Connect mac pro to jetdirect 600N

connect mac pro to jetdirect 600N with the second ethernet port on the mac

This is how I've connected my Mac Pro to my JetDirect 300.
In the Network preference pane set Ethernet 2 up as shown (I didn't mess with anything under 'Advanced'.
In the Sharing preference pane select Internet Sharing and select your "Share your connect from'' port and "To computers using" port. Then select the Internet Sharing check box. I think this only needs to be done if you want to share your printer with others computers over your network but I'm not 100% sure.
Print a report from you JetDirect 600 to determine it's IP address (my JetDirect 300 does this by holding the Test button on top). Go to the Print & Scan preference pane and click on the '+' to add a printer, select IP, under Protocol select 'HP Jetdirect - Socket', and then type the IP address for your JetDirect 600. If you want give it a Name. It should automatically figure out the correct driver. Then click the Add button.

Similar Messages

Connecting Mac pro and iPad - same account different addresses

I have been reading the posts here and am a little confused about FaceTime setup.
I have an iPad with FT preinstalled. My Mac pro at home should be able to handle FT as should my MacBook pro. I understand that I can buy FT from the app store and it will work on all machines with my mac.com account.
Where the confusion comes in is people outside my account. If I am away from home with my iPad and/or laptop, will I be able to FT with someone at home? Since the home computer is registered to my Mac.com account along with my iPad, I know I cant connect to the home machine using the same account/email.
Can my wife or kids use FaceTime on my home computer with their own accounts to send or receive facetime calls from me when I am traveling? If I set up a separate user account for them on my machine will they have to buy their own copy of FT to access it (since activation seems to be tied to a .mac account) If they use their email while logged into my account, can I change the ft address on that computer back to mine when I get home?
this new app store activation process has me confused already, and the additional address need for FaceTime complicates the process even further. Any clarification on how this works and the possible limitations would be appreciated.

Just to be clear. There is no FireWire connection for the iPad.
To connect the iPad to your Mac use the cable that came with the iPad. Plug one end into the iPad and the other into your Mac.
Now, keep in mind that the iPad requires USB 2.0 on your Mac.
Also to transfer files you need iTunes 10.7 or 11.0.2 which is the latest.
iTunes 10.7 or 11.0.2 on your Mac requires OSX 10.6.8 (Snow Leopard) or later.
Make sure your Mac meets the system and iTunes requirements before proceeding.
So start iTunes on your Mac. If it is iTunes 11.0.2 use the View menu in iTunes to view Sidebar.
Then connect the iPad.
You will not see the iPad listed like a hard drive on your Mac. It will show up in the Sidebar of iTunes.
Finally, does your daughter sync her iPad to another computer? If so use that computer to add the movie to her iPad. Connecting her iPad through iTunes to your computer and syncing to add the Movie will cause all photos, music, etc. that were synced from your daughters computer to be deleted.

Connecting Mac Pro with GeForce GT120 to monitor and TV at same time

Hi - I just want to know in advance of buying the latest 8 core Mac Pro with a single NVIDIA GeForce GT120 graphics card, will this connect to both my apple cinema display 20'' and my Panasonic Viera LCD TV's 'PC Input' at the same time?
From what I can tell this graphics card has a small output port and a wider one - am I right in thinking the smaller one is a mini-display port which would connect to my TV's 'pc input' and the other is DVI which connects to the Apple cinema display? --- is the 'mini display port' something that connects directly into thr TV or is an adaptor required?
Thanks for reading!

The PC input is most likely VGA. A standard (old, but still common) connection port for most laptops (which is the primary usage). If you had a desktop, you would probably connect through DVI to HDMI.
You need a DVI to VGA adapter. Also check if you need male or female, as you might need an VGA adapter, plus VGA cord.
This adapter usually comes with all Mac Pros:
http://store.apple.com/us/product/M8754G/A?mco=NDcyMDY3OA
Then you just need to buy a long VGA cord.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812105807
http://www.newegg.com/Product/Product.aspx?Item=N82E16812105805
Again double check the if you need male/male or male/female, etc.

After connecting mac pro to tv, how to view movie on tv from laptop

After I connect my Mac Pro to my tv, how do I view a movie on tv coming from my laptop ?

Hi Anita, I have neither, but I doubt it should be so, but you may get a better answer over in one of these two, since this is the Tiger/10.4/Printing & Faxing forums...
http://discussions.apple.com/post!default.jspa?forumID=1225
http://discussions.apple.com/forum.jspa?forumID=1185
Good luck Anita.

Connecting Mac Pro to Dual G5

I apologize if this question has been asked before, but I could not find it.
I have a new Mac Pro that I want to connect to my old, dual G5 via ethernet. What I'd like to be able to do is connect the Mac Pro (with a keyboard and monitor) to the G5 (without a keyboard and monitor) and from the Mac Pro access the G5's hard drive, I/O ports and make use of its two processors to run certain programs. Is this possible? If so, I'd appreciate any advice on how to do it.
Thanks,
Frank

I think you're better off connecting the two with a firewire cable and booting the G5 in Target Disk mode.
1. Connect a Firewire cable between your MBP and your G5 Mac.
2. Your MBP is running.
3. Startup your G5 Mac in Target Disk Mode by booting and holding down the 'T' key.
Then you should have access to the G5 from the MBP.

Connecting Mac Pro to Panasonic BT-LH2550 monitor for Color

Dear All,
I am planning to have a setup to connect a Panasonic BT-LH2550 monitor with my Mac Pro to view the footage pixel-pixel for serious color grading with Color from FCP Studio.
I am wondering what kind of connection I need to have between the monitor and the Mac. In fact, do you I any extras card or connector. Someone told me that as LH2550 has DVI connection, I can just plug the monitor to the computer, but I wonder if this method is accurate enough to show the footage for color grading.
I also heard about AJA, but I really don't need any capturing. Is there any another cheaper way (yet still with good color reproduction on the monitor for color grading).
Thanks a lot in advance.
King

No...if you want to capture this is a good card. But get the LHi...the LHe isn't available anymore anyway. The LHi will upconvert SD to HD, and cross convert 720p to 1080i on the fly. As will the MXO2...
Shane

Connecting mac pro to Imac for screen share.

I have connected my mac pro to my Imac so i can use the Imac sceen. I hooked directly with a dvi cable. The Imac screen is
immediately "taken over" by the mac pro when I make the connection. My question is, is there a way to disconnect without having
to physically unplug the connection?

See if there is anything in this Link...
Using 27” iMac as External Display
http://support.apple.com/kb/HT3924?viewlocale=en_US

Connect Mac Pro to iMac

I have a Mac Pro 1.1 with a fried video card. Can I connect the Mac Pro to an iMac via FireWire to read/copy the files?

Your iMac does not support Target Display mode
http://support.apple.com/kb/ht3924#4
hus yo will have to use screen sharing
OS X Mavericks: Share your screen
or this program
ScreenRecycler
Yo wil need a real dis[play to set the Mac Pro up

Connecting Mac Pro and Movies

Equipment owned:
17 500GB external hard drives linked to Mac pro via USB and Firewire hubs
My experience - limited
My questions:
If I buy the AirPort Exterme Base Station will the 802.11n be as fast as hard wired USB and Firewire?
Will wireless enable me to stream ripped DVD's from my external hard drives through the USB connection via Airport extreme wireless to my Mac Pro to my projector?
Many thanks
Rob

Not really. You can remote desktop from one computer to the other by the built-in Remote Desktop feature. You can't computer computing power

Connect Mac Pro 1,1 to WiFi

How can I connect to a wireless router on my Mac Pro 1,1.

Probably the easiest to try is this
http://www.amazon.com/gp/product/B008HO9D7M/r
Finding a Mac Pro 1,1 compatible wireless card is another. Some of those interferred with and cause problems with 10.7.x
http://www.google.com/search?q=wifi+mac+pro&sitesearch=xlr8yourmac.com

Using AP express to connect Mac Pro w/o airport card to internet

Hi, I am using an Airport Express station to connect my Mac Pro to the internet. I am doing so by having my Airport Express connected to my main Airport Extreme base station and have the Mac Pro plugged into the Airport Express' ethernet port.
Once I do this everything works fine and my Mac Pro gets really fast internet for about 5 minutes and then it cuts out completely. Nothing can get the internet working except unplugging the Airport Express and plugging it back in.
Anyone know what the problem is?
My Mac Pro doesn't have an Airport card and only needs to connect to the internet once a month for updates so it is not worth it to install one.
Any help would be appreciated.

Correct if you want to use the Thunderbolt connector on the Mac.
The curious thing is.....the Mac can connect to the Express at up to 300 Mbps using wireless, but will be limited to 100 Mbps using the Ethernet port on the Express.
So, if you are looking for connection speed, wireless may well be much faster than the Ethernet connection.

Connection mac pro and tv sony bravia

Hi guys, I got a mac pro 13" with osx 10.8.2 and I'm trying to connect it with a tv sony bravia KDL-40V5500 via HDMI cable.
I simply want to use the tv monitor as the mac monitor... I connect it with the cable dvi-hdmi but it doesn't work.
the tv firmware is the latest version available ( 2010), I' ve also tried with a samsung tv and it works perfectly so I don't get why with this sony doesn't fit.
the mac recognize the sony tv but the screen is always black... I tried with every hdmi port on the tv ( they're 4)
I also wrote to sony support team but the response was that must be an error setting on the mac...
every tips will be pleased
Andrea

RESTART! got it.

Connecting Mac Pro to Time Capsule to get wireless network!

My brother just bought for me the newest Mac Pro with MAC OS 10.6 and already have a TIme Capsule. At the Apple Store they told him that there was no need for him to buy a AirPort Extreme Wi-Fi Card, because I already have Time Capsule and through it I could connect my Mac Pro to my wireless network at home. Is this right?
The router of the internet is located at my living room and the time capsule is at my bedroom. What I'm trying to say is... Can I use the Time Capsule as a AirPort Extreme Wi-Fi Card for my Mac Pro?
I'll wait anxiously for an answer.

You seem a little confused. The Mac Pro must have a wireless card installed inside and connected properly. Then you can wirelessly connect to that Time Capsule.
If you do not have the card installed inside that Mac Pro then figure a way to run fast cat ethernet cable to the Time Capsule.

Hello people how can i connect mac pro imac as monitor whit mini display

hello people i have aproblem with my comp mac pro with 5770 ati card i want to use that to let the imac use as monitor oke please respons i am from the duth

Language problem I think -- mac pro is not a monitor. Do you want to use a monitor on a mac pro as a second monitor on the imac? Or do you want to network the mac pro with your imac? Or do you want to use the imac as a second monitor on your mac pro?

Connecting Mac Pro to Dell monitor

I have connected Macpro to Dell DVI monitor, the Dell will show the Mac home screen, but stays on that screen when i change to a different screen (on Mac)?

You have it set up as an extended desktop rather than mirroring. That means you can drag a window from your MBP onto that monitor. It's like an extension of the existing monitor. If you want mirroring, which shows the same on both, go to Displays in System Preferences and change it.

Connect mac pro to jetdirect 600N

Similar Messages

Maybe you are looking for