Connect it to my computer
How do I connect it and have it recognized on my computer? I was looking to sync stuff to my computer such as calender or get my pictures off my phone but when I use it through bluetooh on my MAC it allows only to get the pictures off my memory card not both.
any suggestions? (when I inserted the disc that came with my phone it wont recognize it on my MAC so whatever it says on that is useless)
not sure. my pc recognized the device immidiately. it installed the software and driver onto my pc from the phone. when you connect the phone to your mac, does it do anything? there is an "application" file on the phone called "HTCSync2.0.25" this is what i ran to install the driver. the phone showed up as an external hard drive and there was a list of folders with this application at the bottom of the list and then i ran that application from it.
Similar Messages
-
Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???
Take a look at the troubleshooting steps provided by Apple in this support article:
http://support.apple.com/kb/TS1538
Hope those help.
Your iPod touch will never appear in Windows Explorer, by the way. It doesn't have the "disk mode" that the older iPods did.
Regards. -
When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??
Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped! -
My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. It lists my phone in the "devices" category on the left bar, but no longer shows any of my photos.
Does anyone have any suggestions?I've reread your question several times and am not sure I understand it.
Are you trying to basically start over, as if you just took your iPhone out of the box? If so, do:
Settings > General > Reset > Erase all content and settings -
so the ipod connects to my brothers computer fine but it wont connect to myn... it doesnt show in my computer but when i plug it in and out it makes the little connect sound and it doesnt charge on my computer either,,, my ipod nano however connects fine to my computer fine.. any solutions?? please help
Try here. Look especially at the driver and service topics. The iPod touch uses different drivers thant the Nano
iOS: Device not recognized in iTunes for Windows -
Recently I can't connect to my work computer remotely and I can't print things even when I am using my desktop which is directly connected to the printer. If I go to Internet Explorer or AOL I have no problems but since I mainly use Firefox this has become a major problem.
I encounter similar problem. My TC detects my OKI printer which is connected to the TC via USB but I can't print unless I connect my printer to the TC via Ethernet. Would anyone know how to solve it. Thanks.
-
i bought this ipod off a friend its second hand but it worked before,, my friend cleared it out so my son can put his own stuff in it ,, but when i turn it on its shows only a usb conneting to itunes and when i connect it to itunes it says soft wear not reconignised and that i should reninstall itunes which i have done 3 times and still it wont connect to itunes,,
ok try this out:
turn the ipod off, than hold the home button and than connect it with your computer, keep holding the home button, if it work fine itunes will give you a message that it found a device in recovery mode and you can try to restore it
also explained here:
http://support.apple.com/kb/ht1808 -
Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21
Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21
-
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
My phone is stuck on apple screen and i've tried to reboot it and connect it to my computer many times but it doesn't work. Can anybody help me?
This is covered in the basics section of the manual:
iPhone User Guide (For iOS 5.0 Software) -
I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?
For Windows see http://support.apple.com/kb/TS1538
For Mac OS X see http://support.apple.com/kb/TS1591 -
I have two MacBook Pros on my local wi-fi network. I usually have these connected to each other over my wi-fi network. Normally, I only connect to my old computer (MacBookPro) from the new computer (MacBookPro2), so I can access files on my old computer that are typically not on my new computer. I use the same admin username (John Doe) and password on each computer. Currently, I have Mavericks (10.9.5) on my old computer and Yosemite (10.10) on the new MacBook Pro. All
I am now getting a recurrent request to connect to old computer even when I am already connected! When this request is being made, I am asked to connect to a username (johndoe instead of John Doe). The exact alert:
Enter your name and password for the server "MacBook Pro".
connect as << button is pressed for Registered User >>
Name: johndoe
Password: _________
<< Cancel button >> << Connect button >>
When I enter correct user name (John Doe or johndoe) and password for my account on Mavericks computer, the connection fails (whether I connected to Mavericks computer or not), and I get the following:
There was a problem connecting to the server "MacBookPro". The share does not exist on the server. Please check the share name and try again.
If I change to the proper share name John Doe and use the correct password, I still am not connected and I get the same failure message and am asked to use the correct share name again. If I cancel message, the connection message goes away for a while whether I am actually connected to old computer or not. It will then come back on the workspace I am currently using on my new macbook. When I am downloading files using terminal, the connect request comes up constantly if I continue canceling the message which is really irritating. How do I get rid of this constantly recurring request to connect???It means you must be connected to your computer via Wi-Fi (or cable).
Or wait for iOS 5 -
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only
This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu -
Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod classic (80 GB, from 2006) is connected to a new computer, but only sync 241 songs, out 1825. I have restored several times. How can I fix this? my old computer is damaged and the new one run on Windows 8.
joseruiz1I ran into this same problem earlier with my new iPod classic 160 gb. Turns out it could be your files show in iTunes but they aren't connected to the location those music tracks are actually located.
Does this make any sense?
You basically have to make sure iTunes is picking your songs from the right music folder via your preferences.
Option 1: If your iTunes is completely wiped blank and your music is stored in a safe place, backed up, etc. You can do the following:
Step A. Preferences > iTunes Media Folder Location > choose folder
**** please be sure to pick a location that is new or different from where you ACTUALLY stored your music to prevent your files from deleting itself as it updates****
For example, if you stored your music on your Desktop then you wouldn't choose your music folder to be the one in Desktop. You choose the folder where you want your music to go such as C:\My Music or in Mac, you choose the music folder.
Step B. Once you choose the folder where all your music is stored and you check the box that says "Keep iTunes Media Folder organized" and "Copy Files to iTunes Media when adding to library."
Step C. This is the part that will make sense. Drag the folder on desktop that houses all your music into iTunes. Because you checked the box "Copy Files to iTunes Media when adding to library," iTunes will copy all the backup music you dragged into the folder location you designated it in "Preferences > iTunes Media Folder Location > choose folder."
---- once all that is done, your itunes will have ALL your music tracks linked to the right location on your computer and your iPod will sync with as many or all of the music you desire.
Hope this helps.
-Kayla
Maybe you are looking for
-
I was very disturbed to discover that Apple's family sharing only has the capacity for one family per ID. People nowadays are part of multiple families; whether through marriage or divorce, and those families don't necessarily want all their purchase
-
Hi all when hired an employee, while saving 0001 info type inpa40 system shows one error " Define a fiscal year variant first for company code 9369" anyone solve prob thanks and regards Seenu
-
Indesign CS6 looks unsharp, crappy and ugly on retina display
Indesgin CS6 is the only application in CS6 Design suite that doesn't support HiDpi (RETINA) displays correctly. For Acorbat X I had to purchase Acrobat XI to get a Adobe premium (and expensive) product on par with the free PDF Reader or OSX Preview
-
Why can't I access my icloud on my phone?
I'm trying to get into my icloud but every time I click on my mail button I then click on icloud put in my username and password it says that my Apple ID has already been added to my phone but I can't access icloud anywhere on my phone. Do I need to
-
How to play live streaming video which is being streamed via http or rtsp
I am building an application which needs to display live mpeg2 video; the source of the live stream is over e network, e.g,http://xxx.xxx.xxx.xx:8080. To see if QT had this capability, In QT for Open URL, I tried, rtsp://xxx.xxx.xxx.xx:8080 and http: