Connect PowerMac G5 to iMac via Mini Display

I am trying to connect my old PowerMac G5 to my mid 2011 iMac. There is a dual DVI card in the back, and a small cord connects to DVI and Converts to VGA. So here is my question, can I order a male VGA cable and connect that to an adapter that connects VGA to mini display? Also, how do I display the PowerMac G5 on my iMac?
Thank you for your help

can I order a male VGA cable and connect that to an adapter that connects VGA to mini display?
No.
how do I display the PowerMac G5 on my iMac?
Setting up Screen Sharing & Control, allow the G5 to be used in G5>Sys Prefs>Sharing, then on the iMac>Finder>Connect to Server.

Similar Messages

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?

Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!

danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

This Apple article:
What are the requirements for TDM?
suggests that older iMac do not support Target Dispaly Mode.

After 10.9 - no alt display via mini display

I have a 2013 Mac Book Pro connected to a TV with a mini display port to HDMI adapter.
the TV screen don't appear and if I press option (alt) key while choosing the option I can't see more screen to select.

Hello there, chevaux99.
The following Knowledge Base article provides some great recommendations for troubleshooting issues with external displays:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Connecting two 27" iMacs via mini DisplayPort

Juz a thought. Wonder if possible.
Since the 27-incher iMac does video input and output, instead of buying two 30" displays ($1799 each), might as well buy two of these 27" iMacs ($1999 each) and connect them via their mini DisplayPorts. Wonder if it's possible to use one 27-incher for computing and use the other as a second monitor, and switch around whenever it's needed. Kinda cool to have two 27-inchers and Macs on one table top.

There is no reason why that would not work. It would be the same as connecting a MacBook or a Mac mini or a Mac Pro (any Mac with a Mini DisplayPort) that same way to use the 27-inch iMac's big screen as a second display, which is the primary purpose of this feature. It should not matter if the primary Mac happens to be another 27-inch iMac.
And the second iMac would not be "just the display to extend my screen." It is fully operational, so it can be doing tasks in the background. It can be acting as a file or web server, or processing video, or downloading/uploading files. I believe there is a keystroke to toggle the display, and you can probably even control it using +Screen Sharing+ from the other iMac (as long as the two are connected over a network).
What would be really interesting to know, from someone who actually has two of these iMac sitting side-by-side, connected with a Mini DisplayPort cable, is if you can use either iMac as the extended Desktop screen for the other iMac, on-the-fly. So you'd be working on iMac A with iMac B being the second display. Then, you switch to the working on iMac B with iMac A being the second display. And do it with a few keystrokes and no rebooting. Now, that would be cool.

Can I buy a new iMac with mini display connection instead of thunderbolt?

I have a 2009 MacBook Pro which I would like to connect to use the display & am aware that a 2009 MacBook will not connect to a Thunderbolt Display. My husband has a new MacBook Air which has thunderbolt, but I think he can get a thunderbolt to mini display connector for him to use.

I want to be able to connect my 2009 MacBook Pro to the display on the iMac. The reason I asked about the display is because I know thunderbolt is not compatible with a 2009 MacBook Pro.
From reading other posts I understand that the Cinema Display connections are compatible but not the Thunderbolt Display connection.
I am presuming that the display that comes with the iMac is the same as the Thunderbolt Display which can be purchased separately, but maybe I am wrong?
Thanks for your help.
Lynn

Connect MacBook Pro 3,1 to hdmi tv via mini-display port

How do I connect my MacBook Pro 3,1 (2007) to an hdmi port on a LCD TV using the mini-display
port on my Mac? I am running Snow Leopard 10.6.8.
I have connected a mini-display to hdmi connector into an HDMI port on the TV. I've watched lots of youtube videos
on how to do this (apparently with newer Macs), but when I go to 'system preferences/displays', I have no options like 'extended TV'
or 'mirroring' and I have no resolution choices with a 'p' behind it. I've tried 'command-F1' as someone
suggested to make it 'mirror' and nothing happens.

How do I connect my MacBook Pro 3,1 (2007) to an hdmi port on a LCD TV using the mini-display
port on my Mac? I am running Snow Leopard 10.6.8.
I have connected a mini-display to hdmi connector into an HDMI port on the TV. I've watched lots of youtube videos
on how to do this (apparently with newer Macs), but when I go to 'system preferences/displays', I have no options like 'extended TV'
or 'mirroring' and I have no resolution choices with a 'p' behind it. I've tried 'command-F1' as someone
suggested to make it 'mirror' and nothing happens.

NTSC monitor component/RGB to Imac via min-displayport

I'm trying to hook up an NTSC monitor which only has RGB and component (Y, R-Y, B-Y) ports to my 2009 iMac, which thus must use a min-display port to do so.
Does anyone know of the best way of connecting this NTSC monitor to my iMac? I had thought about...mini displayport/DVI-->DVI to component.
Although mini displayport/VGA-->VGA to component might work too.
One concern I had was that I heard the mini displayports were DVI-D opposed to DVI-I, which may or not mean a component adapter would work.
help lol.
thanks

There was a long thread on the forum with good info regarding conversion of Mini DisplayPort to composite/S-Video.
http://discussions.apple.com/thread.jspa?messageID=9692969
I don't think component will work for the same reasons, unless you use something like the rather complex method explained in the post by Lougle in the above thread (the one with pictures). Maybe it is different...
I thought of something the other day though. OWC has a recent USB video adapter product.
http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
I wonder if you could put a DVI-to-component adapter (or a DVI-to-composite adapter) at the end of this USB-to-DVI adapter, and get it to work. I don't think the product description has the answer, and I was going to send an email to OWC's sales/tech support to ask. I'm only curious, since I don't need such an output myself. If you decide to ask them, please post back with their response.

No sound via mini display to HDMI connector

Hi all,
I have the i7 8G ram version of the X1 Carbon (UK version) and love it. The only issue I have with it is in relation to the mini display port. I use a lot of HDMI equipment so immediately bought the mini display to HDMI connector from Grifin, see http://store.griffintechnology.com/video-display-converter but whilst video exports fine no sound is being output via the HDMI cable and end up sound via the X1 speakers which are great for personal use but useless in a large room full of people.
I already contacted Griffin support and they quickly referred me to Lenovo.
All help much appreciated.
Ben
Solved!
Go to Solution.

BenEadir,
When you have a video or sound file playing, go to Control Panel, Sounds, Manage Audio Devices.
Then when you are in Manage Audio Devices, you will se a list of devices and the external device/TV your mini display port is connected to as one of the options. Just choose the one you want and set it as your default audio device and the sound should automatically go to the selected device.
Let me know if this works for you.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Samsung LA32B530 Not Recognised via Mini Display Port

Hi,
Tried connecting a Samsung LA32B530 LCD Screen to my MBP. The Screen is not recognised by the system. The screen is connected via the Mini Display Port to DVI adapter and from there via a DVI to HDMI cable. Screen on flickers blue when I plug the screen in but no signal recognised by screen and the screen is not recognised in the control panel.
The MBP is connected to the screen via the HDMI1 port which is said by Samsung to be used with a DVI to HDMI cables.
Any suggestions?

Try a PRAM and SMC Reset
http://support.apple.com/kb/ht1379 for PRAM
http://support.apple.com/kb/ht3964 for SMC
If you have selected and switched to the correct HDMI ports with your TV Controller
Then try another lead.
see further threads here
https://discussions.apple.com/message/21042936#21042936

2011 iMac missing mini display port?

I'm trying to connect my 2011 iMac to an additional display using the mini display to DVI, but my computer doesn't have a mini display port I can't seem to find this info anywhere. What kind of adapter do I need?

No the thunderbolt port should fit mini display port adapters too........there are just more pins on the same size and shape port.......you sure you have a mini display adapter?

What do I need to connect my late 2009 Mac book (mini display port) to the TV and get sound?

I'm totally confused!
I have a late 2009 model Macbook. And I want to connect it to my TV.
So my research has led to believing I need a Mini display port adapter and a HDMI cable - but from some of what I have read, this won't carry sound...
Can anyone clarify this and what I do actually need?

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with theHDMI.
If you have the Late 2009 model 6,1 White Unibody with the MiniDisplay Port there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter

I have a MacBook Pro(Mid 2012, running OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal. Do I need to do something in settings?

Hi psikalis,
If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
- Brenden

Connect PowerMac G5 to iMac via Mini Display

Similar Messages

Maybe you are looking for