Connect macbook pro 13" (2.7 GHz) to a plasma panasonic 42" TV with a rocketfish adapter

(macpro13" 2.7GHz) I have a rocketfish HDMI adapter connected to a 42 inch plasma panasonic and it is not displaying any video or audio (does display blue screen as if properly connecting). attempted to play music and got occasional pops. Why is it not connecting properly?

This is my exact problem. I have had 2 of these drives so far and both of them have had the same problem with installation internally. The first one I was able to get operational using the method you described, ie: put the OWC SSD in an external case (FW800 was my choice) and install it there. But I encountered the sleep issues, so I sent it back for a replacement.
The second drive I was finally able to install using the second method, but now the computer regularly locks up. So I'm going to call again and hopefully the third try will work.
Just to clarify. The first drive had sleep issues, but had the older firmware. The second drive had the newer firmware (360 I think it is) and didn't have the sleep issues, but locks up while running.
I'm so irritated on how many hours I've spent on this issue. And their support department, though very nice, wasn't helpful at all. It's as if they never heard of this problem.

Similar Messages

Connecting Macbook Pro 15" to Samsung HDTV - Audio Problem

Hey guys,
I'm new to these forums so I hope i'm posting this in the correct section! On to my problem...I have a MacBook Pro 15" 2.8 GHz- Late 2009 (model: MB986LL/A) and I'm currently trying to connect it to my new TV which is a Samsung LCD HDTV (model: LN46C610).
The video connection is perfect. I'm using Apple's Mini-DisplayPort to DVI, via DVI to HDMI to my TV.
The audio connection for some reason is not working.
I've tired using an RCA cable, which has a regular audio jack on one end, and the 2 coloured wires (yellow + red) at the other end. No luck.
Now I was told to buy a Mini-Toslink cable to connect from my TV to my MBP. I've plugged the Optical Cable into the TV and the other end to my MBP. Yet I still have no sound.
Can anyone please guide me on how to set this up? Maybe i'm doing something wrong or i'm using the wrong cable. Any help would be greatly appreciated!
Thanks!
Karman

Ok i'm in the Utility but i'm confused...where would I go to select it to change the output?
Because everywhere i've tried...I don't see an option to change it...
*EDIT: ok I've noticed when I plug in the mini-toslink cable to my MBP, i notice the output source changes from Internal Speakers to Digital Output*
*EDIT #2: Still no sound when I do that...also on the back of my TV, the digital output connection use to have a red light in it, and now it doesn't anymore?*
null

MacBook Pro i5 2.5 GHz/8GB RAM With Retina

Hi eveyone,
As many of you already did, today I've upgraded my MacBook Pro i5 2.5 GHz/8GB RAM from Mountain Lion (10.8.5) to Mavericks (10.9).
Unfortunately, I'm experiencing serious and unpleasant issues since I installed the upgrade.
Specifically, my monitor flickers almost every time I scroll an application window (e.g., Safari, Chrom or internet, either using an USB mouse or the trackpad.
Moreover, when I pass the mouse over the Dock, this starts vibrating from time to time.
After several reboots and given that one of the new features of Mavericks is the new management of external monitors, I've tried to re-install from scratch the OS X upgradewithout connecting my laptop to the external LCD but still nothing has changed.
I'm really annoyed by having both monitors flickering. Another particular thing is that if I try to click on the Finder menu appearing on the external monitor, this makes flicker the primary monitor approximately at the same coordinates (i.e., at the Finder menu of the laptop monitor).
It seems like something is going wrong with the video card drivers but this is just my conjecture.
Are you guys experiencing the same or is there anything you might want to suggest to solve these issues?
Thank you in advance
ANY HELP THERE ,IT IS REALLY DISAPONTEING THAT THIS IS HAPPENING WITH APPLE PRODUCTS HELP PLEASE
THANKS
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9)

do you solve this problem?Because ı am living same problem.

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

How to connect macbook pro to tv

How do I connect my macbook pro (2 -3 years old) to a tv? Bought an apple HDMI connecter, bought cable to connect to it and to tv, connected them but nothing happens.

how to connect macbook pro to tv

How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

It depend upon the model (age) of you MBP. If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
Or you can get an all in one:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
If you have an older mac with a DVI port, you will need something like this:
http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
Note that audio is supported via HDMI for MBPs 2010 and later. Earlier ones require tapping the audio output port.
Ciao.

Having problems connecting MacBook Pro 2010 TO vizio 60 " tv

having problems connecting MacBook Pro 2010 TO vizio 60 " tv using mini displayport to VGA adapter
non support warning appears pn tv monitor

However, I still don't get a view of anything on the desktop except for the standard Apple swirl.
Can you drag windows to the other display?
In the "Arrangement" tab of "Displays" system preference, you can drag the display pictures to match the actual arrangement, drag the menu bar to the other display, or enable mirroring.

Update: audio problems connecting macbook pro to insignia TV: resolved

There have been posts from users who have expressed frustration that they cannot get audio when they attempt to connect their macbook pro to an Insignia TV.
http://discussions.apple.com/click.jspa?searchID=-1&messageID=10830387
http://discussions.apple.com/thread.jspa?threadID=2192206
Insignia customer service also attempts to state that the pre-April 2010 macbook pros cannot get audio output to the TV, because the units are designed to get the audio on the same HDMI and no alternative audio input is available on the TV.
http://community.insigniaproducts.com/t5/Televisions/Connecting-MacBook-Pro-to-T V/td-p/5564
For the Insignia models (from 2010 onwards and possible some from 2009 as well), there is a simple workaround that does not seem to be published elsewhere on the internet (as far as I can see):
Use the HDMI port 1 only (audio does not work with port 2, port 3 or port 4) to connect your macbook and you will receive 1080p video signal.
Use a mini stereo audio cable (example link below) and connect your macbook audio output to a designated green color coded audio port on the TV located right next to the VGA. You will receive full stereo audio.
Example link for mini stereo audio cable:
http://www.amazon.com/gp/product/B00116VJIO

I recently acquired a new Insignia TV and had sound trouble. I went to Best Buy to inquire about the cable in the link above and the sales manager had doubts. He recommended a RCA cable with a male connection at both ends. The RCA jack is on the bottom edge of the TV display next to the VGA connection. The sound worked perfectly using the RCA cable from the headphone jack on the Mac. I connected the video with a HDMI adapter from the monitor mirroring port.

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

MacBook Pro 17" 2.16 Ghz - Ongoing Shut Down / Freezing Problems

After searching around the web for quite awhile and reading through as much as I can on here, I've finally run out of options and so thought I would post my experience / problem on here and see if anyone knows how to fix my problem.
My gear:
OS 10.6.7
MacBook Pro 17" 2.16 Ghz
Model Name:          MacBook Pro
Model Identifier:          MacBookPro1,2
Processor Name:          Intel Core Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MBP12.0061.B03
SMC Version (system):          1.5f10
Video:
Chipset Model:          ATY,RadeonX1600
RAM - 2 x 1Gb Chips
FUJITSU MHY2120BH:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHY2120BH
Revision:          0081000D
Serial Number:                  K439*****H4A
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Hard Disk:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          98.97 GB (98,967,773,184 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Problem:
Over the last few months I've had constant problems with freezing, shut downs. This might be in the form of I'll be working in iMovie editing some video and then mouse down into the corner to switch Spaces, the screen will half zoom out then just hang. Mouse won't respond, everything just sits there. I usually have to fix this by holding down the power button until the MBP turns off, then just reboot.
Other times I'll leave the computer on at night, wake up in the morning and it will either be off and as such, I just have to press the power button and it boots up again. Or the screen will be off, metal above the Function keys will be cooking, but the computer isn't responding, just a blank screen. I hold down the power button until it turns off and then reboot again.
These problems were getting worse. It has gotten to the stage where it might freeze a couple of times a day.
Seems the problem only occurs when the MBP is working. I might leave it rendering at night and wake in the morning to find it off etc.
Will also sometimes get horizontial lines in apps. I shut them down and start them up again and it's fine. But it's like the graphics card is struggling big time.
Actions to Fix:
- Started with repairing the permissions, but I always found that it had lots of items to repair, would repair then, but then if I verified again, the same things would come up as needing to be repaired. I also tried booting from the OS X DVD and repairing from that version of Disk Utility, but same result.
- Created new admin user account, to see if problem was just limited to my account. Same problem.
- Ran AHT from the MBP DVD that came with the MBP and it passed the hardware test. Though I couldn't find anywhere to make it run an extended test. The test I could run would only take about 10 minutes I believe.
- Erased the HD and fresh install of 10.6.3 from DVD, then software updates to 10.6.7 (yesterday). Repaired permissions after each step. After the OS upgrade I got a decent list of items that needed to be repaired, and after repair, would still show as needing repair. I checked the KB and it listed a lot of files that might get this error, but that it was ok to ignore them.
- Was editing video this morning in iMovie again, running Disk Utility on an external drive and boom, the MBP locked up again
I've gone through the /logs/crashlog in both the root and home user folders. After nearly all crashes these are empty, so it's not even reporting it anywhere.
Can anyone shed any light on whhat might be causing the problem?
<Serial Number Edited by Host>

Actually, when I was at the Apple Store I had both laptops flat, with the screens at 90 degrees. Pushing the screen forward and back with my fingers (via the top of the screen of course), the 15" easily has twice the hinge resistance. With that kind of test, weight isn't a significant factor -- that 17" hinge on a 15" laptop would probably cause the screen to come crashing down, too.
There were a few people in these forums who said their 17" was actually too tight (wish I had that problem!). It seems like a quality/consistency problem that could easily be fixed by A) measuring the force required to move the screen back and forth before screwing the case together, and B) making the hinge tension adjustable.

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.

I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.

As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help.

Connecting Macbook Pro osx10.6.8 to flatscreen vis HDMI. Only suggestions I have seen is to use Mirror Image in sysPref displays. I don't see any mention of mirror image in displays. Won't connect

Connecting Macbook Pro osx10.6.8 to flatscreen vis HDMI. Only suggestions I have seen is to use Mirror Image in sysPref>displays. I don't see any mention of mirror image in displays. Won't connect

I am asking the Moderator to move your post to the MacBook Pro forum, this is an iMac forum.
Good luck.

HT201180 What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

USB is the slowest. Firewire is faster. eSata is the fastest (and will be superceded by Thunderbolt). The old Fire was 4 pin (Firewire 400 and is essentially obsolete), new is 9 pin, Firewire 800. All of the will transmit data, simply a different speeds.
For eSata connectivity, you MBP must have an express card slot (and the appropriate eSata connection card) and you external enclosure must have an eSata input. eSata cables will only transmit data, therefor it will require power by Firewire or USB cables.
Ciao.

Connecting macbook pro to cintiq 21 ux

is there an video adapter that'll work between the cintiq 21ux and the late 2008 macbook pro? i was wondering if there was a mini displayport to dvi-i adapter which it seems to need. thanks for your help

I just bought the new macbook pro uni body late 2008 model. Great until I hooked up the 21ux Cintiq. That is when my education began about dvi connections. It's turning out after numerous calls to Wacom/Apple and visits with a "genius'' at the genius bar that NO ONE knows how the resolve this. Wacom is sending me an updated dvi-i to dvi-d adapter cable that they now stock with new models as we thought it was an older dvi adapter that came with the 2007 cintiq 21ux. Apple is going to get back to me by tomorrow as they put my situation about this issue as urgent with the engineers at Apple and I will find out tomorrow if the dvi dual link adapter used for the 33" monitors (that I found out today is experiencing problems as well with the new mini display port) will resolve this problem. I have the 12" cintiq as well and works perfect with the macbook pro because it has a dvi-d plug. I even tried hooking the 21ux up to my macbook (white model, early 2008) and the there was no luck. So, as the genius at apple said...if it doesn't work, they will refund me fully and I'll just wait it out until Apple resolves this connection issue. But I will find out tomorrow if Apple can resolve this or whether there are any plans to resolve it...I'll keep you all posted....
BTW, it was admitted to me by Apple that really this is Apple responsibility to resolve as they were the ones introducing the new port design.

Connect macbook pro 13" (2.7 GHz) to a plasma panasonic 42" TV with a rocketfish adapter

Similar Messages

Maybe you are looking for