Connect my Exchange server via Wifi and EA6500

Hello, I have a problem. Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems. My old router, a Dlink dir655, never had this problems. Can anyone help me?

Make sure that you have replicated the settings of your old router to the settings of the new router and then try also to isolate this problem by using a laptop computer and check if it will work. The purpose of using a laptop is order for you to isolate if the problem is with the router’s firmware. Check if opening port 443 on your router will be able to fix this issue. You can also check the links below for further information about this concern.
http://community.spiceworks.com/topic/205984-unable-to-connect-to-exchange-server-from-mobile-device...
https://discussions.apple.com/thread/3413395?start=15&tstart=0

Similar Messages

  • Connecting to exchange server via web interface?

    Employer's exchange server has IMAP disabled and IT will not consider adding activesync for iPhone 2.0. Using the web interface via Safari is way too hard on an iPhone to be practical except in emergencies.
    Question: The new version of Entourage allows for retrieval and sync through a connection to the exchange web interface. It behaves just like it's connected directly to the exchange server, but is hitting exchange's web server.
    Is there anything like this for iPhone? Any way to retrieve mail into the native mail application (rather than web app) by polling the exchange web server?

    A few things. Neither will give you the functionality you seem to be after.
    1) Use Exchange OMA service (text based view via web) very quick compared to the full image web based application. Has read/write functionality but you are not going to want to write an email via this.
    2) Outlook 2007 supports http: access. You could use that to pull the data from your work account to say a home PC and sync your iPhone (albeit once a day).
    3) Ask them to install iTunes 7.7 on your work PC so you can sync (I think I know how this would go down in a company )

  • [SOLVED] Connect to Exchange Server via Thunderbird WITHOUT ExQuilla

    I'm a free software kinda guy, so it's painful enough to be forced to use an Exchange server for mail at work. I used the 60-day ExQuila trial for Thunderbird, and it worked great, but I'm not about to put money toward a project that goes directly against my wishes.
    So, I tried using DavMail (the AUR package), and it was able to connect to the server, but it denied my login credentials (credentials that were accepted when I attempted using the Outlook web client).
    Is there a reliable way to connect to Exchange using Thunderbird (or another client on Arch) without spending money?
    Preferably, I use as few extensions as possible and get to stick with Thunderbird as my client.
    Last edited by 2mac (2014-04-16 17:08:48)

    Couldn't stick with Thunderbird.
    The 3.12 update to evolution-mapi on the AUR works with the Evolution mail client, though, and I'm really happy with the results.
    Evolution isn't as bloated as Thunderbird.

  • Cannot connect to the internet via wifi and mobile data

    im having hard time connecting to the internet even if wifi has a very strong signal as indicated on the phone..i tried every solution that i found in the internet but to no avail..i tried restarting my phone..i tried turning the airplane mode on then switching the wifi on but still unsuccessful..even mobile data isnt working..i configured the apn manually applying the recommendations of the network provider but its still offline..how am i gonna connect to the internet..help me pls..thanks

    You might want to repair your phone with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Mountain Lion calendar and notes sync problems with exchange server via WLAN

    After upgrading to Mountain Lion calendar and notes do not sync anymore with my exchange server via WLAN. There are no syncing problems via ethernet if WLAN is deactivated. Mail works fine with both connection types. Similar problems known? Solutions?
    Thanks for any ideas.

    Exact same issue ... cropped up in the past 2 weeks. Constantly syncing and re syncing. Watching calendar events show up and disappear. Tried all the normal stuff including deleting and re setting up the entire acct ... no luck. It built out the whole calendar correctly ( from what I could tell) and then started to sync again and appointments randomly appeared and disappeared .....

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

    I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
    I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
    The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

    And by the way, Hi Everyone, how rude of me not to greet you in the post.
    Thanks for any help!

  • Writing client app to connect to Exchange Server 2013 and set OOF for users on vacation

    I am coding an C# app that should connect to Exchange Server 2013 on-premise (Servers Location is not in our Company). I`ve got an account (User and Pass) with readonly admin-rights for now and want to read and set OutOfOffice Objects for other users. I
    decide to use EWS Managed API over Autodiscovery but I am bit confuse how
    I tried to connect with "service.UseDefaultCredentials = true" and read contacts -> this code works:
    try
                ExchangeService _service
    = new ExchangeService(ExchangeVersion.Exchange2013_SP1);
                _service.Credentials
    = new WebCredentials("service.exchange",
    "1234", "domain");
                _service.TraceEnabled
    = true;
                _service.TraceFlags
    = TraceFlags.All; _service.UseDefaultCredentials
    = true;
                _service.AutodiscoverUrl("[email protected]",
    RedirectionUrlValidationCallback);
                foreach
    (Contact contact in _service.FindItems(WellKnownFolderName.Contacts,
    new ItemView(2)))
    var test = contact;
            catch
    (Exception exception)
                Console.WriteLine(exception);
    After that I tried the same with _service.UseDefaultCredentials = false; got error -> "The Autodiscover service couldn't be located." I am not shure if this "direct log on" is the right way, On msdn I've read about "delegate access"
    and "Impersonation" (NTLM and Basic Authentication) I'am a bit confused. Can anybody help me?

    hi,
    when you set a credential, you don't have to set the UseDefaultCredentials property (it is already updated).
    For autodiscover, you should try to set the property EnableScpLookup to True if you are in the Exchange domain or it is known by the current domain.
    Autodiscover uses a domain query (through Active Directory) and/or a dns query (this requires a DNS register for autodiscover.domain.net) to determine the access to the autodiscover service URI.
    Regards,
    Désiré GOVIN Refresh IT Solutions

  • Hello.....after updating to Yosemite, i can't get my exchange mail to work.  It keeps saying can't connect to exchange server and asks for my password.  My mail is still working fine on android phone and ipad2.  Can someone help?

    Hello....after updating to Yosemite my mail isn't working .  Keeps saying can't connect to exchange server and asking for password

    I am having this exact same problem with my gmail account. Hopefully someone will have a remedy.

  • My ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g

    my ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g - both are running 6.0.1 - I have tired several wifi networks but same result.

    Hi LandJ1980,
    I would recommend first trying these steps:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not work, this article has some additional ideas to try, even though you are only seeing this with the App Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers!
    - Ari

  • TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    Welcome to the Apple Community.
    You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

  • Hi Guys. I have an ipad version 5.1.1 that I want to connect to my office PC server via wifi. Any ideas.

    Hi Guys. I have an ipad version 5.1.1 that I want to connect to my office PC server via wifi. Any ideas.

    You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
    Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

  • I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, agree pressed but no further??

    I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, the page shping license agreement comes. As soon as I press agree, it asks me to wait for verification and then this error that there is no working internet connection comes, even though I have one and it works fine

    Try these steps as needed:
    Reset phone: press both the home and power buttons, releasing when the Apple logo appears
    Settings > General > Reset > Reset Network Settings.  You will have to re-enter WiFi passwords
    Connect phone to iTunes on your computer and update using iTunes
    iOS: How to update your iPhone, iPad, or iPod touch

  • Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
    Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

  • Outlook connection to exchange server problem

    We have a new domain and an existing exchange server. The problem is if i log in with a local computer account i can autodiscover and connect in cached mode to exchange no problem. If i then login with a domain user account the same computer (tried on other
    workstations) will fail to auto discover, fail to connect to exchange even with manual settings. I cant find anything obvious in Group policy.
    The server is setup with the latest 2013 Group policy templates with office 2013 templates
    Users not logged in with the new AD server can connect to exchange 
    Users not logged into the domain can access exchange server
    My feeling is its a local setting that is missing or needs to be changed in Group Policy but i am at a loss as to what it could be
    I have disabled roaming profiles too and it makes no difference.
    Any help would be greatly appreciated.
    Steve

    Hi,
    Sorry for my delay. According to your description, I summarize your issue to the following points:
    1. No problem when the user logs in Outlook with a local computer account in Cached mode.
    2. Can’t connect to Exchange from an cache mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
    3. Can connect to Exchange from an online mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
    It is right? If I misunderstand, please feel free to point it out. Additionally, I noticed that the server is setup with the latest 2013 Group policy templates with office 2013 templates. Please confirm
    if the Outlook cache mode is disabled by OTC or GPO. If there is following registry key applied on the machine:
    Software\Microsoft\Office\15.0\Outlook\Cached Mode
    Meanwhile, please try to install an Outlook 2013 with a fresh ISO file(Don’t use any template such as OCT template), see if the Cached mode Outlook can connect to Exchange server.
    Waiting for your updates.
    Regards,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for

  • What should I do if my keyboard is not working after updating to new OS Mavericks update?

    I have a 13" MacBook Pro that was purchased in January 2014. Recently I installed the recommended updates for OS Mavericks on my computer. I rebooted the computer as recommended and when I went to login lo and behold my keyboard will not function. No

  • Missing folder structure in zip file from Theme Editor

    Hi all gurus! I have an interesting problem with this background: I want to change the customer brand image in the portal header and do som other modifications. For this reason I have made a copy of one of the standard portal themes, as I'm supposed

  • External callers voicemail timeout 60 seconds

    I have 7.1.3 Unity system and the problem I am having is when an external caller goes to voicemail they are allowed to talk for exactly 60 seconds then the call will drop, no warning, or nothing.  Internal users calling between each other can leave o

  • Sound file for isight

    Hi there, I'm currently producing a training webinar, filming with iSight in imovie '09. The submission requirements for the webinar are (this is for Create Space for Instant video on Amazon, if that is helpful): Your source copy must contain only AU

  • Cannot trim or edit a movie created with a Sony Cybershot DSC-T200 camera?

    Hi there people. I've created some mpeg movies using my Sony Cybershot DSC-T200 then copied them onto my Imac. I want to trim the start and end of the movie which i know is possible within Quicktime as i've done it with other video formats from other