Connect pc and mobil though com port

I want to connect pc and mobil.But i don't have set command commapi to connect them.Can you give that ?
Thanks a lot.

You mean the jar file?

Similar Messages

  • Can time capsule be connected wirelessly and still use ethernet ports for other devices?

    can time capsule be connected wirelessly and still use ethernet ports for other devices? we have it connected wirelessly but devices connected to the ethernet ports are not working.

    Not as an additional router.. the TC will be plugged into the main router via ethernet (or ethernet equivalent)..
    Then the TC is setup in bridge mode. It will simply act as a Switch and HDD.
    The wireless can be setup in a number of ways.
    From your convenience point of view use it in roaming network mode..
    you simply give the TC the same Wireless Name as the existing routers SSID.
    Same security setting and password. WPA2 Personal = WPA2 AES which is the best.
    But they both use different wireless channels.. normally if you leave the TC on auto it will work fine, but I prefer to control the network.. so set the main router to say 1 and the TC to 11.
    You can also use a completely different wireless name etc.. that is up to you. It is still a single flat network and the only thing that is important is only having one router.

  • HI, want to connect XI and Mobile

    hi,
    Experts,
    I am new to mobile world.
    can you please tell me how to connect Mobile and XI.
    I want to know the flow between Mobile and XI, how data will go?
    I have heard about mobile gateway, what is it?
    What changes I have to make in XI server to support Mobile connectivity?
    Thanks.
    Waiting for replies..

    Hi divyesh vasani,
    Welcome to Mobile Infrastructure... you can easily get along with MI by just following some of the links below:
      - what is mobile infrastructure?
      -Mobile--XI--R/3
    2. R/3 Gateway for mobile
    Document for Data Flow between Mobile and XI is a very good Document for understanding <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d">Integrating Mobile Device With SAP XI</a>
    PS: <b><i>Do Reward points if this helps you...</i></b>
    Cheers,
    kumarR

  • Connecting Rv180w and D-Link 5-Port 10/100/1000 Switch DGS-1005G

    This simple exercise has become a pain. I have a D-Link 5-Port 10/100/1000 Switch DGS-1005G connected to an old (10 years old) linksys 4 port router and it works fine. When I try to connect the switch to my new RV180W it appears dead...no connectivity lights at all. I cannot see an uplink port on the RV180w.....I have tried crossover cable still no joy. Am I missing something?

    Hi Tom,
    Yes i am pretty sure, i have called 3S vision and confirmed it, also i conducted 3 test in 3 different switches last week and the camera worked just like that " Plug & Play ".
    I have tested out 3 switches and they are :
    Cisco Switch 16 Port 10/100
    Netgear 8 port 10/100
    Cisco Switch 8 Port 10/100
    I was able to view the camera and modify the settings, upgrade the firmware, etc. all worked, except this model !!!!
    I am losing hope on this and we are considering buying another switch which would be a waste of money.
    Is there is any possible way to enforce the port to read it?
    Also i have noticed one thing, whenver i plug the Camera to SG300-28P switch, the camera has a small led in the motherboard which keeps blinking red when its connected. It is like its trying to boot but not able too.
    I have until the end of the week, if this issue is not sorted out with this switch model, i will have to buy another one

  • Connecting printer and internet via ethernet port

    My iMac has only one ethernet port, and previously I had the printer hooked up to it. Now we have high speed internet but it requires the same port. When we try switching back and forth, the internet still works but the printer doesn't.

    Hi
    I would recommend that you invest in an inexpensive router, which should include a number of (commonly 4) ethernet ports. This will live between your high-speed modem and all your network devices, including your computer and your printer. You can then, of course, add more wired computers , and they will all be able to access the printer.
    D-Link and Linksys are decent brands for simple home routers.
    Matt

  • Write among COM ports in the same PC without cables

    How can I write to the memory address(es) of a serial COM port?  I would like to send data from one serial COM port to another in a manner similar to the that of the 'Simple Data Client' and 'Simple Data Server' vi examples.  This must sound strange since this is exactly what a null modem cable will do, externally.  I would like to eliminate the cable connection between COM ports that exsit in the same PC and communicate between them, internal to the PC, somehow. 
    Currently, I am using a LabVIEW vi to read a serial message on COM1, translate it, send the trsanslation out on COM2, so that a separate windows program (no .DLLs to interface with LabVIEW) can read the message on COM 3.  COM 2 and COM 3 are connected by a null-modem cable.  This requires three COM ports, and two serial cables.  I realize that I can use a physical loop-back jumper on COM2, for instance, where I send and read the translated message on COM2, but I still wonder if there is a method for doing this in memory, or something. Is there a way to accomplish the same objective with one cable (into COM1), no loop-back jumpers, and only two serial ports?  In summary, I want to read on COM 1, translate in LabVIEW, then write directly to another COM port, internally, without using a serial cable.  Can the 'IN PORT' or 'OUT PORT' vi's apply here?  Are these tools only for parallel ports?
    Hope this is not too confusing....  It seems like I am always trying to do something with LabVIEW that was not meant to be done....
    Thanks.

    Thank you.  If I pay the price they ask, this looks like it will create and share virtual COM ports - exactly what I need.  However, I would really like to find a way to do this in LabVIEW, such that I do not have to make my application dependent on another piece of third party software.  The 'Simple Data Client.vi' and 'Simple Data Server.vi', included in the shipset examples, seem to do this for TCP/ IP ports.  I wonder why the COM ports cannot be addressed at the memory level, in a similar manner???

  • CA-42 Com port issues - Commonfx.sys

    So installed CA-42 cable,  wont connect to phone or come up "enhancement not supported" even,
    However have found that when I go to nokia connection manager to set the com port it comes up as....commonfx.sys....which is a file used by my sound card....odd
    Any ideas on ways to solve this issue?
    Using Windows XP SP3

    What phone do you have? Nokia PCSuite includes all the USB drivers you need. Uninstall PCSuite and all the related Nokia drivers. Reinstall the latest version of PCSuite. Open PCSuite and then connect the phone using a compatible cable. When the phone prompts you, use the PCSuite tab. Now, have fun.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Communicating with COM port.

    Hi Experts,
    There is a electronic weighing machine and has a COM port ( communication port).  Can we connect to the COM port through ABAP?  I need to read the weight of the measured component to a table control directly from the weighing machine.
    Thanks and regards,
    M.Madhusudan Rao.

    http://java.sun.com/products/javacomm/

  • NOT GETTING SAME COM PORT FOR MY APPLICATIO​N

    i am making an application to connect my PC serially to a microcontroller serially with a usb to RS232 cable. how should i code in my application to ensure that my serial connection always gets the same com port whenever the applivcation is running on an other PC?  it is important to get the same com port on every machine every time else my labview coding for serial communication will fail. OR is there a better to do this. Can we code in labview so that it uses any  free com port available on the PC? the user of the application must not be prompted to enter a free com port.
    thanks for any help.
    Attachments:
    Untitled.png ‏32 KB

    No need to shout or ring my PM box... We are all volunteers here and sometimes we sleep or eat.  besides its a rather simple problem that a search on the forums would have gotten you here
    My Tag cloud would have gotten you the this same example snippet :RenameAlias
    Just use the system API to find all available serial devices.  figure out which one is your uC (how depends on the connected device) and set the MAX Alias to "MyMicroController" or something meaningful 
    Jeff

  • Programmatically assign com port

    Hi
    I have an applicaton that uses USB-Serial adapters (Keyspan).  This system is in an open lab situation with multiple users and multiple laptops runing the LabVIEW program.  Each computer's registry assigns different comports to the Keysapn USB-Serial converter.  I've been able to query the registry and determine what com port Windows has assigned to Keyspan.
    How do I take this info and programmatically assign a com port or Visa resource name that LabVIEW is to open?  Is there some simple Visa property node for "Resource Name" that I am not finding or is this more difficult than my awareness?
    All of the laptop computers will be using Windows XP and LabVIEW 8.6 runtime engine.
    Thanks
    Glen

    You can take the com port name as a string and wire it into the VISA functions.  It will generate a coercion dot, but it will work.
    Message Edited by Ravens Fan on 03-16-2009 10:30 AM
    Attachments:
    Example_VI_BD.png ‏1 KB

  • FTDI virtual com port driver (VCP) and Labview 2009 - random connection loss

    Hi,
    I am using an FTDI chip to go from USB to serial communication (FTDI Driver: 2.06.00). It seems to work at first but then after some time the connection gets lost ("connection for the given session has been lost" or "I/O error"). This happens in MAX as well as the built executable of the program I am running. Latest VISA drivers are installed - 4.6.  I have tried flushing the buffer before and after communication with both visa clear and visa buffer flush vis. The lost connection seems to happen randomly. 
    I have seen other threads about this issue but they never reach a resolution. One thing i notice is that there are two FTDI devices in this system and only one fails, however when I unplug the working device the one that fails is able to connect again.  
    To sum up here are the system specs:
    Windows XP SP3
    FTDI 2.06.00 and older 2.04.02 drivers both fail.
    2 FTDI devices on the system - they do get assigned different COM ports
    Labview 2009 run-time
    VISA 4.6 run-time
    Thanks for any help. 

    We use Targus ACH63US Super Mini USB 2.0 4-Port Hub. It doesn't require external power but if you have a high power device you will have to plug the Targus hub into two usb ports on your pc (one provides power and the other does power and data transfer). They provide the usb Y cable to do this.

  • Jabber and Mobile Connect

    Just setup Jabber (9.0.2) on iphone with Mobile Connect (CUCM 7.1.5). I run into incoming call issue where both Jabber & mobile phone would rings about the same time. I did some of research and Cisco doco below state Mobile Connect should automatically inactivated when Jabber is running and connected to the corporate network.
    Anyone has this issue or could point me to the right direction?
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9.0/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#CJAB_TK_ADA0EB97_00
    Add Mobile Connect and Mobile Identity
    Mobile Connect, formerly known as Single Number Reach (SNR), allows the native mobile phone number to ring when someone calls the office number while Cisco Jabber is not available.
    When Cisco Jabber is running and connected to the corporate network, and thus available to receive VoIP calls, Mobile Connect is automatically inactivated.
    The user requires a Mobile Identity to transfer Cisco Jabber VoIP calls to the mobile voice network.

    Remote Destinations will always ring, regardless of whether the TCT device is registered or not. A Mobile Identity will not ring when the TCT device is registered to CUCM. This is especially important as you don't want the cellular phone and the wifi phone app contending for the user to click answer on both on the same device. You may still want to use RDP if the user has a home office in addition to their smartphone.

  • Ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help

    ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it

    lol ok nvm i fixed it

  • Can the Com port on the EX90 be connecting to an AMX NI700 to receive command?

    if so, what are the pinouts for the EX90? (TX/RX/GND) The AMX uses pin 3 for TX, Pin 2 for RX and Pin 5 for GND. I have been using an RJ45 cable and trying to match pins but I am still not getting a TX signal. Also, does the COM port need to be enabled?

    The EX90 is not really build to be controlled by an additional control system.
    (in general thats a thing for the integrator prodcucts).
    The Serial port is not a RS232 (+/-25 Volt), instead of their using TTL level.
    So a direct connection without a proper cable might cause a hardware fault!
    I think the serial port was on by default, but that might have changed on the current software versions, thats what works fine for me:
    xconf // serial
    *c xConfiguration SerialPort BaudRate: 38400
    *c xConfiguration SerialPort LoginRequired: Off
    *c xConfiguration SerialPort Mode: On
    The serial port is also on the bottom of the device, its ok to use it if you need to
    troubleshoot boot issues, but besides that not really usable.
    Dont expect Cisco to do any support for this if you run in to strange behavior when
    controling the system with a 3rd party control.
    Btw, what I would strongly recommenced is to use the telnet/ssh cli or http(s) API.
    could picture that this might work with the AMX700, so why even think of using a serial port, ...

  • Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

    Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

Maybe you are looking for