Connect of the BP in the System

Hello I want to delete old BP with the Transaktion BUPA_DEL. But they Problem is, that the BP have different connections. I have search for the connections and have find out some. Than I have delete the Connections. The Problem is, that the programm say, there are more connections with the bp but I doesn't find out more.
Have anybody some Idea, how i can find out all connections to some bp? Exist some transaction?
Thank you for your response..
Roland

Hi,
You can use INV12 - A/R Invoice - Tax Extension => Tax Id 11 for retrieving TIN No.
Note : The above table will be helpful if you prepare A/R Invoice. if you mention clearly to which document you need the TIN no, i'll help you.
Raja.S

Similar Messages

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
the TV: LG Smart tv

The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
The times when the query is sent are:
• at Startup
• at wake from sleep
• when the Mac-end of the cable is inserted
• when using the Option ( Detect Displays ) button in displays preferences

How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system prefer

how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system preferences. what else do I need to do?

First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
Matt

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

connect, then in SystemPreferences/Displays you can set the two as you want.

Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

Hiya!
This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
How to replicate the issue:
Open a file from a network share.
Edit file.
Leave computer on with file open. Computer goes to sleep or into stand-by mode.
Wait a bit
Wake up computer
CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
What I've tried:
http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
Work Around:
I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
Please let me know how I can alleviate this issue!
Thanks
-Chris

Hi,
Are those problematic documents created via previous versions of Office?
Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
Regards,
Steve Fan
TechNet Community Support

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

I have an ATV 1 which is connected to my Bose Lifestyle System. I just expanded the system and connected a second AMP for the expansion. Can I connect the ATV 1 to the aux jacks (RCA Cables) of the expansion amp? Thanks

I have an ATV 1 which is connected to my Bose Lifestyle System. I just expanded the system outdoors using a second Bose System Amp. Does anyone know if I'm able to connect my ATV 1 to the Bose expansion module in addition to keeping it connected to my main Lifestyle System using RCA cables? The new amp has RCA input jacks for auxiliary inputs. Thank you.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

When I connect my iphone to a Bluetooth system, the music doesn't play through the speakers?

When I connect my iPhone to a bluetooh system, the music doesn't play through the speakers?

Hi there JAMESPARKER1999,
I would recommend taking a look at the bluetooth troubleshooting steps found in the article below.
iOS: Troubleshooting Bluetooth connections
-Griff W.

TS3147 How connect printer to the printer driver in system preference?

I have an Epson SX600 printer, of which the software can't be found when Apple does the automated thing. However, it is part of the 1.4 gig that you can download from this site. Once unpacked, how does one actually install the driver for the printer? There's a long list. But how do I make System Prefernce actually go look in that directory, instead og going online? It states in System Preference that Apple has the software and it can be downloaded, but once I try that, it comes back with a message that the software/driver is NOT available for download.
I keep going around in circles...
So: I now have the drivers downloaded in a package of 1.4 gig. Those are placed in my Library on my "Macintosh" folder.
How do I connect the driver to the printer in System Preference?
Thanks a milion!
Aernout

OK, follow these steps:
1. Add Printer, i.e. click on +. In my examples, I chose Canon MP 250, which is installed (deleted it, and put it back)
2. Ignore the default choice, and go to Select Printer Software
3. Choose manually the driver

OK. I have connected Apple TV and chosen HDM1 input. Now what do I do? I am only getting a black screen with HDM1 and "player 1 (BD System) at the top of the TV screen. Help!

I have given my hiusband Apple TV for Christmas. We have just connected it and are just seeing a black screen with HDM1 & Player1(BD SYSTEM) at the top of the screen. Next step is to go onto Settings but I can't seem to get this to work. The screen won't respond to the Apple TV remote. I did pair it to the TV by pressing menu and Right for 6 seconds but nothing happening.
We are in a rural area with Satellite Broadband......not sure if this makes a difference.
Help please!

Didn't see you had posted twice! Deletd.

SLD connection need to made for the ECC apps system or ECC DB system

hi Friends,
We have installed the ECC 6.0 . But the ECCAPP is installed in one system and ECC Database is installed in different system.
So , From portal we are planning to run some webdynpro iViews. Which are required to connect the ECC system for getting the data. Please let me know should i prepare the SLD connection for the ECCDB system or ECCAPP system.
Regards
Regards

Hi,
You can very well create SLD system for ECCAPP and internally it will connect to the database. direct database connectivity is not required in the SLD.
Regards,
Sanjeev Mourya

SSRS Database Configuration Manager Error - Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception

I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
Let me know if anyone else has been down this path and what they have tried.

Hi BillOlive,
Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Connecting EP7.0 to iSeries backend system using the connector framework

Hello All,
We are trying to setup a backend connection in EP7.0 to an AS/400 Legacy database using the JDBC Connector framework.
We use the driver and url syntax from OSS note 773401 "Configuring Portal JDBC System connection properties"
Driver:
com.sap.portals.jdbc.db2.DB2Driver
URL: jdbc:sap:db2://<server>:<port>;DatabaseName=<database_name>
When performing a connection check using the Support Platform, we can see on the legacy system that the connection is being established but for some reason the Portal doesn't get a confirmation and runs in to an endless loop...
Does anyone have a experience with such a connection?
Can we use the standard db2 driver class as mentioned in note 773401 or do we need to create/deploy our own?
Thanks in advance
Ron

Hello All,
We are trying to setup a backend connection in EP7.0 to an AS/400 Legacy database using the JDBC Connector framework.
We use the driver and url syntax from OSS note 773401 "Configuring Portal JDBC System connection properties"
Driver:
com.sap.portals.jdbc.db2.DB2Driver
URL: jdbc:sap:db2://<server>:<port>;DatabaseName=<database_name>
When performing a connection check using the Support Platform, we can see on the legacy system that the connection is being established but for some reason the Portal doesn't get a confirmation and runs in to an endless loop...
Does anyone have a experience with such a connection?
Can we use the standard db2 driver class as mentioned in note 773401 or do we need to create/deploy our own?
Thanks in advance
Ron

Connect of the BP in the System

Similar Messages

Maybe you are looking for