Connect of 2 SAP BW systems to one SAP Enterprise Portal

Hi!
I have 2 SAP BW systems that should be integrated into SAP Enterprise Portal.
I currently have already one SAP system entry "SAP_BW" within SAP EP.
Questions
Is it possible to define second entry for second SAP BW system in order to use 2 SAP BW systems with one SAP EP in parallel?
Where can I find appropriate documentation?
Thank you very much!
regards

Hi,
We have a pilot portal with BW DEV, QAS and PRD connected to it. So it is possible.
It may be more appropriate to post this in the portal forum to get expert advice.
Mathew.

Similar Messages

Loading two different SAP BW system from one SAP R/3

Hi all,
is it possible to load the data from one SAP R/3 4.7 to two different SAP BW systems in parallel?:
A) BW 2.1C
B) BW 3.5
I mean not because R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side.
Are there any other restrictions? Ar there any workarounds how to hande this situation?
Thanks,
m./

Hi dear,
I think you shouldn't have any problem!
Look at OSS Note 775568 'Two and more BW systems against one OLTP system' to have more details...
"R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side"...what's your plug-in version in R/3 ? I can't understand what do you mean with "R/3 Plug-In installed on BW side" !!!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here, my dear colleague !

How to connect 2 SAP BW systems to one SAP BO?

Hi
Two companies from the group I'm working for wants to connect their BW system to corporate BO system.
BW system are independent of each other. My concern is about SSO authentication.
Will it be any problem to configure SSO between BO and BW if 2 BW systems are defined there?
Does any one face this kind of lanscape challenge before?
Any other issue should I be aware of?
Thanks

There are different possibilities.
Since you are saying that you already have a connection with SWIFTNet (Make sure you also have a Swift Alliance Gateway account without which you will not be able to post messages to SWIFTNet.), I assume that you also have the SAP BCM in place.
Now if you want to place a message via FIN/FileAct, you can write a custom program to create a file that is in line with the Swift standards. You can find the details of the file formats, etc.. from the SWIFT site. For FileAct, additionally you will have to create a .par file along with the .FTA file. This is for the FTA to understand the parameters.
Once that is done, you can place the files in a folder and configure the FTA to pick up these files. This is for FileAct.
For posting messages via FIN, you can have another program to post these files to SAG (SAG supports web services) via SOAP.
Hope this helps.

Copy BEx Query from one SAP BI system to another SAP BI system?

Experts please help me to Copy a BEx Query from one SAP BI system to another SAP BI system?
Thanks in Advance.......

HI,
Just assume like below,
you are creating your query in Development server(BI),
Before creating query, you go to SE09(t code), here you create a workbench request by clicking the create button.
Give some description here to be identified by you in future.
Now a requested will be generated(ex: DW5K50098) with prefix of your server name.
now you go to query designer, you create query, when you save the query, it will ask you request, now you click button 'own request'. you choose request(create by you in SE09).
it will be saved under this request, now you will have one more request under your request in SE09
parent request(DW5K50098) and child request(DW5K50099).
First you click child request and relese(click lorry button in se09),second you click parent request and lorry button.
next steps will be related to your organization, you can ask your team leader, he will be taking care of it.
Regards,
Ranganath.

Do we have a list of SAP certified system integrators for HANA Enterprise Cloud

I am in a sales cycle and SAP services estimated price for implementation is to expensive and we are pitching HEC. Do we have a list of SAP certified system integrators for HANA Enterprise Cloud for ERP (Finance and Merchandising for Retail)?

Yeah, not sure why they took it out of the cloud interface.
But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

Connect two ECC systems with one SAP CRM 7.0

Hi Gurus!
I have to do a customizing for connect two ECC 6.0 and one SAP CRM 7.0, only I need the organizational structure from both systems and they need update when the structure from CRM has changes. The business partner goes to ECCs system by PI interfaces.
Both organization models are different, so I have to maintain and update depending the changes in the business.
But I don't know if this is possible, I don't know if we can do this by Middleware, ALE or PI.
Can you please, give your oppinion about this topic?
Best regards,
Eugenia.-

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

Connect BO to SAP-BW system without using SAP Intergation Kit.

Hi All,
How Could we connect and do reporting in BO from SAP system without installing SAP INTEGARTION KIT ??
Like we could read data from Oracle by simply creating a Oracle connection in Desiger and all the tables are visible at universe level.
Do we have any such metod where SAP INTEGRATION KIT NOT comes into picture. and we could either read SAP tables or cube at Designer level or at reportr level.
DO We have any Guide or document or way were we would not use SAP INETGRATION KIT .
Thanks !!

Hi,
Try this .. not sure i hope it will help
http://edocs.bea.com/wls/docs90/jdbc_drivers/oracle.html
http://support.businessobjects.com/documentation/product_guides/planningxir2/en/xir2_Oracle_Setup_Guide_for_BusinessObjects_Planning_11.20_en.pdf
Regards
Ashwin

Very Urgent! SAP Access via HCM Reports in Enterprise Portal 6.0

Hi SAP Experts,
it is very urgent.
When our Users execute Reports via HCM Reports in Enterprise Portal 6.0 and exit them via the Menu Button (Menu->List->Exit) in the Report result they can access SAP Backend via Easy Access.
My Question: Could we find out which Users and at what time they had accessed the SAP Backend via this gap?
Best Regards,
Nadin
I will reward Points!
Edited by: Nadin Schaa on Feb 12, 2008 9:48 AM
Edited by: Nadin Schaa on Feb 12, 2008 9:49 AM

Try these may be helpfull
U can find list of users in backend and also trancations codes they r accessing
SM04 -- u can find list of users
Regards
Krishna.

Client side system requierments for using enterprise portal??

Hi
Does anybody know if there are some official client side system requirements published for using the enterprise portal?
Also, is there any experience on client side requirements for having all features operating at a decent usability?
Regards,
Nana

Hi,
SUS is mostly untouched in SRM7.0 and it is still using BSP application.
Regards,
Ranjan

Do we need a SAP PI system to use SAP SRM enterprise services?

Hi,
I am working in a project where we need to use some enterprise services like ([Maintain Purchase Request|http://wiki.sdn.sap.com/wiki/display/ESpackages/MaintainPurchaseRequest]) for SAP SRM 7.x. We have an ECC 6 system also in the landscape but the middleware is a non-SAP one. My question is that to be able to use the SRM and Enterprise Services, do we need SAP PI or SAP CE in place. Any help or useful clue/pointers is appreciated.
Best regards,
Nilay

Hi Jesse,
Please refer to my blog for the details.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/06/13/transfer-of-central-contract-from-srm-to-ecc-using-web-services-without-pi
Regards,
Naveen

Integration of SAP e-Recruiting 6.0 in Enterprise Portal 7

Hi,
I'm trying to integrate e-Recruiting functionalities into our Portal.
The current situation:
SAP e-Recruiting 6.0 is set up (integrated on ECC 6.0), and works fine when using the BSP-front-end.
De ESS/MSS Business Packages are installed on the portal.
The system alias for e-recruiting is created (and tested).
My test user has the ESS Portal role, and the role "SAP_RCF_INTERNAL_CANDIDATE" in the backend system.
The problem:
When I log in with my test user, and go to "ESS" => "Career and Job". I have several options under "Job", being:
   - Applications
   - Apply Directly
   - Favorites
   - Search for Jobs
All of these are related/connected to the e-recruiting module. All of these functionalities work fine, when log in to the e-recruiting BSP's directly. But when I click on them via the Portal, I get the message "An internal error occurred. Please try again later."
When I go to transaction "SLG1" for a detailed error log, I see "The system accesses Customizing table T77RCF_sp_ID using parameters [0000]. There are no entries in the table for this."
When I use the BSP-pages, I can set the parameter RCFSPID via a parameter in the URL (e.g. "application.do?BspClient=800&BspLanguage=EN&rcfSpId=0001"). And via this parameter, the system knows which recruiting-role I have (e.g. 0001 = Internal candidate and 0002 = External candidate). But this value is not transmitted to the BSP pages when I access them via the Portal.
What I tried was editing the iview "Career and Job Services". I set the value "Parameters forwarded to BSP" to "rcfspid=0001". But that was not the solution.
So finally my question:
Where do you set this parameter?
Thanks!

Hi,
Other applications are fine (although the Portal is not 100% set up yet). I think this is related to the link between the portal and the e-recruiting module.
More details:
Serious error; see log
    - The system detects a technical inconsistency.
    - The operation will be terminated.
The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
     - Termination takes place in:
     - Main program: CL_HRRCF_ABSTRACT_CONTROLLER==CP
     - Subroutine: CL_HRRCF_ABSTRACT_CONTROLLER==CM001
     - Line in source code: 56
Customizing table T77RCF_sp_ID contains no corresponding entry for [0000]
     - The system accesses Customizing table T77RCF_sp_ID using parameters [0000]. There are no entries in the table for this.
     - Either a program error or an error in Customizing exists.
The error occurred in program CL_HRRCF_T77RCF_SP_ID=========CM001 line 25
      - Termination takes place in:
      - Main program: CL_HRRCF_T77RCF_SP_ID=========CP
      - Subroutine: CL_HRRCF_T77RCF_SP_ID=========CM001
      - Line in source code: 25

Ho to change the system id (SID) of Enterprise Portal 7

Hello Java experts,
I have two EP7 Installations which have unfortunately the same SID, so I cannot configure single sign on (certificates must have differnt SID).
So the only solution would be to rename the SID of one portal. Can this be done ? How is it done ? I have found a sap note for EP5 describing this as a simple change in one file. But I do not knwo if this applies to EP7 also.
Any help is appreciated!
Johannes

Hi,
So the only solution would be to rename the SID of one portal.-> Yes,Rename the SID of on portal
Can this be done ? -> Yes,It can be done
How is it done ? -> Use Export/Import method.Export the database of one SID. Import the same with different SID.
Thanks and Regards,

Connect two BW systems to one source system

Hi Experts!
I would like to know if I can set up two BW systems connect to one source system. We copied and built new BW system (BW2) from existing BW system (BW1). We need to have both system connect to one source system. When I execut Restore from BW2 - RSA1 - Source System, I'm getting a following prompt:
"Connection cannot be used. The connection BB is used in the DEV400 source system as a connection BW1400 to BW. Do you want to delete this connection in source system".
If I select "Delete" then it replace exising connection between BW1 - DEV and creates new connection BW2 - DEV. If I go back to BW1 and do restore then same thing happens as BW2 connection removed.
Is there anyway we can set up two BW systems connection to one source system with restore? Connection works fine since each one can connection with no issues. Just when I do restore, it removes other connection.
Thanks.

Check if it helps:
Loading two different SAP BW system from one SAP R/3

Pro's and Con's of having Single SAP BI System to multiple BI system

Hi Gurus,
We are presently in One SAP ECC and One SAP BI landscape for two of our customers belonging to Same Parent Group.
Now we are implementing SAP for 4 more customers belonging to Same parent group in different SAP ECC system.
As part of BI solution,these 4 customers chosen the SAP BW as OLAP system, Now can some one explain the pro's and con's of having multiple SAP BI systems to one SAP BI system for all customers.
Main issue will be the Master data management from all the 6 customers where there are chances that either one or two customers might have same GL account codes or Vendor Keys or Cost centers,which may effect dataloads for their respective Master Data (Attributes, texts & hierarchies) infoobjects.
If we chose multiple SAP BI systems,is there any product with in Netweaver where we can derive KPI's from each SAP BI system separately and consolidate into one reporting Dashboard's or Scorecards. We may expect some further calculations and formulas in the KPI's from two different SAP BI systems.
Can some one help us in providing some inputs to the above scenario?
Thanks & best regards,
Sudhakar.K

Suhakar,
I am not an expert in WAD and Visual Composer, so I will withhold comment. Your organization may have requirements which push to BO regardless of your underlying BI implementation.
Yes, the display of text/key can be a small sticking point. Currently I am working with an SRM reporting scenario where we have objects such as Vendor from many different ECC systems, and the key is compounded with 0LOGSYS. This makes the key display as ZSRCSYSKEY/ZVENDORKEY. One workaround, is to put 0LOGSYS on the row of the report, and hide the attribute, as from the user's point of view, they do not care to see which source system the Vendor comes from.
There would be nothing to prevent you from spawning off separate copies of the BEx query for each source system/group of users, if they have requirements for a slightly different display of data. But the point is, you can still get a consolidated view of your key figures across all business units if it is modelled into one system, regardless of which UI is used.
I think regardless of the path you take, there will always be challenges. I always prefer to address the challenges via modeling, rather than at the UI layer.
Now however, if you already had separate BW systems in place for each regional business unit, putting a new dashboard tool to pull the data together might be a simpler solution.

Connect one SAP BW system to multiple R/3 systems

Hi All,
Has anyone done a connection of one SAP BW system to multiple SAP R/3 systems. I know it is theretically possible, but please let me know if anybody has experience of doing it. Our scenario is that take HR data from one R/3 system and other modules data from another R/3 system.
Also please let me know the steps of connecting the systems, the do's and dont's and any special config that needs to be done.
Also what are the risks?
Thanks in advance.
Regards,
Rajib

Hello,
after you connected the new source system, there are some additional steps to do. But this is common for all new source systems:
-> Set conversion of source system names in RSA1. This is necessary for Transport of Objects in BW. Go to RSA1->Tools->Conversion of Logical System Names
-> Set Assignment of Source System to Source System ID. You also find this under RSA1-> Tools. This is only important if you use a Source system ID like in IO 0SOURSYSTEM.
-> Replicate Application Component Structure of DataSources. Therefore go to DataSources. Select your Source System (If you are on BI 7.0) and go to the Header, right click you mouse and replicate Tree Metadata and then replicate DataSource.
Best regards,
Peter

Connect of 2 SAP BW systems to one SAP Enterprise Portal

Similar Messages

Maybe you are looking for