Connect Power Mac directly to Airport Express
Here is my situation:
I have a PC hooked up through ethernet to a wireless router/modem (came with verizon subscription) in my living room. I also have a Powerbook G4 that I connect to the internet wirelessly. Everything works great. I just picked up a Powermac G5 Quad the other day that I use in my loft and it didn't come with the airport card. My question is, can I plug the Airport Express into the wall and plug my Powermac directly in to the ethernet port, taping in to the wireless signal of the modem/router. Unfortunately I don't have any phone outlets in my loft.
Powerbook G4, Powermac G5 Quad Mac OS X (10.4.9)
Powerbook G4, Powermac G5 Quad Mac OS X (10.4.9)
My question is, can I plug the Airport Express into the wall and plug my Powermac directly in to the ethernet port, taping in to the wireless signal of the modem/router.
The only way for the AirPort Express Base Station's (AX) Ethernet port to be active is if the AX is set up to be a relay/remote base station in a Wireless Distribution System (WDS). Unfortunately, only a very few non-AirPort base stations will work with the AirPorts for WDS. (ref: http://www.dd-wrt.com/wiki/index.php?title=WDSLinked_routernetwork)
Similar Messages
-
I am trying to sync Go Rock TRMS03SR Bluetooth Portable 3D Surround Speakers with my Airport Express or iTunes So I can play Music in Multiple rooms. I have a WiFi network, my living room speakers are connected directly to Airport Express, so how can I get the wireless bluetooth speakers to play at the same time in my bedroom?
Did you ever get this to work? My guess is that the speakers are out of bluetooth range at that distance.
-
Hello all.
Lost my connection to one of two airport express units. Both purchased few years ago. Use them to stream music to house speakers via WiFi. I have v6.3.1 of Airport Utility. Message says to use v5.6 to reconfigure this base station.
How do I do that, please?
MaheshYou can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
Be sure to read the caveats at the end.
Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you. -
I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.
My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house. The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable. That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do. It's not really practical to try and move the cable connection point either.
My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power. The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with. Apple if it will do what I want.
Thanks for any help out thereI thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
I'm sure that the guy at the Apple shop means well, but he is not correct.
While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal. -
Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
Any suggestions.It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results. -
Can I play ipad / iphone etc direct to airport express without router or internet?
Can I play ipad / iphone etc direct to airport express without router or internet?
Something must produce a wireless signal to do what you want.
The AirPort Express is a router.
Is it possible to configure the AirPort Express to "create a wireless network" and then ignore the messages informing you that you do not have an Ethernet cable plugged into the Express,and do not have an Internet connection / DNS service. -
I bought an airport express and was told that I can configure it, and then move it to the G5 and connect it with the ethernet cable giving the G5 access to the network. But the laptop I first configure it to loses the connection once I remove the ethernet cable between the airport express and the modem. When I connect the G5 to the airport express nothing happens. Any ideas?
Hello Ed,
Is this how you set it up?
http://www.apple.com/airport-express/
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. -
I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.
Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device. -
After iTunes update, can't connect to remote speakers via Airport Express
I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick. -
I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?
Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?
-
Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?
Yes, he would have to have jailbroken your phone to install malware. If you see an app called "Cydia", that would indicate conclusively that it was jailbroken. I would recommend restoring the phone as new using iTunes. It is your best shot at removing a jailbreak.
You should also change your network password, your email password and your FB password as well as passwords to anything else you've used from the phone. Put a lock code on the phone.
Your best defense against this sort of thing is to NOT give your phone to people you don't trust.
This is a user-to-user forum, by the way. Apple employees don't participate here. If you want to talk to someone from Apple, make an appointment at the Genius Bar at your local Apple Store. -
cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck -
New Mac Mini-Old Airport Express won't connect to ISP?!?
My high speed cable internet connection works fine with internal ethernet connection, but I cannot get the connection to work with Airport express. Flashing amber light--indicates "problem with IPS. Do I try manual connect in Airport Start-up Assistant? Whuz-up?
Mac Mini Mac OS X (10.4.3) eMac and various Airport items
Mac Mini Mac OS X (10.4.3) eMac and various Airport itemsA little more info if needed. Modem is a Zoom, AE is set to DHCP.
-
what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks
Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Issues Connecting to internet with new Airport Express
Running a Macbook pro 15" - 10.4.11
I just bought a brand new Airport Express a few days ago. I just recently got my internet service through Comcast restored and am eager to get a wireless network up so I can play Xbox Live again.
So issue is this: I plug the ethernet cable from the Cable modem into the airport, the light goes green. The computer is registering a strong signal, Network preferences says Airport is connected to my network. However, Safari keeps saying its not connected to the internet. When i run system diagnostics, I get a green light on Airport, Network settings, system settings, and ISP. But the light on Internet and Server stay red, and Diagnostics says it can't fix the problem and I need to contact my ISP. Comcast said they couldn't help, my connection was fine and they even refreshed it to no avail. When I plug my Ethernet cable directly into my Macbook pro, I get on the 'net no problem. I'm dumbfounded.
I'd appreciate any sage wisdom offered. Thanks!
p.s: Also, when I run a connection test on Xbox 360, it picks up my network, connects quickly, ISP confirms, but ultimately fails at DNS Server. Hmm.bl4ckr4bbit, Welcome to the discussion area!
Most cable modems require that you power them off when you switch the Ethernet connection from one device to another. Until you reset the modem it will not communicate with the new device. When the modem is powered on it detects the new device and starts talking to it.
Some cable modems have a reset button on the back for this reset.
Some cable modems have a small internal battery which must be removed for this reset to occur.
Sometimes the cable modems must be unplugged several hours or even overnight to allow equipment back at the ISP to reset.
Did you power off the cable modem when switching the Ethernet connection?
Maybe you are looking for
-
Skin Customization in Oracle Identity Manager 11g Release 2 (11.1.2)
I was recently tasked with branding an OIM instance to match pretty stringent branding standards. To accomplish this task, I extended the fusion theme which is provided out of the box into a new custom skin. In the example below, I took the design as
-
Error occurs with Adobe Reader on romanian Systems
I have encountered an error in the Version 11.0.10 of "Adobe Reader XI - Romanian" running on a Windows 7, Service pack 1, 32-bit Operating System with a romanian language pack. In Detail the issue appears on opening a pdf-file, showing that there is
-
How to call derived class to base class
Hello everybody, I create a GUi application in java swing. Now i want to navigate between the screen but the timing between the screen is very slow bcoz i imported the class from package to another package. Now i want to extends one package to anothe
-
Air 1.5 - FileBrowse Window doesnt open
hi, since Adobe Air 1.5 in our application the Flash Uploads doenst work anymore. If we want to open the browse window to browse to the files on the pc the window is not opened. No error. nothing. Upload Script ist "SWFUpload" Any idea?
-
How to install JCO in linux system?
How to install JCO in linux system?Thanks.