Connect scanjet 4670 to windows 8

is there a driver I can use to connect scanjet 4670 to windows 8

Hi,
Please read:
http://h30499.www3.hp.com/t5/Scanners/hp-scanjet-4670-and-Windows-8-incompatibility/td-p/5923129#.VO...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Help install hp scanjet 4670 on windows 8.1

help install hp scanjet 4670 on windows 8.1 Have A Sony Vaio Tap 20. On Board Windows 8.1(64-bit). Have a scanner HP Scanjet 4670. How to make friends with these two devices? Poke his nose into the right drivers and software. Thanks in advance!!

Есть Sony Vaio Tap 20. На борту Винда 8.1. Есть сканер HP Scanjet 4670. Как подружить эти два устройства? Ткните носом в нужные драйвера и ПО. Заранее благодарен!!!

Scanjet 4670 - work on Windows 8.1 x64

Hello,
I have found that, for the Scanjet 4670 scanner, the drivers for Vista x64 works very well with Windows 8.1 x64. So this scanner is not incompatible with Windows 8.1 x64. Just download the Vista x64 drivers from the HP website. I hope that this information is helpful to other users.
Giuseppe

Hello enantio,
I see that this is your first time on the HP Forums and I just would like to say "Welcome"
I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I would also like to give you a HUGE thank's for the information. That is excellent information and I am more than confident that it will help others with this issue.
I would also like to direct your attention to the following link for Third-party scan software solutions.
If you have any questions or concerns or even more great tip's, please feel free to write us back.
Thank's once again for the information. Have a great Wednesday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Scanjet 4670 compatibility

I am seeking a software driver compatible with Mavericks (OS X 10.9) to run my old but grea HP Scanjet 4670. When I installed Maverick, it announced that it was not compatible with the one previously installed.

Try using the Image Capture app in your Applications folder for scanning.
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

Mac Mini using OS X Tiger does not see my HP Scanjet 4670 scanner! HELP!!!!

I have an HP Scanjet 4670 scanner which worked fine on my pervious mac which was an emac with OS X Panther.
However, I now own a G4 Mac Mini running with OS X Tiger and recenly tried to use my scanner with it for the first time only to get the message: "scanner not found" I then went straight to my System Profiler to look at the USB Device Tree and was shocked to see that all my USB devices show up EXCEPT my scanner!
Mechanically, the scanner appears fine (even when I run its 'Hardware Test') but no matter what I do I cant get the Mac to 'see' it. I have reinstalled the HP scanner software old AND new, but to no avail. Although, I'm sure that even with NO HP software on my Mac, the System Profiler should still be detecting a USB device on its tree.
Just out of curiosty I connected my scanner to my old emac (my girlfriend has had it for a few months now) and it has the same problems there too!! WEIRD OR WHAT? The emac is STILL running on Panther - although during the months AFTER I gave it to my GF there has been some minor OSX Panther upgrades installed.
Is it just coincidental bad luck that my scanner became faulty when I changed mac and operating systems? Or is there an OS X Tiger problem lurking somwhere here?
PLEASE PLEASE can someone offer suggestions!!!!????? It is a lovely looking, decent scanner which was not cheap to buy and is only under 2 years old!!!

Looks like you're using software for this scanner that was for Panther only.
Try downloading HP's version of the scanner's software for Tiger.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&lang=en&dlc=en&produ ct=303641&os=219
And run software update to make sure you're running the latest Tiger update.
If you're already doing this, or it still doesn't work, it could be a damaged USB cable (as your girlfriend Panther system doesn't see it either).

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Cured the problem! Reinstalled an earlier version of itunes from oldapps.com (version 10) now everything works as it should. I would suggest that if you are experiencing these problems that you do the same. I must say that it is a brave business decision on behalf of apple to effectively lock out all windows 7 users from their products and sales channels and I can only wish them luck in this very shortsighted policy.

Connect to Mac from Windows

I have three Windows systems and one Mac.
Currently, to connect to my Mac (OSX Tiger) from Windows I have to be logged into the Mac as that user on the Windows machine.
I have three users that access the Mac. All are setup on the Mac as users. All are setup on the Windows systems as users.
But if John logs into the Mac and Betty tries to access the Mac from her computer she cannot. If John tries to access the Mac from his Windows system he can.
Does anyone know how to setup the Mac so that any of the three users can connect to it from Windows regardless of who is logged in?
I tried to set the group to staff for all the users public folders but that did not help.

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

My ipod shuffle 4th doesn't connect to itunes or windows, what can I do?

hello,
it's been like 2 weeks since I did the update of itunes and everything to get my ipod shuffle 4th generation, and also did all the troubleshooting from the apple page, and nothing happens. It doesn't connect to itunes or windows.
anyone of you have the same problem or know how to solve it??
thx a lot!!

I'm having the same problem, my brand new Ipod shuffle isn't recognized by my pc, or Itunes. I have tried everything suggested in troubleshooting. Did I just waste $50 on something that doesn't work? I'm afraid if I send the Ipod back for another one I will have the same problem. Any suggestions ?

When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason thia is happening?windows

When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason this is happening?windows

Are you using DHCP to allocate IP addresses via your router or Static IP allocation?
You may have an IP conflict in your network.
Check on your various network configuration parameters in your iPad, PC and WiFi router.

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iPod will not connect to itunes after windows 8.1 download

My iPOD will not connect to itunes after windows 8.1 download
I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
My ipod does work on my old computer and it was working on windows 8 before I update to 8.1
I don't want to installed again because I just did that and didn't work!
I want to use my iPod on this computer and system. Can this be fix?

Hey TheBurntApple,
Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Cannot connect from iMac to Windows Home Server 2011 shares

Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
Simi

You need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

Load balancing 10g forms - Connection from new browser window not supported

Load balancing 10g forms - Connection from new browser window not supported
We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
<session-tracking
cookies="enabled">
</session-tracking>
This all works fine in most cases.
The problem I am having is if I do one of the following on the client machine:
1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
The problem is that I need this enabled in order for the load balancing to work.
Does anyone know of any other workarounds or patches that might help resolve this?
We're using Application server 10.1.2.0.2 running on windows 2003 servers.

You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
Has anyone actually managed to get this to work, or am I doing something wrong?
I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
I'm at the point now of giving up and writing some custom scripts to do the job instead...

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

Connect scanjet 4670 to windows 8

Similar Messages

Maybe you are looking for