Connect report output to third party systen

Dear Techis
Can we connect Report output to third party system and hw?
Pls advice............

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

Similar Messages

Connect Report output to third party system

Dear Techis
Can we connect Report output to third party system and hw?
Pls advice............

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

IC WebClient Connectivity with ICI and Third Party Solution (Genesys)

<b>Hi Techies,
Can any body give the information about the IC WebClient Connectivity with ICI and Third Party Solution (Especially Chat and Mail Configuration with Web Client in CRM). We are using CRM 5.0 server with Java+Abap Engine. I need configuration for Web Client Genesys(Third Party) with ICI configuration. I dont have idea regarding this. I 've little idea on Business Communication Broker. Can any help me out in this regard. Thanks in an advance. If u have any document it can be acceptable.
Regds,</b>
Govinda
[email protected]

We are looking for a site to site model. I want all the devices on the remote network to be on their own subnet. We need to be able to hit individual remote devices from the head end. The devices at the remote site in turn also need to be able to communicate with each other without having to use the VPN.

How to connect Developer 6i with third party Databases

How to connect Developer 6i with third party Databases

Hi,
Oracle Forms 6i comes with a Oracle Client Adaptor, OCA, that allows you to connect to 3rd party databases. Starting Forms 9i you use gateways.
Frank

How can I call reports from a third party tool?

Hi!
I'm a Delphi 6 developer and our company has a customer that want to call reports created in Crystal Reports directly from our software.
What is the quickest way to open a report from a third party tool (passing parameters) ?
There is a way to do that without embedding Crystal VCL components in Delphi? I'm searching for a command line tool or a way to open it with URLs....
Thanks in advance!
Edited by: AlmirB on May 23, 2011 6:25 PM

One of the 3rd-party Crystal Reports viewers listed at http://www.kenhamady.com/bookmarks.html provides a full command line API, so you can call a report from your app and pass parameter values, login info, etc.

Report export to third party syslog server

Hi all,
Is there a way to send the Cisco ACS secure server report to third party syslog server?
Example: for audit purpose, i need the data extract from Monitoring & Reports > Reports > Catalog > AAA Protocol
I trying by create new remote log targets, the IP is pointing to third party syslog server.
and at the logging categories > global, i apply the new create log collector to all logging categoires.
Am i doing it right?
please comment, thanks
Noel

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

Number of remote RFC connections to SAP from third party application

Hi All,
We are using an external application which is using the JCO API to make a connection to the SAP server to pass invoices. But the connections are note properly closed after invoking the RFCs and SAP seems to be not able to handle further requests once the numer of connections reach the maximum limit.
Could you tell whether there is a max limit on the number of connections opened to SAP from remote function calls from a third party product?
Is there anyway by which we can make sure that connections are properly closed in SAP after the each remote call?
Thanks in advance for your pointers.
Regards
Arun

Dear Arun,
Here are the parameter settings which you can do to set up RFC connections to SAP servers.
http://help.sap.com/saphelp_nw70/helpdata/en/c3/ce70a5cf0ab1499bfbf464e6e92de0/frameset.htm
This will resolve all your problems.
Thanks & Regards
Vivek

Connecting ibook g4 with third-party wireless network

i've got a ibook g4 with an airport extreme card that i'm trying to connect to a third-party wireless network. When i am right beside the router, it works at about 75%, but I walk 15 feet away and the signal is totally gone. the computer the router is hooked up to is a PC, and so are the other three computers in the house that access the wireless network. The PC's are all further away from the router, yet they can still get a basic signal. Why is my mac not working with this and what can i do about it?
router: d-link 802.11g/2.4Ghz
my ibook: g4, 14", superdrive

You can verify that the antenna wire is properly attached to the AirPort Extreme card. See the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

Ethercat connection between windowsPC an third party device.

We want to create an ehtercat connection between a windowsPC an a frequency converter from Stöber(company).
The connection has not to be real-time capable.
Is this connection possible without buying any third-party drivers?
rgds Reinhard

Hi Reinhard,
Our EtherCAT driver only works for our Real-Time targets. Unfortunately, there is no Windows solution for NI-Industrial Communications for EtherCAT.
Matt S.
Industrial Communications Product Support Engineer
National Instruments

Connection of TREX and Third Party WebApplication

Hello,
we need detailed information how to access TREX 6.1 by a Third Party Web Application. The scenario can be described as follows:
We want to to enter a search query into the Third Party Web Application and send the query to TREX. Therefore we want to know whether we need a gateway or interface. Additionally we need to know the query syntax to make TREX understand what shall be searched for. The main questions is: How can we submit the search query to the trex web server? Finally we have to interpret the answer. Here are the main questions: How does the answer look like (format)? And which information will be delivered?
Please don't link us to KM Indexmanagement APIs for search with TREX!
Regards
Steffen

Thank you very much, Karsten!
Your answer came as quick as a flash I do not really miss a thing at the KM IMS, but this question was a customers challenge. So I have to explain that Java or ABAP is needed inevitably to access the records of an index or rather perfom a getRecord-functionality with documents stored in TREX.
Best regards
Steffen

Intermittent connectivity, possibly due to third-party 802.11b bridge?

I use a Linksys 802.11b wireless bridge/switch/router with a 12" G4 iBook and up until recently, everything worked just fine.
Then about two weeks ago I brought home a 12" G4 PowerBook and tried to use it with this wireless network. The PowerBook is able to connect and about 50% of the time everything works fine. However occasionally I'm unable to transfer data across the network. The Wireless connection never "drops" (there is no indication that it is unavailable via the menu bar or the control panel) but once this happens I usually have to restart the computer to get things back to normal.
The time I see this the most is when I'm moving large files around on the network, either large internet downloads or just copying large files from the laptop to a NAS device I have connected to the LAN using a wired 100mbps connection.
It seems like a long time ago I had a Windows laptop with an 802.11g card and when I'd bring that up with this configuration some similar problems would occur, but that was a long time ago so I can't confirm this.
What I'm suspecting is that since the bridge is 802.11b the wireless cards in the iBook and PowerBook need to run in "b" mode. Maybe the card in the iBook does a better job of this than the PowerBook?
If my theory is correct than picking up an 802.11g bridge should do the trick, but I wanted to see if there were any other things I could try before throwing more hardware at the problem. One thought I had would be to force the wireless card in the PowerBook to use 802.11b always, but I couldn't find a way to force this configuration.
Any thoughts or assistance is appreciated!

You shouldn't have to make any changes with the Airport Admin Utility. On the Acer, just add a new network connection using the "New Connection Wizard," follow the instructions and enter your network's security password when prompted.
Dual 1.25 G4 & Dual USB iBook Mac OS X (10.4.5)

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

Can i connect pci-7344 to my third party motor and drive without umi-7764 ?

Our Lab have NI pci-7344 motion controller and third party motor and drive made by other company.
We want to connect pci-7344 and third party motor & drive without umi-7764.
Just use cable.
Can we succeed to connect them ?

In general it is possible to connect the PCI-7344 to a motor drive without using a UMI-7764 but you will loose some safety features and the level of noise immunity for encoder signals will be decreased.
Please have a look at this link for more information.
Best regards,
Jochen Klier
National Instruments Germany
Message Edited by Jochen on 01-05-2007 10:19 AM

Credit check issue in third party order

Dear all,
We are facing some issues related to credit management data for one of our customer. I need your valuable inputs for below mentioned queries-
1. As a genaral question- When we releases a SO through VKM* How the system calculated the " Released Credit Value of the document".
2- For one of the customers, the FD33 shows a Sales value X USD. As i see the split of this sales value , this X USD amounts to OPEN DELIVERIES. Both Open So and Open billing are zero. We tried to check with no. of tcodes to find out the open values but no such Open delv document is appeared.
In VC/2, it only shows Open SO, no open deliveries are there.
So i tried with simulation program RVKRED88, and found 5 third party Sales documents , against which some value is coming under the Open delivery value and it sums up to the value as coming in FD33.
I have a few questions on this-
> All the SO in output are Third party SO, against which PO has been created, ( Third party So> PR> PO> MIRO--> billing) and all are in status OPEN, so how come they are showing value in OPEN DELIVERY ?
--> The value appearing against these third party SO is Not equal to items value/net value, it is a complete different value than appearing in SO. But in SO changes history , the same value is coming AS RELEASED CREDIT VALUE. How is it being calculated?
For eg- for one of the Third party SO , the value coming in RVKRED88 is 29573.53 USD,
                                                            net value in So= 24,120.00 USD, Qty = 6000 PC , Credit price= 4.02 USD
                                                            Credit value of So in VBAk= 29573.53 USD
                                                           SO created , released on 08.July.2011, confirmed schedule line =08.Oct.2011
Credit settings- Static check + Credit active Item cat and SO , Open So and open delv are ticked in credit settings.
Kindly help in the analysis.
many thanks in advance for the inputs.

Hi Dharmendra,
1. When we release a sales order using VKM* transaction S066 information structure and OEIKW field is updated which increases open order value.
2. If there is mismatch in the values of credit related fields run RVKRED77 (Re-organisation of credit in case of update errors) this will update all the credit data for a Payer customer in real time. RVKRED88 is simulation mode.
3. Updating of values related to credit is controlled by the update group assigned to credit control area. If system is not able to update using the assigned update group it will automatically try updating using the next update group. Below is the text of SAP Help.
If a document cannot be processed with the update group you specify, the system determines the next possible update it can carry out. For example, you select Update group 000012 which, at delivery, reduces the open order value and increases the open delivery value. Assume that one item in the order is not relevant for delivery. In this case, the system automatically determines Update group 000018 for this item. Update group 000018 increases the open delivery value for the order item. The system uses the confirmed quantity of delivery-relevant schedule lines to update the order value
As you know in OVA8 transaction credit control area, Risk category, credit group and currency are assigned to update group.

HR with third party app?

looks like Strava and Runkeeper apps on the watch don't display HR. Is Apple blocking the HR output for third party apps? I want to find a good app to track my runs and other cardio workouts but also want to display HR on the watch.

Hi,
As the error message suggests, it is not supported to add this app into a site template. To work around this issue, it is recommended to remove this app from your
site before saving it as template.
The KB article below would provide more details about this issue:
https://support.microsoft.com/en-us/kb/2885566?wa=wsignin1.0
To install this app to the specific sites you want in a batch, administrators can also use the App Catalog to push apps to specific site collections, managed paths,
and site templates.
More information about this:
http://blogs.msdn.com/b/richard_dizeregas_blog/archive/2013/03/04/sharepoint-2013-app-deployment-through-quot-app-stapling-quot.aspx
https://msdn.microsoft.com/en-us/library/office/fp179896.aspx?f=255&MSPPError=-2147217396
I would also suggest you submit a feedback to the Office Developer Platform if there any expectation about the future version of Office 365 SharePoint Online:
http://officespdev.uservoice.com/
It
is a place for customers provide feedback about Microsoft Office products. What’s more, if a feedback is high voted there by other customers, it will be promising that Microsoft
Product Team will take it into consideration when designing the next version in the future.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Connect report output to third party systen

Similar Messages

Maybe you are looking for