Connect Macbook to TV coaxial input

My daughter has a Macbook and a small, older TV in her dorm room at college. Is there a way to connect the Macbook to the coaxial cable connection on the TV (the only input option available) in order to use the Macbook as a DVD player? And do it without spending more money than the TV is worth?

Actually, one of my two VCRs does not allow me to pass-through commercial DVD signals because of the Macrovision protection. So, going through a VCR may or may not work correctly. It might be safer to try something like an RF Modulator from Radio Shack:
http://www.radioshack.com/entry.jsp?source=PE&entry=2103096
You'd still need the mini-DVI to video adapter, an s-video cable and some kind of audio "Y" adapter cable to split the headphone audio to RCA for the modulator.
-Doug

Similar Messages

  • Wirelessly stream from macbook to tv with only coaxial input

    I was hoping for some help. I travel a lot and end up in hotels with TV's that only have a coaxial cable input. Is there a way and what products do I need to wirelessly stream media mostly video from my macbook to a tv with coaxial input only. I have a RF converter so I can stream from an ipod to TV's like this. But I would like to stream items on my laptop. Since this is typically for travel, I dont need advice about using an apple tv, etc. Was just hoping someone would have been in a similar situation and can offer me some inexpensive and easy to travel with advice. Many thanks in advance.

    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
    The Mini-DVI to HDMI doesn't carry audio. If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug.
    The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. Check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
      If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • Best Way to Connect MacBook Pro (without Mini Display Port) to HDTV?

    Hello,
    Although I am fairly confident that I know at least one answer to this question, I thought it would be best to pitch it to the members of Apple communities, just to see if there is a better way to get to where I need to go. I have a MacBook Pro that I bought in July of 2007 for college. At this point, I know that it is fairly out of date, but I'm reluctant to throw down another three grand for a new one until I absolutely need to. Anyway, I want to connect it to my HDTV to play movies, games, etc. As this is an old model of the MBP, the Mini Display Port is not available. I do, however, have an Apple DVI port, as well as the (then included) Apple DVI to VGA cable/converter. Now, I know that VGA cannot transfer sound, but I think that DVI can. So here's my problem. If I create a bridge of wires to my HDTV, would sound come through? My idea is this: connect Apple DVI to VGA, then have a VGA to DVI converter, then have a DVI to HDMI cable, which connects to my HDTV. With all of those connections, however, I'm worried that something will go wrong along the way, and it won't work out. What I really need is an Apple DVI to HDMI cable, but I'm pretty sure those do not exist.
    Anyway, I was just looking for any feedback that anyone has. Thank you in advance!
    Best,
    Daniel

    danz0r wrote:
    Hey tjk,
    Thanks for the response.
    Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
    With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
    http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
    Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option.

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

  • Connecting macbook to TV (other than HDMI)

    I own the mini display port adapters to both DVI-D and VGA.
    Connecting the DVI-D from the macbook to the HDMI input of my TV using a simple cable works fine. However, my TV has only one HDMI input and I would like to use it for something else. Instead I'd like to use either of these available TV inputs: YPbPr, S-Video, Composite.
    Since all of these use analog signal, it seems I can't connect them to the macbook DVI-D output. But I would expect a simple, cheap way to connect the macbook VGA output to one of these three. Suggestions?
    TIA

    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10401&cs_id=1040113&pid=2509&seq=1&format=2
    you can try this.. I have no experience in this but I assume this is what you are looking for.

  • Update: audio problems connecting macbook pro to insignia TV: resolved

    There have been posts from users who have expressed frustration that they cannot get audio when they attempt to connect their macbook pro to an Insignia TV.
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=10830387
    http://discussions.apple.com/thread.jspa?threadID=2192206
    Insignia customer service also attempts to state that the pre-April 2010 macbook pros cannot get audio output to the TV, because the units are designed to get the audio on the same HDMI and no alternative audio input is available on the TV.
    http://community.insigniaproducts.com/t5/Televisions/Connecting-MacBook-Pro-to-T V/td-p/5564
    For the Insignia models (from 2010 onwards and possible some from 2009 as well), there is a simple workaround that does not seem to be published elsewhere on the internet (as far as I can see):
    Use the HDMI port 1 only (audio does not work with port 2, port 3 or port 4) to connect your macbook and you will receive 1080p video signal.
    Use a mini stereo audio cable (example link below) and connect your macbook audio output to a designated green color coded audio port on the TV located right next to the VGA. You will receive full stereo audio.
    Example link for mini stereo audio cable:
    http://www.amazon.com/gp/product/B00116VJIO

    I recently acquired a new Insignia TV and had sound trouble.  I went to Best Buy to inquire about the cable in the link above and the sales manager had doubts.  He recommended a RCA cable with a male connection at both ends.  The RCA jack is on the bottom edge of the TV display next to the VGA connection.  The sound worked perfectly using the RCA cable from the headphone jack on the Mac.  I connected the video with a HDMI adapter from the monitor mirroring port.

  • I use iwires to connect macbook to lg tv to watch netflix.How do I increase screen size on tv.I have tried display options on settings- not working

    I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working

    I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

  • Connecting Macbook to Old Tv

    Hi,
    Im new to macs, I have a MacBook Pro 10.6.8,  and would like to connect my mac to my very old TV, it has what i think is called a composite connection (it has 3 leads, red, yellow and white) please could someone tell me what i need to do this.
    Im not very technical im afraid so please help
    Thanks in advance

    Your MacBook Pro has the new Thunderbolt connector which uses a Mini DisplayPort adapter to output the video signal.
    If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite (Composite is the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs.). You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video.http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
    The audio may not pass through which means you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs for Composite. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

  • HT201180 What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    USB is the slowest. Firewire is faster. eSata is the fastest (and will be superceded by Thunderbolt).  The old Fire was 4 pin (Firewire 400 and is essentially obsolete), new is 9 pin, Firewire 800.  All of the will transmit data, simply a different speeds.
    For eSata connectivity, you MBP must have an express card slot (and the appropriate eSata connection card) and you external enclosure must have an eSata input.  eSata cables will only transmit data, therefor it will require power by Firewire or USB cables.
    Ciao.

  • My Sony Bravia KDL-40CX520 does not have a coaxial input for my digital antenna...

    What can I do if my tv has no coaxial input for my digital antenna?
    Thanks...
    Update: I found a Euro connector which got me the connection I needed. However, I am still unable to locate any digital antenna channels within the 50 mile radius of the antenna/w amplifier.

    HI nikkijordyn,
    Welcome to the Sony Community!
    IMPORTANT: Before we proceed further, please check the supplied manual of the TV to confirm if the television is set to NTSC or PAL. US is under NTSC video system. 
    If the TV is set to NTSC, please perform the troubleshooting steps below:
    Upon checking the specifications, this TV has RF input that connects to your cable or over-the-air antenna.
    If no digital channels can be found, then there may not be any digital channels currently available. Perform an Auto Program to have the TV search for any available digital channels.
    Perform Auto Program, please check the steps below:
    Press Home button on the remote
    Go to Channels and Inputs
    Select Auto Program
    NOTE: We cannot guarantee the functionality or compatibility of those 3rd party devices. 
    If my post answers your question, please mark it as "Accept as Solution"

  • Re:  Not getting audio from TV when connecting MacBook Pro with all correct cables.

    How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

    Hi Lynn,
    If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

  • How to connect macbook pro to tv

    How do I connect my macbook pro (2 -3 years old) to a tv?  Bought an apple HDMI connecter, bought cable to connect to it and to tv, connected them but nothing happens.

    how to connect macbook pro to tv

  • How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

    Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

    It depend upon the model (age) of you MBP.  If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
    eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
    Or you can get an all in one:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
    If you have an older mac with a DVI port, you will need something like this:
    http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
    Note that audio is supported via HDMI for MBPs 2010 and later.  Earlier ones require tapping the audio output port.
    Ciao.

  • Having problems connecting MacBook Pro 2010 TO vizio 60 " tv

    having problems connecting MacBook Pro 2010 TO vizio 60 " tv using mini displayport to VGA adapter
    non support warning appears pn tv monitor

    However, I still don't get a view of anything on the desktop except for the standard Apple swirl.
    Can you drag windows to the other display?
    In the "Arrangement" tab of "Displays" system preference, you can drag the display pictures to match the actual arrangement, drag the menu bar to the other display, or enable mirroring.

  • Can't connect macbook pro to internet with airport extreme

    Can't connect macbook pro to internet with airport extreme

    If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
    Tell me how the Airport is setup.. what broadband modem and router you have.
    What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
    Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
    Upgrade to Yosemite??

Maybe you are looking for