Connect signal to scxi-1349 male breakout connector directly

Dear all,
My hardware are pci-6259, scxi-1000, 3 scxi-1102b. I connect scxi-1000 to the connector 0 of pci-6259 for ai signal acquisition. It's works well. But now I want to get counter signal(encorder) too.
My question is whether I can connect counter signal to scxi-1349 male breakout connector directly use a connector made by myself or not.
I aleady try,but it does not work.
Thank you
syi

Hi Alex,
I'm sorry you had to wait for an answer for quite a long time.
To be honest, I don't really get your question.
One AI Input for the Cable on the USB 6259 has the range for 16 Signals.
So you can't send 24 Signals in one cable, as long as you don't add the signals in diferrent frequencies
and seperate them afterwards programatically..
But if you just want to get the Signal in the normal way you would need 2 cables for that.
Regards

Similar Messages

What is the difference between SCXI-1349 adapter and DIO-24 adapter(in SCXI-1353 assembly)

I have an SCXI 1353 cable assembly. How do I differentiate between these two adapters ?

Sasi,
Hello, the SCXI-1349 adapter is is used for connecting 68-pin MIO E Series devices to an SCXI chassis.
The SCXI 1353 (comes with two adapters) is used for connecting 100-pin MIO E Series boards to an SCXI chassis. The first adapter is identical to the SCXI-1349, while the second adapter routes the extended analog or digital signals to the SCXI digital modules or breadboarding modules.
Good luck with your application!

Scxi-1349 versions

Hallo all, I have a doubt.
In the past, I'm sure I have seen a document (on NI website or Devzone, but I can't find it now easily), where I read that it is necessary to choose different versions of the SCXI-1349 module, when you use this adapter, connected by a 68 pin cable, with E-Series DAQ or M-Series DAQ. Is it true?
If that is the case, which is the association between the different types of DAQ Board and different versions of the Adapter?
And how can I recognize the version of the adapters I have bought in the past? Searching in some way with the S/N, or watching, for example, a label on the product?
Thank you for your help!
Stefano
Solved!
Go to Solution.

Hi Stefano.
SCXI-1349 is fully compatible both with E-series DAQ and with M-series DAQ.
If you use E-Series DAQ you must connect the card to the connector with SH-68-68-EP cable, indeed you must use SHC-68-68-EPM cable with M-Series DAQ.
For many infos you can chek the following links:
http://digital.ni.com/public.nsf/allkb/7644E54DD42D4A45862570A4007E1669
http://digital.ni.com/public.nsf/websearch/598A68C99373CF0886256F4600721018?OpenDocument
Bye!
MarcoMar
National Instruments Italy

How to connect my Iridium 9555 to a USB connector on the Mac OS 10.7.3?

How to connect my Iridium 9555 to a USB connector on the Mac OS 10.7.3?
i can not create a new network configuration via USB interface on 10.7.3.

Doesn't look like they've updated their driver in a while. October 15 - 2010.
Typically old drivers and 10.7 don't get along so well. Short answer, unless you know how to write a driver, you might be outa luck.
Call their support line and see what they say.
-G

My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock.

My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock, only through the iPod's internal speaker. Help please!

Have you tried resetting both the iPod and dock? To reset the iPod, press and hold the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
To reset the dock, unplug it and plug it back in.
B-rock

Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
You will need to the Lightning to VGA adapter directly
http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
Or the Lightning Digital AV Adapter
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
If the projector supports HDMI input.

Can't connect to external Oracle DB with JDBC connector

Hello guys,
I had failed to connect to connect external Oracle via JDBC connector .
Could you please help me to resolve the problem ?
Backgroud:
We need to connect the external Oracle DB with JDBC connector, because BI need to connect to the target Oracle. If the JDBC connector suceed, BI will create a UD which use the datasource
we create in Visual admin to connect to the external Oracle DB.
Environment:
Our EP version is NW04S SP17 , OS is AIX .
The target Oracle DB version is 10g(10.1.0.2.0, 64bi).
Configuration procedure :
1. Import Oracle driver "ojdbc14.jar" and create new driver which named "Oracle " under
JDBC Connector ->Run time ->Driver in Visual Admin.
2. Create datasource "Mydatasource" under JDBC Connector ->Run time ->Data Source,
Name : Mydatasource
Driver Name : Oracle
JDBC version: 2.0(with XA support)
JDBC compliant:
Object Factory :oracle.jdbc.pool.OracleDataSourceFactory
DataSource Type: ConnectionPoolDataSource
*CPDS class name :oracle.jdbc.pool.OracleConnectionPoolDataSource
Additional:
Additional Properties:
DatabaseName:LPAR8TEST
DriverName:oracle.jdbc.OracleDriver
Password: *****
PortNumber:1521
ServerName: 10.1.16.208
URL :jdbc:oracel:[email protected]:1521:LPAR8TEST
User:IMPL
Connectoin Pool:
Initial Connectons: 1                                         Expiration: (check)
Maximum Connections: 25                                  Connection Lifetime :600
Maximum time wait of connection : 60                  Cleanup Thread : 200
Default Connectoin Isolaton :Default
SQL Engine:
Open SQL
3.Create Connector :
   Copy the standard connector :SDK_JDBC to SDK_JDBC_Oracle,
Resource Adopter:
Loader References:
Add "libray:Oracle" .
Managed Connection Factory:
Configuration Property:
DriverName:oracle.jdbc.OracleDriver
Password: ****
User:IMPL
URL: jdbc:oracle:[email protected]:1521:LPAR8TEST
All fo my configuration had been listed.
And I had created JCO RFC : JT-BIDEV_PORTAL_BD1 , and created RFC connection with SM59 in BI.
Please give me some suggesiton.
Thanks.
Louis

When I try to start datasoure "Mydatasource" , it display error, error detail:
java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during start of application "sap.com/Mydatasource". [id = StartupError]
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:608)
Caused by: java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "CGNPC".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "Mydatasource".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
          u2026.
When I try to test JDBC with URL : http://jt-pldev:50000/TestJDBC_Web/TestJDBCPage.jsp,
First I choose connection name "SDK_JDBC_Oracle" .
If I click "Check Connectons", it display :
500   Internal Server Error
SAP J2EE Engine/7.00
Application error occurred during request processing.
Details:
java.lang.NoClassDefFoundError: com.sap.ip.bi.sdk.dac.connector.odbo.impl.Connection (initialization failure)
Exception id: [001A64A86F2C006B000004C40010302A000469C74E86A096]
If I click "Slecton Connection", it display:
500   Internal Server Error
SAP J2EE Engine/7.00
Application error occurred during request processing.
Details:
com.sap.engine.frame.core.load.SAPNoClassDefFoundError: javax.resource.Referenceable
Exception id: [001A64A86F2C0063000004C00010302A000469C74FA2BB59]

Connection issue for Power BI Analysis Services Connector

Hi,
I have a problem with the connection to power bi.
the analysis services connector was installed correctly and I see in my account of power bi the tabular server, but, when wanting to deploy
database it marks me the following error: IMDExternalConnection
the user that I set as administrator has permissions on the server tabular connector.
An example :
register my account with this email from my work : [email protected], and the domain user is [email protected]
could you guide me to know why this mistake is happening?
what credentials does power bi use to access my tabular server ?
Greetings!

Hi,
Can you please share a screenshot of the error message? Is it during the installation/configuration of the connector?
If yes, I suspect it is due to invalid credentials. You need to use your windows account of the Analysis Services server admin.
If the error is during connecting to AS server from Power BI, most likely it is due to a effective user name mismatch. The 6th FAQ listed in this blog post talks about the IMDExternal connection error -
http://blogs.msdn.com/b/powerbi/archive/2015/03/11/power-bi-analysis-services-connector-deep-dive.aspx#faq
Please check it out & let us know if your issue is resolved.
Thanks,
Mini

How to improve quality of time capsule connection signal?

how to improve quality of time capsule connection signal?
i have one time capsule in Ground floor but the signal is very weak in the first floor? how can i improve the Quality internet signal???

wassimfrombeirut wrote:
Dear LaPastenague
Thank you for your reply
i just need to ask you a question; i am a new system admin using mac.
i need a software that can manage my internet bandwidth; qouta; and restriction to facebook; youtube and other web
could you guide me to a software i can use????
note that my environment is fully mac laptop; and using Time capsule as Wi Fi source to connect to enternet.
thank you;
best regards
wassim;
The best software to do what you want, is not on a Mac. It is a router.. gargoyle.
You can keep using the TC as wifi source but get a router that can can take gargoyle firmware.. the best in my testing is netgear WNDR3700. Gargoyle itself is a free download.
http://www.gargoyle-router.com/download.php
There are other routers and router boards it will work on.. but make sure you pick something compatible. I have used several different routers and the one above is the best so far.

Sending analog signals using SCXI bus to SCXI-1600 for digitizing

I want to measure a signal generated in the SCXI-1181 custom bread board module.
Is it possible to send the signal using SCXI bus to SCXI-1600.
The signal is less than +5V & is positive.
Is it possible to use AB0+ & ABO- in SCXI bus for this purpose?
I have a SCXI-1001 chassis installed with SCXI-1600 in slot 1 & SCXI-1181 in slot 2.
I have 4 more switch modules (SCXI-1160s) installed from slot 3 to 6.
Will the above has an interference when you want to control the switches?

see here:
http://forums.ni.com/ni/board/message?board.id=250&message.id=20644

How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

To sync photos from a Mac or Windows PC to your device using photo applications
Make sure you have the latest version of iTunes installed.
In iTunes, select your device's icon in the Devices list on the left.
Click the Photos tab.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
Click Apply.
To sync photos from a folder on your hard disk to your device
Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
In iTunes, select the device icon in the Devices list on the left.
Choose "Sync photos from."
Select Choose Folder from the pop-up menu and choose your main image folder.
Click Apply.

I am in hotel room. I can see my ipad is connected to AP, but it has no internet connection. But if I plug the cable directly to my PC, internet works. How to solve this?

I am in hotel room. I can see my ipad is connected to my airport express, but I have no internet connection. I tried to plug the cable directly to my PC and it worked. How to solve this?

You can change a password for an Apple ID. However, now whoever finds the iPod will know his email address and I assume that the email address is his Apple ID.
Apple ID: Changing your password
According to the terms of the iTunes Store, you have to be 13 in order to have an Apple ID.

Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router

Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router. However they all show to be connected with their corresponding bars and the ip's are all fine. Earlier today it started flucuating on and off about every 5 min making work impossible and now it seems to be completely broken (im currently on my iphone connected though its own internet) Does anyone know how or ehy this happened and how i can fix this? And to know if this originates from the router or something else entirely. Thank you!

Hi - some clarifications would help narrow down some symptoms - just what has been turning off? - has the light been solid green but the modem isn't providing wi-fi? - or is the light flashing yellow with no internet? - which can mean several things - does the light go out completey? - so if you can report on exactly what is happenening and when, maybe someone can help you - we also need to know if there any error messages along the way - we also need the types of devices involved and how they are attached - kind of like a nework map - the more info that you provide, the more answers you will get.
Regards,
Charlie -

Can I see the Ethernet signal connected to my PC on RJ-45 connector (electric form)?

Hi,
I start working on a project that needs me to know the electric characterisitics of an Ethernet signal in a specific network, and it is illegal to connect any device directly to the network (except for PC). So I was thinking can I use Labview to get this signal from RJ-45 connector and see it??
I'd appreciate any comments or thoughts that help me.
Thanks in advance,
Zeina

Dear Zeina
As Dennis mentioned previously you need an instrument to analyze the signal from the Ethernet. You can then use LabVIEW to analyze the signal, once you have connected the relevant pins of the ethernet cable you wish to view the signal through.
Using NI-VISA you can communicate to a third party device over the ethernet link and acquire a signal in LabVIEW or Measurement and Automation Explorer (MAX). The is a useful link below:
http://zone.ni.com/devzone/cda/tut/p/id/7374
Many thanks for using the NI forums and I look forward to your reply.
Kind regards
David
Applications Engineer
National Instruments UK

Aspire V3-571 not providing connected signal to monitor in power save

I recently reconfigured a number of my systems, and ended up with an Acer monitor on my Acer Aspire - the monitor had previously been used with a Dell laptop. You would think two Acer products would work better together, but it's actually slightly worse. When an external monitor is used with VGA, there are three states: the computer is driving video down the wire, the cable is connected but the computer is not sending video, and cable disconnected. The monitor can recognize these states and behave accordingly. The middle state, when the computer is either in power save mode or turned off, is the problem. In such a case, the monitor should simply blank the screen and go into its own power save mode - which it did with my Dell. With the Aspire, the monitor goes into disconnected cable mode (where it displays a moving error message forever) as soon as power save kicks in and the laptop stops sending video. This is no big deal when the laptop is off, since I can just turn off the monitor and save some electricity. But it's really annoying when the computer is on. This is especially true since this same monitor worked perfectly well with the Dell laptop. So the Acer machine is not providing a "proper" signal for some reason. My question is - does anyone know of some configuration option on the Aspire that will cause it to send a signal that the monitor will recognize as power save when the laptop is in that state - or off? Thanks.

Thanks for the reply. Good suggestion about checking for new drivers - always useful. Alas, there were none, but it did give me a chance to revisit the VESA DPMS spec that governs such things. Described well here:https://en.wikipedia.org/wiki/VESA_Display_Power_Management_Signaling I had forgotten that there were two intermediate levels (HSYNC on VSYNC off and the opposite). Obviously On and Off are seen by the monitor, with the latter interpreted as cable disconnect. I just don't seem to get one of the other states from the Aspire like I did from the Dell. The Intel HD4000 chipset in the Aspire claims to support DPMS, it just isn't working the way it worked with the Dell. That machine uses an older Intel graphics chipset. Once I had an oscilloscope in my garage and I could have looked at the pins to see what is being sent to the connector. No longer. I guess I just live with this unless a new driver shows up, or someone comes up with another solution.

Connect signal to scxi-1349 male breakout connector directly

Similar Messages

Maybe you are looking for