Connect Operation Failed

Good morning. I had created a form designed via LiveCycle, it was connected to a database. The location of our database was recently moved from one drive to another and while I re-pointed the form to this location and tested my connection with success, I receive the "Connection Operation Failed" pop-up error when trying to view the form via the tab: pdf preview. I can click through the error and it previews my form, but how can I eliminate the message even popping up in the first place?
Please help, thanks.
CG

Have you checked that all connections have been repointed?
It is acting like there might be one still pointed to the old location.
Open the XML tab, and search for "<connectString>".
Repeat finds will step you past all the connections in the form.
Good Luck

Similar Messages

Operation failed when loading ovi 2.1.1.1

every time i start up ovi 2.1.1.1 i get this error with or without the phone connected :
operation failed
unable to read tracks
any idea's?

hey pal run the nokia ovi suite as administrator... then u wont get this error.
Just right click the nokia ovi suite application --> Properties --> compatibility --> Check the run as administrator.
Phantomx1989

Memeber server in a domain connected with external trust. The agent operation failed, DPM could not communicate with the DPM agent. Error ID 270

I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int, is in.
I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmserver.domainA.int
I successfully ran attach-productionserver.ps1 in DPM Management Shell.
When I click refresh in DPM 2010 Administrator Console/Management/Agents I get error id: 270
The agent operation failed on myprotectedserver.domainB.int because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
If myprotectedserver.domainB.int is a workgroup server, the password for the DPM user account could have been changed or may have expired.
I can ping myprotectedserver.domainB.int from mydpmserver.domainA.int
DPM 2010 backup of the domain_controller.domainB.int works fine.
The application log on myprotectedserver.domainB.int does not show any DPMRA related event logged.
The firewall on myprotectedserver is off.
Computers in domainA and domainB use their own networks connected through a router.
from mydpmserver
net view \\myprotectedserver.domainB.int /all - successfull
sc \\myprotectedserver.domainB.int query OpenSCManager FAILED 5, Access is denied
wmic /node:myprotectedserver.domainB.int OS list brief Error 0x80070005, Access is denied
from domaincontroller.domainB.int:
sc \\myprotectedserver.domainB.int query successfull
wmic /node:myprotectedserver.domainB.int OS list successfull
Any suggestions on how can I fix this?

Hi
I know this is old but are you still having a problem?

Phone 6822 connected but operations fail

My Nokia PC Suite browser shows my phone (6822) is connected but when I try to transfer files I get an "operation failed" message. What can I do to correct this?

Hi @rstann,
Welcome to the HP Forums!
I see that you are having trouble setting up the fax with your HP Officejet 6830 printer. I am happy to help!
Please take a look through this guide, Sending and Receiving Faxes with the HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printer S.... In the frequently asked questions portion, under I can't send or receive faxes. What should I do? It states:
Step one: Check the physical connections
Disconnect the telephone cord from the printer and phone jack, and then examine the connector on the end of the cord. Make sure that the cord has only two wires. If you see four wires, replace the cord with one containing only two wires.
Figure : Example of a two-wire connector
Figure : Example of a four-wire connector
Hope this clears things up for you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

The export operation failed to create an image file

I've been experiencing bizarre behavior when attempting to export images to my Usb-connected card reader. After reading some threads on this form, I was convinced that my reader was defective. Same problem on a brand-new reader.
The specific behavior was as follows: I attempted to export roughly 150 custom-named 500 KB image files to the memory card. The last 15 or so failed to transfer and I got the message, "the export operation failed to create an image file for the versions identified below."
Trashing VP list didn't help. What did was changing the custom name. There was nothing particularly unusual about the original custom name and the new one was virtually identical. After changing the name, the export worked without a hitch.
Has anyone experienced similar behavior? Any ideas what's going on?

problem was that the NEW card reader was faulty as well. My luck!

RFC Error: A remote host refused an attempted connect operation

Hi I received strange kind of error..
Have anyone of you seen something like this before?
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (**) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=logon*.*.com GROUP=SPACE R3NAME=2 MSSERV=sapms2 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '.*..*:sapms*8' not reached TIME Sat Feb 11 20:37:58 201 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: *.*..*:*** SYSTEM CALL connect ERRNO 79 ERRNO TEXT A remote host refused an attempted connect operation. COUNTER 8</SAP:AdditionalText>
<SAP:Stack />

Hi,
MSHOST=logon**.*.com is name server, but it can be recognized as in message is also part "on local host with Unicode ERROR partner '.*..**:" where *.*... is IP address..
That problem occurred after some patches were implemented.
@2.) I can't change it to ABAP proxy
M.

Moving big files(600MB) with FTP Adapter error The IO operation failed

I everybody, I have the next trouble:
I need to move big files from one server to another remote server through ftp protocol. All the configuration is correct and I am able to move little files
with no problem, but when I move big files the server shows the next error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'readEBS'
failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][NONE]" IO operation for "/tmp/TestLogSOA/DetalleCostos3333333.dvd"
failed. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_NOTA start() failed on
resource 'SOADataSource_ohsdomain': XAER_NOTA : The XID is not valid oracle.jdbc.xa.OracleXAException at
oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1532) at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:321) at
weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:51) at weblogic.jdbc.jta.DataSource.start(DataSource.java:722) at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1228) at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161) at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:297) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434) at
weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1592) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1496) at
weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396) at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.getConnection(XMLDocumentManagerImpl.java:623) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:208) at
sun.reflect.GeneratedMethodAccessor1534.invoke(Unknown Source) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at
org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at
org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at
org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at
org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy285.insertDocument(Unknown Source) at
oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:244) at
oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:99) at
oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:773) at
oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1106) at
oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:502)
at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:356) at
oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:171) at
oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139) at
oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179) at
Thanks!!!

Hi idavistro,
You can try setting the XA Transaction Timeout for SOADataSource.
1. Log in to the WebLogic Admin Console.
2. Select in the left tree: Services-> Datasources-> SOADataSource->Transaction.
2. Select Set XA Transaction Timeout.
3. Set XA Transaction Timeout to 0.
4. Restart the server and check if the error still appears.
Regards,
Neeraj Sehgal

10G dbconsole: A remote host refused an attempted connect operation.

We have 10.2 running on AIX. I previously had dbconole running fine, however, something was changed and now when I log into dbconsole I get the error "IOException in sending Request :: A remote host refused an attempted connect operation.". I can still administer database stuff (user, tablespaces) but any operation that tries to access the host fails. For instance I can't schedule a job nor change the operating system credentials. What's really wierd is that on the home page it shows database down, listener down, and agent failed. Obviously, the database and the listener are not down or I wouldn't even be able to get in.
Help appreciated.
Kirk

emagent.trc
07-03-26 15:50:43 Thread-1026 ERROR fetchlets.oslinetok: Process stderr = /u01/app/oracle/product/10.2.0/db_1/bin/emctl[333]: /tmp/sh401660.13: 0403-005 Cannot create the specified file.
2007-03-26 15:50:43 Thread-1026 ERROR engine: [oracle_emd,fcotaix2.mccnet.mccneb.edu:3938,EMDUploadStats] : nmeegd_GetMetricData failed : em_error=failed to get upload statistics:
/u01/app/oracle/product/10.2.0/db_1/bin/emctl[333]: /tmp/sh401660.13: 0403-005 Cannot create the specified file.
2007-03-26 15:50:52 Thread-1280 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2007-03-26 15:50:56 Thread-1027 ERROR http: 11: snmehl_read: error on read: The network is not currently available. (error = 69)
2007-03-26 15:50:56 Thread-1027 ERROR upload: FxferSend: HTTP Error=-1 reading request response from: http://fcotaix2.mccnet.mccneb.edu:1158/em/upload/
2007-03-26 15:50:56 Thread-1027 ERROR upload: Failed to upload file B0006595.xml, ret = -2
2007-03-26 15:50:56 Thread-1027 ERROR http: snmehl_connect: Failed to get address for fcotaix2.mccnet.mccneb.edu: Authoritive Answer Host not found (error = 1)
2007-03-26 15:50:56 Thread-1027 ERROR upload: FxferSend: Cannot connect to: http://fcotaix2.mccnet.mccneb.edu:1158/em/upload/. retStatus=-32
2007-03-26 15:50:56 Thread-1027 ERROR upload: Failed to upload file B0006595.xml, ret = -2
2007-03-26 15:50:56 Thread-1027 ERROR http: snmehl_connect: Failed to get address for fcotaix2.mccnet.mccneb.edu: Authoritive Answer Host not found (error = 1)
2007-03-26 15:50:56 Thread-1027 ERROR upload: FxferSend: Cannot connect to: http://fcotaix2.mccnet.mccneb.edu:1158/em/upload/. retStatus=-32
2007-03-26 15:50:56 Thread-1027 ERROR upload: Failed to upload file B0006595.xml, ret = -2
2007-03-26 15:50:56 Thread-1027 ERROR upload: 3 Failures in a row for B0006595.xml, we give up
2007-03-26 15:50:56 Thread-1027 ERROR upload: Error in uploadXMLFiles. Trying again in 86.00 seconds.

The operation failed as no adapter is in the state permissible for this operation network issue

Hi
I run some windows (2008 r2) servers on the cloud. A couple of servers are reporting a red x in the system tray where the network icon is, and my network adapter has disappeared.Using ipconfig /renew I get:
The operation failed as no adapter is in the state permissible for this operation"
There isn't really more info I can provide. All servers on static private IPs.
Thanks

Hi GSS1,
Thanks for update.
So can we still verify and get information of this missing NIC form device management console on server ? can we still get the NIC by command “netsh interface show interface” ?
what was the latest modification we performed before this issue occurred ? Is there any error or warring event shown in the event viewer ?
Have we installed Hyper-V on this server host ?
We have a KB article that described a similar issue and some methods to verify and resolve this issue on Windows 2003 and XP platform and we may try it and see if that will help:
How to troubleshoot missing network connections icons in Windows Server 2003 and in Windows XP
http://support.microsoft.com/kb/825826/
Regards,
Tiger Li
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Tiger Li
TechNet Community Support

Connection AFW failed, due to: RecoverableException : SOAP Adapter.

Hi All,
We are using XI3.0 Sp14 . the message flow is
IDOC> XI> SOAP ADPATER (receiver side)--> External system.
Here everything is fine, we are using https URL of the extrnal system to send the cXML file on there side. The external URL is fine and working.
When we send the idoc from R/3 to XI. then it gives very common message. I dont know what is wrong with this message. .
Please check this , what I got in Audit log:
2007-04-16 10:14:03 Error Exception caught by adapter framework: null
2007-04-16 10:14:03 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2007-04-16 10:14:03 Success The asynchronous message was successfully scheduled to be delivered at Mon Apr 16 10:19:03 EDT 2007.
2007-04-16 10:14:03 Success The message status set to WAIT.
I don't know why I am getting this error message. Please help me to resolve this. Thanks
regards
Ram Singhal

Hi,
For SOAP receiver adapter, you have the WSDL file from the provider of the webservice, either from a URL link or physically receiving the file.
The WSDL file contains the attribute "location" from the element "address", and the attribute "soapAction" from the element "operation". These 2 values must be entered exactly as is into the SOAP comm chan config.
Also, insure the proxy information are also entered correctly, include the userid/password if required. The webservice provider may also require authentication, so make sure it is also entered.
If possible, execute the webservice using a generic SOAP client tool to test. Use the exact configuration entries as those you used in XI. There are many free tools from the internet.
Regards,
Bill

[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012

Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel

Hello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network...

Log connection attempts and source IP address for connections that fail/timeout on RADIUS

How can I log the connection attempts and source IP address for connections that fail RADIUS authentication? I'm using RD Gateway on 2012 R2 in conjunction with Azure Multi-Factor Authentication Server on another 2012 R2 server. When a user fails
multifactor authentication or the authentication times out, all I get is Security event 6273 on the RD Gateway that the radius server did not process the request, and only the radius server's IP is logged. There's nothing logged in TerminalServices-Gateway\Operational
because the TS Gateway hasn't yet processed the connection attempt (all auditing options for RD Gateway are enabled). The MFA/Radius Server is only logging the connection from the TSGateway - it doesn't know the original client's IP address.
I'm looking for the equivalent of an IIS log - somewhere the RD Gateway should log the initial HTTPS connection attempt and the source IP address of the client. I need to be able to track down potentially fraudulent login attempts.

Hi,
Thank you for your posting in Windows Server Forum.
This error might be caused by one of the following conditions:
• The user does not have valid credentials
• The connection method is not allowed by network policy
• The network access server is under attack
• NPS does not have access to the user account database on the domain controller
• NPS log files or the SQL Server database are not available
To perform these procedures, you must be a member of Domain Admins.
Please check for more information:
Event ID 6273 — NPS Authentication Status
http://technet.microsoft.com/en-us/library/cc735399(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Connect Operation Failed

Similar Messages

Maybe you are looking for