Connect old flat panel

i have one of apple's original flat panels. have not used it in over a decade. i suspect it still works.
i need a panel to use with a first gen mac pro and i wonder if i can utilize this. it has a 15 pin connector. is there anything that will mate to the mac pro?
i don't need a lot of high function, just basic display.

yeah, but i have this one and the project will be more like an experiment. i don't want to spend any money if i can avoid it.
BTW, that was an interesting chart, but beyond my ken, although it looks like i have a DB-15. now that i have looked at a picture, i am not so sure.
ideally, someone will say you need X and here is where you find it.
it is an apple studio display M4551

Similar Messages

Powermac 8500 Flat Panel Monitor Options

I have a PowerMac 8500 and my Apple Multiple Scan 15 monitor is making noises, the green power button flashes, the image distorts bowing inward on the left side, or the screen doesn't light up at all.
What Apple branded flat panel monitors can be driven by my computer? The Mac 8500 has a DB 15 connector, I believe.
Would I need an adapter to connect the flat panel display, and which adapter?
I have 2 Apple Flat panel 17"? monitors that came with my G4's I could test, if I had an adapter. Is this a good idea?
Thanking you in advance.

You don't need to buy an Apple display. Any brand LCD display can be used with a Mac, provided that the computer had adequate graphics support for it, with a suitable hardware interface. If you buy a used display, be sure that it can be returned if there are any problems (like dead pixels). When you consider the initial cost of shipping and possible cost to return a bad display, I'd be reluctant to buy a used one at eBay. Many sold there are high-mileage units pulled from corporate use. If there are any retailers in your area selling used computers, I'd check with them first. At least you'd get to try it out before buying and avoid shipping expenses. Otherwise, the prices of new displays have dropped so much that buying one for your 8500 isn't money wasted, since the display can be used with any newer computer that you might purchase.
Have you ever added VRAM to your 8500? It shipped with (2) factory-installed 1 MB VRAM cards, and is maxed out at 4 MBs with an additional pair of 1 MB VRAM cards. You might want to consider installing a Mac-compatible PCI graphics card having onboard SGRAM or DDR-memory, to provide better performance for a newer display. If you go with an older graphics card, you'd be better off buying a display with the standard 4:3 aspect ratio - like your old Apple display. The optimal resolution setting for a widescreen display (16:9 aspect ratio) may not be supported by older graphics cards. Two old (but still good) graphics cards are the ATI Rage Pro (8 MBs of SGRAM) or the ATI Rage128 (16 MBs of SGRAM). Both of these cards have a VGA port, eliminating the need for an adapter. You could find these for very little at eBay - but they must be Mac-compatible versions. Cards pulled from PCs aren't compatible, unless they can be re-programmed with a Mac ROM. A newer graphics card, like the Radeon 9200, would be capable of supporting any modern display, but costs more than your 8500 is worth. That's when you should consider investing the $$ in a slightly newer, used Mac (like a G4 tower) with AGP graphics.

Flat panel scanner hpscanjet 3570c

I have an old flat panel scanner hp scanjet 3570c which has been working fine. I got a new hp laptop last month with windows 8 installed. I would like to continue using this scanner. Do you know of a driver I can download to make this work?
Jim Beck

Hello @mariannae,
Welcome to the HP forums.
I understand that you are having a problem with your Scanjet 3570c.
I would like to help.
What is the operating system on the computers?
HP Scanjet 3570c Scanner support Compatibility
I am also wondering, does it communicate with the laptop?
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Flat panel monitor recommendations

Hi All
I know I can connect a flat panel monitor to my eMac using the mini VGA port via an adapter, but can anybody recommend a decent 20inch flat panel screen as the Apple ones are tad expensive for my pocket :]
Washac

The Apple displays are LG's. The exact same screen from LG is about 300$-350$ and has a beter contrast ratio. You should try going to a computer store (other than Apple) to find the screen that I'm talking about because I dont know the model number.
Chuck
eMac Mac OS X (10.4.8) 1.42Ghz PPC G4

How to connect an old ADC flat panel to the new Mac mini?

I am thinking of getting one of these new Mac mini's for the kids in the den and I have an old 20" flat panel ADC from Apple that is still going strong. Is there an adapter that will work with this configuration?
Thanks,
West

Somewhat ungainly, but you'll need the mini-DVI-DVI adaptor (supplied with the new mini), and a DVI-ADC adaptor (http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MjE0NTg4NA)

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

Wireless connectivity with iMac G4 flat panel

Hey everybody,
We are thinking about buying an airport card for our imac G4 flat panel. We live in Ireland and are in the process of switching from a satellite dish-based Internet provider (connected via ethernet cable from the roof through the wall to the iMac) to our cable TV providers for a less expensive connection. The cable modem will be up in the TV room (the only cable CATV point that works), where we will attach a wireless router that will allow Internet access to the iMac downstairs and the iBook anywhere else in the house. Our cable providers offer 1, 2, 3 and 6 MB download speed packages. Here are the questions:
1) Is the "Apple Part No. M7600LL/E" available on macwireless.com the right one for our flat panel iMac G4 from 2003?
2) Is there any advantage to the airport card versus using a bridge? If so, which bridge is appropriate and easy to configure?
3) Which wireless router is recommendable to link with the cable modem upstairs?
4) Will the connection be strong enough between the router and the airport card or bridge to provide full speed and, possibly, VoIP (saving dough to one day be able to upgrade to a 20-inch iMac! LOL)? The distance is about 8 meters.
5) If we later upgrade to a new iMac and give our son the flat panel will everything still plug and play?
6) Which download speed package do we need to make everything run smoothly?
7) Is it really feasible for a "layperson" to install the card themselves?
Thanks again for your help!

Forgot to say in my other post. There's no need to buy at that price ($199) and pay for shipping - there are plenty of UK/IE options for buying.
There are also alternatives like Ethernet over Mains electricity (14 or 85Mbps) which may be a better option than original Airport.
mrtotes

Can Powerbook connect to sony LCD flat panel fo simultaneous display?

I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display.
While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv connectivity because of video driver issues in either the Powerbook or the tv. I could not get both screens to display simultaneously (without parts being cut off at the bottom or sides). Apple would not support my question as the "connected device" (the tv) was not an apple product.
Before I spend the money on a new TV, I would like to know if anyone has had success with "plug-and-play" connectivity to a 42" or 50" plasma or LCD flat panel, in particular a Sony product.
Thanks in advance for sharing.

There is no reliable way to know if a random TV will or will not suffer from the "overscan" problem where the top, bottom and sides are cut off. Many TVs do this and there is no way to get around it.
What I would do is take your PowerBook to the retailer where you are buying the TV and ask them if you can hook up the PB to the floor model. That is the only way to know for sure if it works to your satisfaction. Either that or, if you have a specific TV and know its model number, you might be able to ask your question again and get an answer from someone that already owns the TV. The AVSforum.com are a good place to check for various TV models.

Can Powerbook connect to Sony LCD flat panel properly for simul. display?

I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display.
While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv connectivity because of video driver issues in either the Powerbook or the tv. I could not get both screens to display simultaneously (without parts being cut off at the bottom or sides). Apple would not support my question as the "connected device" (the tv) was not an apple product.
Before I spend the money on a new TV, I would like to know if anyone has had success with "plug-and-play" connectivity to a 42" or 50" plasma or LCD flat panel, in particular a Sony product.
Thanks in advance for sharing.

YOu should probalby post your question in the appropriate PowerBook "Displays" discussions:
http://discussions.apple.com/category.jspa?categoryID=120

Connect MBA to LCD Flat Panel

I've tried to connect my MBA to my LG 42" LCD Flat Panel by using the RGB connector. When doing this, the MBA screen changes its resolution, but i can't see nothing on the LCD. Do I need to install a driver?

You are going to need to purchase an adapter from Apple to interface to the Mini DVI connector. Then get a cable like this from monoprice:
http://tinyurl.com/ekpm2

HT1752 iMac flat panel 2003 shows airport but does not connect

Hi,iMac flat panel 2003 shows airport but does not connect

No problems.
Let's double-check your iMac's Internet Sharing configuration:
To setup for Internet Sharing (Wired to Wireless):
Setup the Network
Cable Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > MacBook
Enable Software Firewall (iMac)
System Preferences > Security > Firewall
o Block all incoming connections (enabled)
Enable Internet Sharing (iMac)
System Preferences > Sharing
o Select "Internet Sharing" from the options in the left column
o Share your connection from: Built-in Ethernet
o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
AirPort Options... (iMac)
o Network Name: <anything you want>
o Channel: Automatic
o Enable encryption <do NOT enable at this time>
o Click OK
o Select "Internet Sharing" again
o Click "Start" to start Internet Sharing
o Click Start
Please verify these settings, and try accessing the Internet from the MacBook again. For this exercise, I suggest co-locating the MacBook with the iMac.

Migrating from old G4 15-inch Flat Panel to new iMac 24-inch 2.16GHz

Just purchased a refurbed 24" iMac with 2.16GHz core duo from Apple. Currently work on 15-inch flat panel 800MHz PowerPC G4 iMac using 10.2.8. Main applications are Photoshop v.7.0.1, Final Draft 6, and Office v.10.1.8. All important data is archived on three external OWC Mercury firewire drives. What is the most efficient, least problematic way to migrate? Or am I better off avoiding migration, installing latest Intel-friendly Photoshop, Office, and Final Draft software, and dragging select image files, and documents from external drives to new desktop? Also, how can I easily transfer my old iTunes/iPhoto/iMovie libraries over to new iMac from external drives without doing a migration? Thanks!
iMac G4 Flat Panel 15" Mac OS X (10.2.x)

May I recommend familiarizing yourself with Kappy's migrating advice;
A Basic Guide for Migrating to Intel-Macs
PS - the 24" iMac Intel is a Core 2 Duo.

Could I connect my PS3 to my Dell Flat-panel LED Monitor (s2309w)?

So I own a dell 23 widescreen flat-panel led monitor (s2309w), is there some type of chord that I could buy to connect it to my PS3? This is what I have:
http://accessories.dell.com/sna/products/displays/productdetail.aspx?c=ca&l=en&s=corp&sku=320-7339

Simple answer is, you're not gonna be able to get audio with only your PS3, and that monitor without a receiver of some sort, or a TV with audio input.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Mixing RAM Speeds In iMac G4 1GHz 17" Flat-Panel?

I'm just checking here.
I have an iMac G4 1GHz 17" Flat-Panel, Model M8935LL/A (USB 1.1 version) that currently has the standard 256MB PC2100 (266 MHz) RAM module installed in the factory slot, and a 512MB PC2700 (333 MHz) RAM module installed in the bottom (user-accessible) slot. I bought the machine direct from Apple, so despite the "official" spec (which calls for PC2100 RAM in both slots), it's obvious that Apple knows PC2700 RAM will work in that machine. My understanding is that the faster PC2700 RAM simply downclocks to accommodate the lower 266 MHz bus speed of the M8935LL/A. As I understand the DDR SDRAM spec, any DDR SDRAM (PC1600 through PC3200) module will simply overclock or underclock to accommodate the host bus speed...but feel free to correct me if I'm mistaken on that point.
I'm fixing to upgrade the hard drive to a larger capacity model. I've done it before, so I know it's no picnic. Since I have to go past the factory RAM slot anyway to change the hard drive, I figure I might as well upgrade the internal RAM to the full 1GB limit. (Yes...I know Apple says you can't exceed 512MB in either slot, so please—no remonstrances about sticking to Apple's spec. The spec is wrong.)
Obviously, it's possible to mix the two RAM speeds between the two slots, since Apple shipped the computer that way. Here are my questions:
• Is there any downside to going the other way when I upgrade the RAM—that is, putting a 1GB PC2700 (184-pin) module in the factory slot, and a 1GB PC2100 (200-pin) module in the user slot? The reason I ask is because my preferred supplier (OWC) can't supply me with both modules in the same speed.
• Is there any performance advantage in both modules being the same speed—that is, both PC2100 or both PC2700? If not, I'll just buy the one of each speed that OWC has available.
Thanks!

jjw wrote:
So, you know have 2Gb available in your flat screen imac?
Yes indeed—2GB confirmed as available by Apple System Profiler. Both modules are PC2700. Everything is working fine.
I guess I can understand why Apple discourages users from replacing the 184-pin "factory slot" module. There's not a whole lot of slack in the motherboard connector cables, so it's best to disconnect them in order to get the bottom section to lie flat on the workbench. I suppose some folks might be hesitant about disconnecting things, but it's really quite simple, and involves only three connectors. After having changed the hard drive a few years ago, replacing the RAM was a piece of cake by comparison.
A word of caution to anyone who's going to attempt it, though. There are TWO heat sink interfaces between the bottom section (where the motherboard is mounted) and the top dome. Those heat sink surfaces are coated with thermal paste at the factory, but the compound dries out over time, becoming a rubbery membrane between the heat sink surfaces. Once you separate the top and bottom sections, the membrane rips apart, and the firm connection between the heat sink surfaces is permanently gone. It's a bad idea to simply put them back together after you change the RAM module; you won't get a good thermal connection.
The solution is to scrape all of the old rubbery compound off all four surfaces (two on the bottom and two on the top section). I did it with a piece of PVC, but you can use anything with a sharp edge that won't scratch the metal surface—even your fingernails will work, unless the old compound has dried out to the point where it's hard. After you scrape the old gunk off, apply new thermal paste to all four surfaces.
The other maintenance item you can perform while you're in there is cleaning out all the dust, which accumulates in vast quantities and interferes with cooling. I vacuumed it out with a plastic crevice tool, being careful NOT to touch any of the components with the tool. Vacuuming can build up a static charge on the tool, especially in dry environments, and high static voltages aren't friendly to microprocessors. I used a securely grounded anti-static wrist strap throughout the entire operation, and even wrapped it around the vacuum tool.
Good luck!

Cant get Apple TV to work properly with older flat panel TV.

I have an older flat panel, a 42" philips 42pf9630a. This one:
http://www.retrevo.com/support/Phili.../278bh337/t/2/
I plugged my brand new Apple TV into the HDMI and switched input on the TV. I can see the Apple TV main menu but it blips in and out, toggling between the main menu and snow. Obviously there's some sort of communication issue between the Apple TV and my Philips. I have successfully used this apple TV on several other TV's in the past couple of months.
Is it because my TV is too old? Any suggestions on what I can do to fix this??
Thanks for your help!

Go in to the network and sharing center (in control panel), with the pc connected by wire. Right inder the little "map" of her network, it will list the available networks (probably only one listed), click customize and set it to private, you can also name it if you want so its more easily identified.
Also, make sure file sharing and network discovery are "on".
Message Edited by Frunple on 03-17-200705:50 AM

Connect old flat panel

Similar Messages

Maybe you are looking for