Connect Mobile on iOS opens Safari when trying to join meeting

On Adobe Connect Mobile on iPad, after I type the meeting url and click "next", Safari opens and loads the url, asking me to install Flash player.
Why is it that I'm directed away from Connect Mobile?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Similar Messages

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

ICloud mail is down again...mine allows mail to open, then when trying to address an email I get a beach ball and it stays until I quit mail. Anyone experiencing this and what is apple doing about this?

I like many have been experiencing mail problems since I migrated to iCloud. Was working fine for a bit, then I now either get crashes or a revolving beachball when I attempt to type an email address. Have tried quitting and rebooting...you name it. What is Apple saying or doing to fix the problem. Been like this all weekend.

iCloud mail is down again...mine allows mail to open, then when trying to address an email I get a beach ball and it stays until I quit mail.
That doesn't necessarily mean the mail is down in iCloud.
You can always check iCloud system status here.
If you are using Safari to access iCloud.com, go to the Safari menu bar click Safari / Empty Cache.
Now go the menu bar again and click Safari / Reset Safari.
Select the top 5 boxes then click Reset.
Quit then relaunch Safari, go to iCloud.com
Try Mail.

Why do I keep getting an "authentication failed" message when trying to join my network?

Why do I keep getting an "authentication failed" message when trying to join my network?

You may have to shut your computer off and pull the power adapter from both your ISP's Modem and your Router and wait 5 minutes and restart them in the following order.
1st your ISP's Modem and wait a minute to get your signal and lights.
2nd do the same with your Router and again you have to wait the minute.
Last restart your computer and boot in OSX use Safari.

Wlc 4402 errors when trying to join ap

Hello,
I have a wlc 4402 controller with software version 6.0.199.4
now i have problems adding 1131 aps to my controller.
in the pas i added 15 access points (withouts problems) but
now doesn't seems to work anymore.
here's what i got from controller when trying to join
*Nov 11 12:24:37.739: %LWAPP-3-RADIUS_ERR: spam_radius.c:138 Could not send join reply, AP authorization failed; AP:00:13:c4:93:c1:58
here's what i got on the AP (console cable on my pc when booting)
%LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no certs in the SSC Private File
Got an idea on this ?
thanks for help

Was the AP in automatic mode before? Did you copy the LWAPP recovery image to the AP using tftp?
All APs manufactured before 2005 or 2006 do not have MIC (manfacture install MIC) installed. You need to use LWAPP conversion tool to convert the AP to LWAPP/CAPWAP; so that the conversion tool will install SSC (Self Signed Certificates) to build the encrypt the LWAPP/CAPWAP control traffic:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
As LWAPP discovery image is already there, you need to convert the AP back to autonomous mode and use LWAPP conversion tool to conver the AP:
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38trb.html#wp1058472
I hope that the mode button is not disable on the AP. if it does, I hope that the break key is not disable. If both the mode button and break key are disable, you need to RMA the AP.

Grey screen on safari when trying to open pdf files

Yesterday I was reading a pdf file in my safari 3.0.4 web browser when safari froze unexpectedly and crashed. When I re-opened safari, I am now no longer able to view pdf files in the browser or at all. It opens up, starts loading and stays at a grey screen. I'm using adobe reader 7.0 and I've never had problems before but this is really frustrating to not be able to open up pdfs anymore!
Also, I downloaded firefox to see if it would work on there and it works to download and view pdfs but I can't seem to view pdf files directly in the firefox browser without downloading them to the desktop. What should I do?

You're welcome Joanne. Glad to hear all is functioning in the PDF realm.
When you get a chance, click on "My Settings" on the right side of the screen. There, you can change your tag to reflect the latest version of your OS. As you are using Safari 3.0.4, it would be either Tiger's 10.4.11 or Leopard's 10.5.1.
Mahalo for the and
Aloha from Big Island.

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Can't open safari. when I go to HD, then library...there is no input manager only input method and it is blank

I can't open safari. I tried Mac HD to library...it does not show a input manager, only methods and there are no files associated with it. This just started this
morning. Firefox works.

Hi,
There are two libraries. One is System one is your User account.
InputManagers folder is in the system library.
Open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder. The Input Managers folder is in there.
I think you are looking in your "users folder" which you can access in the same Finder window by selecting your user account (it has a small house icon).
I saw your post here. https://discussions.apple.com/message/15025894#15025894
If you think you have the Community Toolbar installed you need to check these folders.
/Library/Application Support/ Move the Conduit file to the Trash.
/Library/Application Support/ Move all of these files to the Trash: SIMBL/Plugins/CT2285220.bundle
/Library/InputManagers/ Move CTLoader to the Trash.
/Library/Receipts/ Move ctloader.pkg to the Trash.
/Library/ScriptingAdditions/ Move any Conduit / CTLoader related files in that folder to the Trash.
/Users/<User name>/Library/Application Support/ Move Conduit to the Trash.
Carolyn :-)

Error in safari when trying to search in Google's Bar

Does anyone had this exception throat ever?
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
Reading symbols for shared libraries ................... done
/Users/SEGONQUART/1418: No such file or directory.
Attaching to program: `/Applications/Safari.app/Contents/MacOS/Safari', process 1418.
Reading symbols for shared libraries ...................................................................................... done
0x01a37d75 in ***::HashTable<WebCore::String, std::pair<WebCore::String, ***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)>, ***::PairFirstExtractor<std::pair<WebCore::String, ***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)> >, WebCore::CaseFoldingHash, ***::PairHashTraits<***::HashTraits<WebCore::String>, ***::HashTraits<***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)> >, ***::HashTraits<WebCore::String> >::contains<WebCore::String, ***::IdentityHashTranslator<WebCore::String, std::pair<WebCore::String, ***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)>, WebCore::CaseFoldingHash> > ()
Program received signal EXCBADACCESS, Could not access memory.
Reason: KERNPROTECTIONFAILURE at address: 0x00000004
0x01a37d75 in ***::HashTable<WebCore::String, std::pair<WebCore::String, ***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)>, ***::PairFirstExtractor<std::pair<WebCore::String, ***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)> >, WebCore::CaseFoldingHash, ***::PairHashTraits<***::HashTraits<WebCore::String>, ***::HashTraits<***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)> >, ***::HashTraits<WebCore::String> >::contains<WebCore::String, ***::IdentityHashTranslator<WebCore::String, std::pair<WebCore::String, ***::PassRefPtr<WebCore::Archive> ()(WebCore::SharedBuffer)>, WebCore::CaseFoldingHash> > ()
(gdb)
I'll be glad to know what is bthe misuse.

Greetings,
Do you see this error in Safari after you try to do a Google search, or is this the product of a crash report after Safari crashes when trying to do a Google search?
What version of Safari are you using, and what did you do (or install) just before this started happening? Have you tried creating a new user account to see if the problem happens in that account? If not, do that.

TS1424 Cannot connect to iTunes Store keeps showing when trying to install updates

Cannot connect to iTunes Store when trying to update apps

I had this issue just yesterday. There was a message that said: Cannot connect to itunes store when i bought new challenges for a game. Later, when I checked my account, it still charged me money on my itunes card

Can't connect to essbase in Config Util when trying to config Pln Datsource

Hi,
getting the following in the configtool.log:
(Nov 20, 2009, 08:35:22 AM), com.hyperion.planning.HspDSEssbasePanelManager, DEBUG, Testing essbase connection HspJSHomeImpl.hspJS.TestEssConnection()
it hangs for hours after this. I can connect in eas and ping the server. tried using the IP as well? Any thoughts?

Hi,
Thanks for the reply.
Essbase seems to be running OK. I stopped the process and started it again via start menu.
This is what it writes to log file
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Oct 11 16:30:46 2011]Local/ESSBASE0///Info(1051051)
Essbase Server - started
Earlier in the log file we can see this:
[Tue Oct 11 10:55:08 2011]Local/ESSBASE0///Error(1042010)
Network Error [10048]: Unable to Bind Host Server Socket On Port [1423]
We still get the same error from EAS console.
Cheers,
Mari &Jarkko

Error when trying to join secondary to array

Hi All,
We had this problem about a year ago. Trying to join a secondary server to an array, we receive the following message javax.naming.CommunicationException: ErrTransportPermanent . No answer as to how it was corrected, but we were finally able to join the server into the array. Last evening we ran the 0214 Solaris 10 Recommended patch cluster, the problem has reappeared.
Have checked the host files for IP FQDN SHORTNAME , consistant across the servers.
Also checked /opt/tarantella/var/serverconfig/local/bootstrap.properties , consistant across servers, all showing the FQDN of each server.
NTP checks are consistant, 2 servers in EST the other 2 CST.
Strange in that one of the servers joined into the array is on the same subnet with the same configuration as the server giving the error.
Any thoughts ?
thanks
Sun Secure Global Desktop Software for SPARC Solaris 2.8+ (4.50.907)
Architecture code: spso0510
This host: SunOS 5.10 Generic_144488-08 sun4u sparc SUNW,Sun-Fire-V490

Dear Eric,
It's Domain Joined PC.
For 1, i deployed the CA role on the AD server, i also checked the CA, but no error report could be found.
For 2, the Date&time are correct and sync from AD time.
I post below blocked content, i am not sure if useful for error analyse.
Server Error in '/lwa' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could,
however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory
of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to
a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Strange behaviour on Safari when trying to submit form using iframe

Hi All,
Not sure if this is the correct forum to raise this question
I am using iframe based mechanism to submit my login from and it is working fine on each and every browser except Safari.Here is the HTML form I am using to submit the information
<iframe height="0" width="0" name="loginFrame" hidden="true"> </iframe>
<form:form action="${loginActionUrl}" method="post" commandName="loginForm" id="header-signin" target="loginFrame" name="header-signin">
<input type="text"   name="j_username" id="header-signin_j_username">
<input type="password" name="j_password" id="header-signin_j_password">
<input type="button" class="btn1" value="Sign In" id="login" formnovalidate="formnovalidate"/>
</form:form>
and here is the java-script code
$(document).ready(function(){
$("#login").live('click',function(e) {
      if(validateSigninForm('header-signin')){
          $("#header-signin").submit();
there are some additional JS code which is being used
if($('#header-signin_j_password').length){
    document.getElementById('header-signin_j_password').onkeydown = function(event) {
        if (event.keyCode == 13) {
         triggerSigin(this.form.id);
triggerSignin is simple using Jquery submit method to submit the form.
When I fill the password filed and press the enter button, everything is working fine and page is getting refreshed with the help of the iFrame, but if I click on the sing in button, Safari is opening a new browser window and sending null values to the back end server.
This behavior is only noticeable for the first time and if I click on the signin button second time, It will be working perfectly fine till I close the browser and open it again.
I am not sure what is going wrong here and this approach is working fine on all other browsers.
Can any one help me in this?

Okay I tried something new. I changed the email address listed under my account in the Server app, and then went back to add the short name again. This time it allowed the save. Then I went back to Server and changed the listed address back to what I entered as the short name, and it let me do that, too. I guess the order you do this in matters. Odd.

Wifi connected but can not open safari or you tubes

Hi please please help! Have got my new ipod touch for xmas and have connected it to my wireless router (the little wifi icon is showing as "on" on the screen) but when i try to connect to safari it says can not find server. I see that lots of people have had this problem but none of the answers I have seen so far work for me.
So, when I click on to the blue triangle next to wifi do I need to go to DHCP, BootIP or Static? There automatically appears an IP address and subnet Mask under DHCP but these are not the same as my pc. Which do I use?
Many thanks

Hi, not sure what MAC address is? I have an IP address for the wifi but it is not the same one that comes up automatically on the ipod DHCP setting, the one on the ipod is 169.254.1.12, it has a subnet mask setting of 255.255.0.0 and that is all´. My router begins with 192. Can you advise with this? Thanks

Connect Mobile on iOS opens Safari when trying to join meeting

Similar Messages

Maybe you are looking for