Connect ipod video to usb port on home cinema receiver?
I am trying to connect my ipod to my samsung home cinema receiver via the usb port. When i do it just hangs, is this not possible?
I think you might be out of luck I'm afraid. The easiest way to connect it would be with a mini-jack to stereo RCA cable.
Similar Messages
-
I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?
The iPod feature that plays through USB in my car does not work with my iPhone 6 either. I called AppleCare and they said that the car audio system will need a firmware update. Don't know if Apple is just passing the buck, but that is what I was told. Thank you for posting. I know now that I am not the only one. Thanks also for posting about the iPhone 5 running iOS 8. I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6. I guess I will just be using Bluetooth in my car, at least for now.
-
Can't synchronize my IPod with the USB-Port of my 27 Inch Cinema Display
I use a 27" Cinema Display with my Windows PC.
It is connected via USB and Display Port.
Synchronizing my IPod at the USB Port of the PC works fine.
Synchronizing my IPod at each of the three USB Ports of the Cinema Display doesn't work.
Any suggestions?
Thanks StephanSorry if there is any missing information. I'll try to put all requested information:
The car system is the one that is already installed in my car, I mean it is not something bought externally and installed in my car. The car is a ford S-Max. This car has a complete radio system that includes a USB connection for mp3 players. It works ok but not with the iPod. The IOS installed is the last that has been released, but the iPod was not working with this connection before that update. -
When I plug my ipod into my desk top my computer will not recognize the ipod in the usb port. I checked my usb port with one of my flash drives and it works fine. My ipod is in stuck in recovery mode, so has to be gone thru on itunes. Please help me
Yes, I think so... But what's odd here (to me) is that it actually matters what song the iPod was playing before being connected to that USB port. What happens if you connect the iPod when it is not playing any song? It seem like either the car audio system knows where to look for the iPod's song files, or it doesn't.
If you have a USB flash drive, try putting a few song files on it, and connecting it to that USB port. That's probably the primary reason for that USB port, so customer can attach USB flash drives with song files. If that works, and you can properly browse and play songs from the USB flash drive, you should just get a $5 8GB USB flash drive, fill it with your "car songs," and leaving it connected to the car audio system. That would be more convenient that remembering to connect and disconnect your nano all the time, and less wear-and-tear on the nano. -
I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?
I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).
-
I am conneting my Ipad to mutiple Pcs, (windows and Mac) and it is not being recognized in the device list on itunes or the computers. the ipad is fully charged, I have reset it numerous times and it gives me the apple icon and then the "connect to itunes" message.... but dose nothing after that. I had it all set up and gave it to my daughter who tried to sync it with her macbook when it did this. We are using direct connections to the computers usb ports, the cables are new, ituens is newly updated on all pc's...
any ideas what the problem is??Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X -
Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?
I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again. -
I wanted to know if there is anyway i could automatically backup my time capsule to an external drive connected to it's usb port. I tried using automator to make it copy newly added files into the external but it didn't seem to work as i had hoped and i wanted to know if anyone had any experiences in using other programs to copy the contents of one folder in the TC to another folder in a drive externally connected to the TC and also keep the contents of both folders up to date.
In short, I am basically trying to make a "raid 1" and i know that TCs dont support raid natively so thats why i asked if anyone knows of a program that could do it from the mac side.
Thanks.Carbon copy cloner might work.. expect it to be very slow.. especially if you are using wireless.
There will be various rsync shareware available.. but like your experience getting it to actually work is loads of fun.. or NOT. -
Cannot remove iPod Shuffle from USB port
I cannot physically remove iPod from the USB port on my Dell Latitude (Windows XP Pro). The device is recognized intermittently in My Computer. Powering the notebook off doesn;t solve the problem and I have done the "Five Rs".
The deveice is physically locked - can slide it partially from USB prot, but it does not release.
Any ideas?Wow!!! Take it to a Apple or Dell computer shop and hope they can remove it for you
-
Using iPod Video as USB hard disk
Can someone advise me how to use the iPod Video as USB hard disk without affecting my data in iPod player. Thanks!
You just need to enable your iPod for disk use, this will not affect whatever else you have on your iPod. This page may be of some help: Using your iPod as a storage drive
Something else to be aware of when using an iPod enabled for disk use is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod -
I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?
*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.
-
Where can I get a cable to connect my 2nd generation iPod to a USB port on a Windows PC?
My wife wants to give her old iPod to her sister but we don't have a cable that will connect to a PC's USB port. Are there adapters or something similar available that will enable our old 2nd generation iPod to communicate with a PC via a USB connection? Any other suggestions?
Why not just buy another Apple USB dock connector cable from somewhere such as Amazon? You (or your wife's sister) can get one used or brand new for pretty cheap.
http://www.amazon.com/Dock-Connector-Cable-iPhone-White/dp/B0007RV3IE
B-rock -
On connecting my ipod to the usb port in my car, the ipod menu is inaccessible
please help me to access the menu.
Hello shashankj3,
Have you tried *resetting* your iPod classic with it still connected to the USB port in you car? To do this, press and hold the *Select* (Center) and *Menu* buttons together until the Apple logo appears. Don't be afraid to try this more than once if necessary.
If no luck there, try a different cable as well as contacting the manufacturer of your car to see if there is anything they can suggest as well.
B-rock -
I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.
Sorry for the typos, I hope my message still gets across!
-
Please HELP, "iTunes has stopped working" error after connecting iPod video
People please help me out! I have a Razer Blade gaming laptop with Windows 8 64bit.
I have an iPhone 5, iPad 2 and an iPod video (80GB). I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video. I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
Procedures that I already tried and that were unsuccessful to solve the problem:
Uninstall Quicktime
Uninstall iTunes and reinstall
Reset the iPod (several times)
Delete TEMP files on computer
Restart the computer (several times)
Use a different cable and a different USB port
The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors. My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
Thanks very much!It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]
Maybe you are looking for
-
Server 2012 R2 Corrupt User Profile Disks after RDSH reboot
Hi, We have a serious problem when using User Profile Disks, we have a pretty simple setup with a single RDGW & RDCB and the 2x RDSH with a folder share for redirected folders and another for User Profile Disks. Now if any server suffers a re-boot wh
-
Remote Desktop Connection on EA6500
Very simple requirement. New EA6500 Server (Win7Pro) on LAN PC (Win8Pro) on LAN Need to use Remote Desktop Connection to connect from PC to Server. The old LinkSys WRT54G worked fine. Also tried searching the web and speaking to support for a cou
-
How do I sync my VS-2480CD to my macbook pro via midi/usb
I'm trying desperately to connect my VS-2480CD to my macbook pro and sync it with Logic. The VS2480 is my father's and is a generation older than me, so I've been hard pressed to make this operation work. I have tried installing drivers, dropping con
-
Looking for some information and help
To all, Can run run the Oracle e-business suite on the Oracle Database Express Edition 11g? Is it hard ti install for a non-db? Thank You
-
Importing multiple personalizations at once
Hello. We have a number of personalizations set up in the Supplier form that are specific to a set of about 8 responsibilities. Instead of setting up the personalizations separately for each responsibility, I am attempting to create it once, export i