Connect one BO instance with several BW

Hi experts,
I'm new to BO and I have a very newbi arquitectural question to ask, and I thought to start with the experts.
Do you advise having one BO instance connected to several BW sources?
The plan is to have one BO connected to a sandbox, dev and qas BW systems.
However I don't know if it's even possible, and if it is, then the configuration work to have such a landscape is probably more than having several BO instances.
On BO side only WebI will be used.
Any suggestions or comments?
Best regards,
João Pinto

Hi guys,
thanks for your answers.
I think my main doubt is now partially answered (technically it's possible to connect BO to several BW sources), however I would like a best practice approach regarding the effort involved since I've never been in a BO project like this.
The Prod will be isolated for sure and QAS probably too. No need to worry about the full landscape.
My main doubt is the effort required to connect the same BO to 2 BW backends (dev and sandbox) versus the effort to create a sandbox BO and connect it to the BW sandbox. The effort I'm measuring only technical (installation and connections) but other factors would also be in mind.
Some details:
-Dev and sanbox BW already exist.
-Dev BO is almost completed (installation, not the connection)
On one hand, for a new BO sandbox we will require additional hardware and several technical man days (not much but takes time to provision it). Using the same BO we have a lower number of technical mandays and no need for additional hardware.
For this argument I think using the same BO is the best approach.
On the other hand In the future the sandbox BO and sandbox BW (used for prototype) will disapear, so, if we have only 1 BO instance the effort to delete the prototype environment is also determinant because of the risk of leaving garbage information on the dev system. Deleting this environment has also the cost in mandays.
For this argument I think using separate BO is the best approach. Is it a clean process to delete the protorype environment from a mixed BO instance?
Thanks for your help,
João Pinto

Similar Messages

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Is there a way of making one portal instance serve several domain names ?

We have one Portal instance (3.0.8) that contains one Intranet, one Extranet and 5 Internet sites (Page hierarchies). After redirecting calls to the diffrent domains (sites) to their corresponding Portal page in the webserver, the URL reveals that we are actually running all these sites on the same Portal domain. I know that we can change the Portal domain by running the ssodatan script, but is it possible to have one portal instance work for several Portal domains ? I realise that this is probably far fetched, but I just had to ask... This will not create a big problem for us, it's mostly an esthetical issue.
Morten

Yes you can do this.
Your machine must have multiple IPs with a different name associated with each IP.
Look at the ssodatax scripts. This script allows you to make additional entries into the login server repository to register new names with the login server.
Add each name using the ssodatax script and you will be fine.
Rich

Several PR clubbed to one PO but with several Item lines?

Hello SAP gurus
Is it possible to merge several Purchase requisitions in APO into one Purchase Order but with several item lines in ECC?
If I have 50 PR in APO and CIF them to ECC, I want them to show as one PO with 50 item lines in ECC.
And I also need to know if it's possible to transfer PR from APO to ECC and set it to "blocked" before it is "approved" in ECC.
Like an approval workflow would work in MRP.
I would jump for joy for some answers.
Christina

Hi
It is possible. Please try the below steps.
1) Create the PO manually with the total qty of both PR.
2) Go to the delivery schedule tab and there is button to split the delivery scedule, select and split with the required qty
3) Assign the relevant PR to the respective schedule line.
Also you can use the option suggested in the previous message.
Now the PO will have 1 line item but 2 schedule lines
Hope it helps.
Thanks / Karthik

Can we link one application instance with multiple databases ?

We have R12.1.1 and db is 11.1.0.7 on redhat 5.3 ( 64 bit).
Can we link one application instance ( apps / , inst / ) with multiple database ( db / ),
is this possible ?
if yes how ?

>
Can we link one application instance ( apps / , inst / ) with multiple database ( db / ),
is this possible ?
No. You cant link application tier with more than one database.
Similar query already answered by Hussein in detail in the forum :Re: Multiple instances, single Apps tier Please check that for more details
-Rk

I will connect one Philips NP3700 with my Itunes music...

What can I do to connect mit Itunes music with one Philips NP3700 ?

I had previously syncd the ipad and the songs on it, then loaded songs from an old ipod into the itunes account (using irip) and now the ipad songs that were in the itunes account are gone. Can I change the auto sync settings before reconnecting the ipad again as to not lose the songs from my old ipod.

Problem connecting to OIM instance with the Design Console

Hello,
I've got questions about how to use the design console to connect to an OIM instance. I'm not the one who has set up the instance and the one who did cannot help me much. He did give me root access on the machine though.
So first, I'm wondering how do I figure out which port I should connect to. All the doc I can find says that default port is 14000, but I don't understand what it's referring to. I can access to the Web Administration page for Fusion Middleware Control by going to <server_ip>:7001/em. Should I use port 7001? I can figure out that 14000 might not be the correct port because "netstat" does not show anything listening on that port.
My second question is related to the credentials I should use to login to the console. According to the doc and tutorials I found, the user should be xelsysadm. However the person who has set up the instance does not remember having explicitly set a password for this user. Is it possible to log in to the console using the weblogic admin user?
I've tried a couple of things, but nothing has worked so far. I always get an error of some some sort. I always get an Invalid Login, except when I log in with the weblogic user and set the following properties in xlconfig.xml:
ApplicationURL= http://<server_ip>:7001/xlWebApp/loginWorkflowRenderer.do
java.naming.provider.url= t3://<server_ip>:7001/oim
With these config, I get this exception:
javax.naming.NameNotFoundException: While trying to lookup 'ejb.stateful.tcDataBase#com.thortech.xl.ejb.interfaces.tcDataBaseRemote' didn't find subcontext 'stateful'. Resolved 'ejb'
So that's pretty much where I'm at. I can't find any information that can help me, so any hint would be appreciated.
Thanks for your time,
jtellier

try to login in weblogic console the port will be 7001. if you are able to do this then
goto->service->security->realim->select user and groups (try to find the correct path)
create user and then assign administrator groups to this user
login with this user/password into OIM
But for design console you don't need any url. if it is configured. go to <IDM_HOME>/designconsole/ and run xlclient.sh
--nayan

How to Print one PDF document (with several documents inside) at once?

When I select several emails and convert them into one single PDF file, I would like to know how can I print (hardcopy print) all emails at once, instead of having to select each one at a time to prit it.
I have ADOBE Acrobat X Pro V10.
Can anyone help me with this? It would save a lot of time.
Thank you

I am using XI and it has a better print dialog for portfolios, but I think this Adobe blog link explains what you need for X:
http://blogs.adobe.com/acrolaw/2011/11/batch-printing-an-email-portfolio/
Not sure why the link I posted above looks like is has spaces, but there are no spaces in the link.
Message was edited by: Anna Nmty

Connecting two Entity Instances with global Entity and amongst themselves

Hi,
Is there a way of storing in the relationship between two instances of the same entity?.
For instance, there is an entity called : the household member(hhm)
and a global entity called the central character(cc).
Let the hhm be: A, B, C
and the cc: D
Is there a way of asking for and storing the relationships that A shares with B and C, and that shared between B and C?. And the one shared by al of them with D?
Please let me know if the case is not clear and any further clarity is needed.

Hi Davin,
Appreciate the prompt reply.
By "the relationships that A shares with B and C", I meant to find a way of capturing the relationship that different members of a household may share.
Lets assume that the form is being filled by one of the household members, now I am looking for a way to capture the relationship that the form-filler shares with other household members+ the relationship that these household members share with each other.
I hope i have cleared your doubt to a certain extent. Please let me know if you have any other misgivings.
Lokesh

1 SQL instances with several archive Databases using all AWE RAM memory of server

Hello,
I just migrated my accounting system to a new SQL Server deployment of the software.
We just purchased the expensive SQL Server enterprise to accomodate.
I have some replicated databases to of lower priority that I put on the same instance that we occasionally query. I also imported a 70GB old archive DB that we on very rare occasions. We are not concerned about performance on these databases
as we are about the accounting DB on the same instance.
The MAX memory was set to unlimited on that instance. As soon as I put in this monster 70GB archived databases the AWE memory usage used up my full 30GB of RAM.
Is there a way to set the memory usage so the archive databases do not get loaded into the AWE but still the critical accounting system DB on the same instance is taken care of?
Or do I have to shell out another $3-6k for a separate instance? SQL Server Express has a 4GB limitation and one of the backup DB we don't really care about is 20GB replicated from Azure.

Hi,
>>70GB archived databases the AWE memory usage used up my full 30GB of RAM.
How did you checked that Archived database is using 30 G did you used sys.dm_os_buffer_descriptor.Do SQL server have locked pages in memory
SQL Server bring pages in memory if it is requested ,if you access Archived database heavily its bound to take memory but if yous top accessing it and access your other database SQL server will flush out pages of archive IF REQUIRED.
SQL server manages memory dynamically so I guess you do not need to worry
>>s there a way to set the memory usage so the archive databases do not get loaded into the AWE but still the critical accounting system DB on the same instance is taken care of?
No ,there is no way buffer pool is shared region
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Is it better to have one Event Structure with more (10 or 15) cases or several with fewer?

I have several buttons and events on the GUI of my app to monitor. Would it be better to use one Event Structure with several cases (10 or 15) or have a couple and split the cases evenly? None of the cases have much processing to handle, so there is not a time lag issue. I am just worried about overloading the structure. One of the tech support guys mentioned that the event structures are not that hard to get confused.
Has anyone had any problems with Event Structures?

I use event structures very often in my code. I use them just to handle the interface and to run small code. I have had event structures that handled over 50 user interface events and never had a problem. In my personal opinion If there was any code to run I would let the event structure handle the the user interface event that fired a que in another while loop that handled the code.You can find examples on this, if not I will send you one. It is just good programming practice for beginners because it will alow you to build more robust VI's in the future.
Hope this helps
Joe
Joe.
"NOTHING IS EVER EASY"

Create a new user for oracle 10G ASM instance with sysdba system privilege

Hi,
In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to connnect to ASM instance.
I'm getting the error message "ORA-01109: database not open",When I tried to create a new user using the below the steps in oracle 10g ASM instance
1. Login using "sqlplus / as sysdba"
2. Create user <username> identified by <password>;
But in oracle 11g ASM instance, I'm able to create new user by connecting the ASM instance with SYSASM role without issues.
Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
Thanks in advance .

Hi,
Recreate the password file for the ASM instance as follows:
Unix:
orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
Windows:
orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
SQL> create user ASMDBA identified by test01;
User created.
SQL> grant SYSASM, SYSOPER to ASMDBA;
Grant succeeded.
SQL> select * from v$pwfile_users;
USERNAME SYSDBA SYSOPE SYSASM
SYS TRUE TRUE TRUE
ASMDBA FALSE TRUE TRUE
Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
Thank you

Connecting One process Server to Multiple SAP Systems

Hi Experts,
We have a licensed version of the SAP CPS with the Process server limit parameter set to 4, which means we are limited to 4 process server as per my understanding. But when we create a SAP system the process server and the respective Queue is automatically created. SO that means we can create a max number of 4 SAP systems with 4 process servers!!
Or is there a way we can connect one process server with multiple SAP systems ?
Thanks,
Eric.

Yes - Process server limit parameter set to 4 means your CPS environment can start jobs in 4 SAP systems only.
Maybe "SAP Business Automation Enabler (BAE) Connectors" could be useful to you in your situation.
- Check the CPS admin guide for more information on BAE connector.
Regards,
David

One Service Interface with SOAP (sync/async)?

Hi experts,
Iu2019m configuring the following scenario SOAP -> PI 7.1 -> ABAP proxies.
My Service Interface has four different operations, 1 is sync and 3 are async. I want to use SOAP adapter as I donu2019t need to use WS-RM and WS-A of WS adapter. So, I have two SOAP communication channels (sync/async). But, when I try to create the sender agreements, PI only let me to create one, as the second has the same name Iu2019m not able to do it, it tells me that the object already exists.
How can I create this scenario where an outbound service interface has several operations with different Quality of Service (sync/async)?
Anyone has faced this situation before?
Thanks in advance,
Ricardo.

When you have one interface with several operations, you need only to have one sender agreement with that interface.
The mapping is based on operation, not on interface. You can have different receiver interfaces, or one receiver interface with several operations.
The QoS can be added in the target URL, when you have the chance to apply different URLs based on the operation in the client.
Regards
Stefan

Cannot connect to RAC-Instance as another user

Hi,
I have two unix user, called oracle and bb, belongs to the group osdba in a RAC environment.
As user "oracle" I can connect to the instance with sqlplus "/ as sysdba".
As user "bb" I get the message: "connected to an idle instance."
Does anyone has any idea why this can happen ?
In both cases I set ORACLE_SID and LD_LIBRARY_PATH and PATH identical.
What's wrong ?
PS: In a single database environment this will work.
thanks for any help,
Rainer

If you have to connect to oracle RAC (Real Application Cluster) using JDBC with thin driver, the classic url:
jdbc:oracle:thin:@<HOST>:1521:<SID>
doesn�t work and you get the error ORA � 12505.
Instead, you must use this url:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)
(ADDRESS=(PROTOCOL=TCP)(HOST=host1) (PORT=1521))
(ADDRESS=(PROTOCOL=TCP)(HOST=host2) (PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=service)))
Check the tsnames.ora for the correct values of SERVICE_NAME and host.

Connect one BO instance with several BW

Similar Messages

Maybe you are looking for