Connect PeopleSoft to BPEL:Need Help

Hello,
I am trying to connect BPEL to People soft and I want to import the data from Peoplesoft to BPEL and vice-versa.
Please Anyone provide me with the details Below.
1.If we have to make any changes in any .xml files in BPEL.
2.Any configuration in Peoplesoft
3.What input to pass from BPEL to Peoplesoft to get connected.
4.Synchronous or Asynchronous BPEL Process.
5.what xsd to be prepared in BPEL.
Thanks.

8.48 and 8.49 connect to BPEL the same way.
When you say, "when I access the generated URL from internet explorer I am getting the following error," do you mean, when you access the WSDL URL or the service end point URL? Since the response has a SOAP-ENV element, I'm going to assume you are hitting the SOAP service end point URL. You can't do that from a browser. SOAP requires you to post a properly formed XML document containing the method/service you want to invoke along with any method/service parameters. The document above tells you how to generate a WSDL document for a web service. You should be able to access that WSDL document from a URL. That WSDL document describes the format of the message expected by the SOAP service.
Did you get to step 2.c in the section "Create a BPEL Process" from the document above? If so, did you see the name of your CI in the drop down below the WSDL field?

Similar Messages

My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!

My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!
1. I tried connecting it to itunes for a system reset and it didnt work.
2. The phone wont even turn on!!!

If the phone wont turn on it sounds like it needs to be charged. Plug it into a charger and wait about 15 minutes and try turning it on while still charging. Have you tried holding in your home button with the on/off button held in? Hold them both together until the apple logo comes up and then release them. The screen will blink off an on while it is resetting. I still think this is a battery issue. Good luck~

BEx Connection Failure...need help !!

This is the error message.
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=192.168.7.190, GWSERV=sapgw01, ASHOST=192.168.7.190, SYSNR=01
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host 192.168.7.190, service 3301)
TIME        Thu Aug 10 16:41:48 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r.cpp
LINE        8593
DETAIL      NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     4
Need help..asap!!
Thanks in advance.

Hi Chintai,
we got a problum when we are trying to connect to Bex to BW server. we got the same problum which you got earlier.
we the the following error message
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=10.235.245.95, GWSERV=sapgw00, ASHOST=10.235.245.95, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host 10.325.295.95, service 3300)
TIME        Mon Oct 30 17:50:50 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r.cpp
LINE        8593
DETAIL      NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     2
Please let me know whou you have resolved the issue.
Please mail me your solution. Mailid: [email protected]
Thanks
Lakshmi

I just bought an iPad and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

I just bought an iPad2 and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Basic troubleshooting
From Here
http://www.apple.com/support/ipad/basics/

So i locked myself out the ipod and i followed the steps to restore. it was restoring,,in the last eight minutes my ipod went back on and it said ipod disabled..but there was still restoring and then it said the connectioned timed out i need help

i locked myself out of my ipod and i tryed unlocking it and then the "ipod is disabled" remark shoowed up. I knew what to do to restores it but in the last one minute of restoring a message popped up and said something about it cant finish it and the connectioned timed out. I tried this at my buddies house and it did the same. Ieven my freind (whos very good in electronics and computers) couldnt do it, i need help is there anyway possible?

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.

Connecting comp. to HDTV- need help w/ cables

I recently bought a Panasonic HDTV, an E3 series, and i want to hook it up to my macbook. My macs a little old, bought it in the spring of 08 so it's a macbook 4,1. I've already got the sound issue taken care of, and i was wondering what adapter i needed for an hdmi connection with the television? Any help would be awesome!

You'll need a Mini-DVI adapter and a cable from that to your TV. Here's the various types of Mini-DVI to HDMI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_ss_i_3_9?url=search-alias%3Delectronics&field- keywords=mini-dvi+to+hdmi+adapter&sprefix=mini-dvi+
If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

Connecting Ibook to TV - Need Help

Hello. First of all let me thank all the kind people here on the forum. My computer died a few months ago, and the screen has basically died. Im looking to use my laptop through my tv. I have read the support sections of this site and am a tad confused. I have an Ibook G4 - 1.33 Ghz. I need to know what cable i should purchase in order to connect it to my tv. Thanks for your help.
Liam

You can buy a Ethernet to HDMI cable from any electronics store.
I have never heard of such a thing. A Google search turned up nothing.
Additionally, even if you have such a device how do you tell the iBook to send video out the Ethernet port?
Please verify which port this cable uses.

NWCE 7.1 backend connectivity to BI. Need Help

Hi all,
Can someone help me finding the way how to do back-end connectivity between BI and NWCE7.1. I really needed urgently. Plz help..
Thanks,

I am having the same issues--just got off phone with customer service rep--was told that my phone is in recoveyr mode and that I would have to restore it, however, the only things that would be restored would be from my last backup which was in November 2013! I was also told that apple users should not update as soon as the update is available (so why are they sending it to us if they're not sure that there will be any problems!!!). I can't restore now since I am in work--will do it when I go home tonight. In the meantime, I am without a working iphone for the day! This is horrible--I see I'm not the only one who has experienced this!

Message Persistence in BPEL-Need Help Urgently

Hi ,
Hereby mentioned is the Business scenario&steps,for which we need the handle on message.
1.BPEL Workflow dequeues the message from MQ Adapter.
2.Then it invokes the external webservice,based on the dequeued message.
3.When the external webservice is down/not active at the time of invocation,then we need to persist the complete dequeued message so that the respective transaction has to be repeated again(with the same message),once the External Webservice is UP/Active again.
Note:BPEL Workflow is asynchronous.
Do we need to do any extra coding from BPEL Perspective to achieve the above mentioned scenario?
or
is there any configuration that needs to be done so as to get the handle on such messages?
We need a solution/approach as soon as possible because we need to take a design decision based on these.
Thanks in advance for the solutions/approaches
Regards
Balaji.J

No you can use the bpel fault hander have a look at the following doc. It will have a finite timeout though as it is not designed for persistance, I suggest the is the correct way to go.
http://www.oracle.com/technology/products/ias/bpel/pdf/10133technotes.pdf
cheers
James

Attempting to update apps get "Cannot connect to iTunes Store" Need help. iPhone 3GS

Get error "Can not connect to iTunes store" when attempting to update apps on 3GS iPhone.

Hi Marcello10,
Thanks for visiting Apple Support Communities.
If you see an error message when you try to update apps, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best Regards,
Jeremy

Async BPEL - Need Help

Hi,
I'd like to make an asynchronous webservice, but I'm having difficulties understanding some things, and also it's hard to find how to define my wsdl.
First: what is essential in my wsdl for making my webservice aynchronous?
From what I understand, it's adding the ws-a soap:headers to my input message definition, along with importing the right ws-a schema. I already tried this, but when bpel invokes the service, no ws-a header elements are sent.
Second: I don't understand why the target webservice has two services/ports/bindings. The only reason for that webservice to have a callbackport is only when it invokes another async webservice.
Could anyone answer these questions, and/or provide me with some useful links?
Kind regards,
Dylan Honorez

<strike>Yes, I figured WS-A and callbacks are the most commonly used for async webservices. My question however, was meant as "how does BPEL recognize an async process, at which point does bpel decide to send ws-a headers?"
About the two ports: yes, callback port is used to define callback message. I understand this for a bpel process deployed as a service. But why would my target webservice need a callback port, since that service will be the one sending the callback message?</strike>
<br><br>
Sorry, I understand it now. Makes perfect sense!
<br><br>
Message was edited by:
[email protected]

Connection to 2WIRE problem, need help soon before I have to format

I'll start off by providing a picture
http://img218.imageshack.us/img218/8102/picture8zw1.png
Basically what happened was at first I wasn't able to connect to my Aunt's 2WIRE router, this was while I was using 10.4.9 (and after it stopped working I tried upgrading to 10.4.10 and nothing changed.) The reason why I couldn't connect was because nobody knew the password, but after calling SBC they disabled the password/WEP and disabled S SID broadcasst so that I could connect to it without any issues and without every neighbor being able to see the network.
This worked fine for about a week. Then one day it stopped working, and the only thing out of the ordinary is that the power in the house went out.
Here is the thing, I can still connect to a local Apple Network someone around me has set up. The only problem is 1) I cant stay connect for more than 10-20 mins and 2) Im stealing someone's internet basically.
I've called both SBC and Apple care. First I went to SBC, we did all the trouble shooting and they said it was a problem with my MacBook. I called Apple and they told me it was a problem with my router, but I forgot to tell them that another computer (a PC) is currently able to connect to the router, just not mine. But I called SBC again this morning and again they referred m e to apple care.... and I called Apple Care this morning but I was on hold for almost 45 mins and after 10 minutes of talking the call dropped so I just went to bed.
I think I might try calling them once more, but I'm more than likely going to format my computer. If anyone can give me any tips for I do so, please let me know.

Hiya...
Just trying to help.. I dunno what sort of router your ISP is using... But doesn't your 2Wire router or modem have a software control panel? Which could be access via HTTP?
For most routers the IP address should be 192.168.0.1 or something similar.

Connect thru VPN Client Need Help

Hi,
I have a ECC6.0 Ides in my computer.
I have another ECC6.0 as development and production in my office.
I can log to my office SAP Systems thru a IPSEC VPN.
Is it possible for my office can connect to my ECC6.0
let me know.
Regards,
Saravanan.

Hello, matt0000111111.
Did you add a VPN clients network to the sit-to-site VPN settings and to the NAT list (if nat exist at the interfaces at site-to-site vpn)?

My facebook app won't let me get in. It is asking for my password and then it says it cannot connect to server. need help

my facebook app won't let me in. it is asking for my password and then it tells me that it cannot connect to my server. How do i do this?

What did FaceBook support say about this problem when you call them about it?

BPEL Need help with Task Form's bindings' Claim

Hi,
I have a customer requirement, they want something like, if there is only one member in a group, when he views the task form from webcenter or from the worklist, the task should be automatically claimed, so he doesn't have to claim the task, and then ongo with what the task-form offers.
I have seen that Claim method comes from the bindings to the taskDetails.jspx, the code is below which auto-claims the task:
DCBindingContainer binding = (DCBindingContainer)getBindings();
DCIteratorBinding iter = binding.findIteratorBinding("taskIterator");
OperationBinding bind = bindings.getOperationBinding("Claim");
bind.execute();
However, there are two problems with this approach.
1) The Task Form isn't getting updated with the buttons that comes after claiming the task(yes-no-approve-reject-whatever).
2) If the task is allready claimed, there is an exception.
The second one, I can manage to overcome somehow, but the first one, I am asking you damn it :)
Any help would be most appreciated!

Can someone please help?

Connect PeopleSoft to BPEL:Need Help

Similar Messages

Maybe you are looking for