Connect mini DV and nothing happens
i have a panasonic PV G150 mini DV recorder
connect to computer with USB and firewire and nothing happens
is there something else i can try
You need to connect via FireWire only to import the miniDV recordings into iMovie. The USB connection is just for downloading stills from the camera.
So connect just the FireWire cable, otherwise you'll confuse things.
If the camcorder doesn't show up, or no Import screen starts up, you may have to connect the camcorder to mains electricity - via its mains charger/adaptor - instead of running it on its battery: several camcorders require mains juice in order to offload their video to a computer - this may be one of them (..I don't know for certain).
If it still doesn't show up, switch the camcorder to Play mode, and restart iMovie. iMovie should then recognise that video is coming down the FireWire cable, and should show its Import screen.
If nothing at all happens, try a different FireWire cable. The cable should, of course, look like this..
The larger end goes in your Mac, and the smaller end into the DV/FireWire/i.Link hole in the camcorder ..which looks like this:
Similar Messages
-
Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help
Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/ -
I reset my phone now no service and says connect to itunes and nothing happens
i reset my iphone4s and now it says connect to itunes and nothing happens have no service either
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
i just updated my iphone to the latest update and my phone now has a picture of the connection cable with an arrow pointing to itunes. I plug it in and connect to itunes and nothing happens. HELP.
Hello JBH 1162
Check out the articles below to get your iPhone to show up in iTunes so it can be restored. Start with the first one to see if you can make any change to show up in iTunes and if it does not, then pick either the second or third article for the type of computer that you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
How can i get my ipod unlock. It says iPod is disabled connect to itunes, when i connect to itunes from my computer nothing changes on the ipod.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I keep getting a pop up on my iophone 5 that says "connect to itunes to use push notifications" I've connected to itunes and nothing happens. I cant use the phone as I can;t get the pop up to stop
So after exhausting countless hours I just added the App "Google Search". It's not as great of an interface but I can access Google Voice and keep tabs by just checking in every so often. Better than not having Google Voice at all.
-
my ipad mini has water damage but when I plug into wall it says to connect to itunes. When I plug into Mac nothing happens. Not even a charging sign and nothing happens with itunes. Computer doesn't recognize it's plugged in.
If moisture got inside, it may have shorted the iPad's electronics.
Solutions for wet iPad.
http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
Cheers, Tom -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks -
Ever since I updated to the IOS 6, I no longer can play my music in the car! It is plug and play! It just sits there saying connecting and nothing happens. A couple of my friends have said the same thing. Any ideas? Help please!
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
When I turn my Ipad3 on I get a message that states IPad is disabled.. connect to ITunes. I have done this and nothing happens. What else might I try?
Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
I just updated my phone and it said connect to itunes, I plugged it in and opened itunes and nothing happened, what do I do?
Hi Millers0,
If you are having isssues with your iPhone after a software update and you are being directed by the screen to connect it to iTunes, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
I cannot make a simple purchase of a $.99 of Beethoven's 9 symphony 4th Movement. When I click on the orchestra, a pop-up states "connecting - loading" and nothing happens. When I click on "View iTunes" for this selection, nothing happens.
AlexCarey, I've been having issues purchasing recently and place a number of calls to the support team. On Oct. 5th, and on my own decision, I went into my itunes profile and re-entered my credit card expiration date and security code. (Notice, it is not displayed for safety measures.) Today, I received an email from Apple support verifying if I made changes made to my account. For the heck of it, I logged back into itunes; click "Buy". It's working again after three days of failure. However, diagnosis still displays "Secure link to itunes store failed". Very confusing state of affairs, lately. See my post on "Itunes dilemma"
-
I connected to the internet with my IPAD, however when using Yahoo search for a topic, the screen comes back grayed out with the topics the search found and nothing happens when clicking on a topic - cannot move around once the search comes back.
Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have a macbook air and I connect it to an external HDD via thunderbolt and nothing happens....
If a PRAM reset fails to help, an appointment at the Apple store genius bar would be the next option.
http://support.apple.com/kb/ht1379
Ciao. -
I'm trying to install software from Yamaha keyboards to connect my keyboard to my computer. I insert the CD and nothing happens. Yamaha told me to "find your CD drive" and open the software. How do I find the CD drive?
When you insert a CD/DVD in the optical drive, does an icon appear on the desktop? If not open Finder Preferences and check the appropriate box(s).
Ciao.
Maybe you are looking for
-
Im locked out of my ipod and i just got a new computur and wont sync?
I lost my ipod (in the couch) for like a year. My stepmother found the one i lost and locked me out, im not really sure what the password is anymore, i cant try because it doesnt work. And i got a new laptop recently and moved all my music and my acc
-
I have had to format my pc hard drive 4 times. What happens if you have to sign a computer on itunes after the fifth time?
-
I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.
-
How can I get in contact(email) with people who answer my questions
1
-
Using NVL function in subselect of an update
Hi, nvl is not working in my situation Here is my select SELECT nvl(a.id, 'WAS NULL') FROM table_1 a, table_2 b WHERE a.id=b.id; Now here I get NULL instead of 'WAS NULL' as I accepted. Table a and table b do not have any identical ids, still I need