrong, or is it something else? Please help...thank you!!!
    Chris
    H. Packard   Windows XP Pro  

    I just spoke to Apple tech support. The techie said that they changed the pin configuration and that he did not know of any workaround for in-car charging. He also said that the 4th gen Nano (out of the box) and the 3rd gen Nano (after the latest software update) will no longer go into standby mode when connected to non-apple interfaces. He also said that they are working on it and the standby mode should work again after the next software update.

  • "Comm Error" message when connecting to car stereo

    When connecting my 80G IPod to the port in my car, the IPod screen rolls horizontally, then says "OK to disconnect", and the stereo displays the "Comm Error" message. I was able to connect to the stereo before but don't know what happened to cause this. Re-setting the IPod did not resolve the problem. Has anyone else seen this? Please help!
    5th Generation IPod   Windows XP  

    I’ve got a 30gb ipod doing the same thing. I know it’s not the car as my friends nano works fine on it. Have you have any success?

Maybe you are looking for