Connect SPDIF X-Fi Titanium Fatal1ty Pro Series ?

Hello,
I have a problem with a cable connection to SPDIF X-Fi Titanium Fatalty Pro Series.
I can not find where the entrance of the cable in the back and threw the manuals that I received while shopping.
If someone could give me a picture of a location to link SPDIF cable
Sound card. I have a cable SPDIF 2 accesses the video card.
I'll thank you for your help.

some how that thing its not working out for me.
if you havent know what i am looking after :
the spdif pins of the audio card http:// forums.creative.com/t5/Sound-Blaster/Connect-SPDIF-X-Fi-Titanium-Fatalty-Pro-Series/m-p/567247#M5878 X-Fi Titanium Fatalty Pro Series.

Similar Messages

  • Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

    I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
    I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
    Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
    Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
    I found this but Im thinking it might not work...
    http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
    Any help will be really appreciated!
    Thank You!?

    Any [email protected]

  • HDMI connection through PCI Express X-Fi Titanium Fatal1ty Pro Series and Nvidia GTX 2951

    Hello,
    I want to connect HDMI connection through PCI Express X-Fi Titanium Fatalty Pro Series and Nvidia GTX 295\but i cant tell which of the pins on the Audio Card is the Spdif.

    CRe: Mic not working (PCI Express X-Fi Titanium Fatalty Pro Series)? Hello,
    Thanks for the reply.
    The headset is connected via the 3.5mm jacks in the card.
    I believe I have it working now. I ended up having to unstall the drivers and software, reboot, install drivers and software and then mess with the settings. The only issues that I am having now is that I hear a a really high sort of feedback/hiss tone from the headphones now. To correct this I have to turn the input for the microphone down really low within the Windows 7 controls for the microphone and turn it up with Ventrilo to get the mic to work and remove the feedback/hiss.
    I believe that the issue stems from the flexjack setting. The whole flexjack thing really seems to mess with the microphone settings. I believe I choose line-in instead of microphone.
    Once I get home tonight from work, I will hopefully post the exact settings I came up with to get the mic to work.

  • No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

    I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
    Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
    However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
    I liked that very much.
    So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

    @. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

  • PCIe SB X-Fi Titanium Fatal1ty Pro Series - Crackling (when quad-SLI enabl

    Hey Everyone
    I just bought this card to upgrade from onboard but I'm having issues with crackling. It happens mostly when mousing over anything that reacts to the mouse pointer or graphically in any way. For example scrolling down a website causes major crackling and popping and it only happens when quad-SLI is enabled.
    I have 2x 9800 GX2 running in SLI on an EVGA 790i Ultra SLI motherboard Vista 64 with 4GB DDR3 RAM both graphic cards and the sound card are running on IRQ 6
    It's extremely annoying and it doesn't happen when the computer is just sitting there but as soon as stuff starts happening like videogames/videos/websites etc crackling can be heard.
    I've updated to 2.7.5 and the problem is still there, motherboard BIOS, NForce drivers and video drivers are all up to date as well.
    Is there any solution to this?

    Yeah, I have this same problem also... I have 2 9800GX2 quad sli and when it's enabled i get crackling popping and then sometimes the sound cuts out!! Only with quad sli enabled..... I also have the 790i ultra and 4gb of ddr3@700mhz..... I believe that this is related to the graphics cards and the sound card sharing IRQ 6 which also happens to me. It gives all cards on the pci-express lanes the same IRQ 6!!! The reason it doesn't happen with onboard sound is because it gives the onboard irq 22. If someone could find a way within the bios to be able to change this or if this can be changed in a future driver update it would be great!! In the 790i bios it assigns the graphics cards and soun IRQ while onboard is IRQ 0! You can't assign an irq in the bios either! Only options are PCI or reserved!!!

  • Sound lag with X-Fi Titanium Fatal1ty Pro Seri

    Hello to you all,
    I just built a new computer and the problem I have is that sound lags with WMCE in Vista. My video card is ATI 4850 (52mb) and motherboard is 790gx. The internal sound and integrated video are both disabbled. Any suggestions as to fix the sound lag while watching TV on Media Center? I have no problems with music or games with this. Thanks to all.

    Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
    "Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
    So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
    I have created a support ticket hoping that this and the other post above might bring about a driver update.
    Will keep testing and post any updates.

  • PCI Express SB X-Fi Titanium Fatal1ty Pro Series ^N

    Does anybody know if there are drivers for 64bit Vista for this card?

    got my card today, working ok on xp x64. on the package it only says vista. i dont know sure..

  • Need help getting Fatal1ty Pro Series Gaming Headset Mic to work

    greetings.
    i am using a Fatal1ty Pro Series Gaming Headset Mic along with an Audigy 2 ZS Notebook card, and i cannot for the life of me get my laptop to recognize audio coming from the mic. the mic switch on the cord is on, and the status light is lit up, and i can even hear my voice from the mic in the headphones, but the audio is not being inputted into the computer. i'm using winxp pro and have played around with all the audio settings in control panel with no luck. any suggestions? i thank you in advance for your time and consideration. take care.
    regards,
    jps

    Headsets or microphones with a USB connection cannot be connected to the input connections on a sound card directly. Instead, they must be connected to a USB port on a PC.
    They are treated as a separate audio device by Windows. They will be listed as a separate audio device in Device Manager as well as in Windows Multimedia panel. To adjust the volume of the headset or the microphone, use Windows Volume Control.

  • Gigaworks S750 cables for the X-Fi Titanium Fatal1ty Pro Card?

    Hey guys,
    I got a nice Gigaworks S750 7.1 speaker system and want to use it with my new X-Fi Titanium Fatal1ty Pro card. The Fatal1ty pro has analog outputs for a 7.1 sound system, but the Gigaworks doesn't have the same layout. Can anyone help me find the cables I need to get this setup running?

    Hi,
    There are 4 Line Outs on the X-Fi Titanium Fatal1ty Pro card.
    Line Out 1 jack - Connects to the Front Left and Front Right inputs
    Line Out 2 jack - Connects to the Side Left and Side Right inputs
    Line Out 3 jack - Connects to the Front Center and Subwoofer inputs
    Line Out 4 jack - Connects to the Rear Left and Rear Right inputs
    You might want to refer to the user manual of the sound card and speakers system for more information.
    You can still utilize the suppiled 7.1 cable. Just leave out the grey connector (side speakers) and use a single 3.5mm cable to hook up both ends.

  • Need help on Inspire t 6200 and PCIE XFI titanium Fatality pro series

    Hello All,
    I need help on this.
    I have PCIE X-FI Titanium Fatality Pro Series. and I just bought 5. Speakers Inspire t 6200.
    However, I have some problems.
    1. In Mass Effect or Other game Or dvd I cant make the center work. It means you can hear the music and background sound clearly but no Voice at all that ussualy come from center channel.
    2I Tested over audio controler from the disk. When I put 5. speaker configuration, the sound is coming from center and left channel for left channel and same thing for the other side. However, When the test is trying to test the center and rear speake, the sound are muffled.
    3. Is X FI only for Headset only or you can use Pc Speaker ? And how to configuration for Inspire t6200 with my sound card.
    I am using Windows xp sp 3
    4g Ram
    Pentium dual core Extreme?
    Thank You

    AnyOne?

  • MSI x58 PRO-E SLI+Creative X-Fi Titanium Fatal1ty Pro

    Im thinking of buying a Creative X-Fi Titanium Fatal1ty Pro for some better sound, problem is that I cant see if this is gonna fit in the top PCI-E slot because of the cooling block there.
    Does anyone know if this will fit or not?
    here is a pic of my current setup:
    http://twitpic.com/1zvxnz

     You asked if it would fit the other slot and I said it would, if the heatsink does in fact prevent you from using that slot then you can use any other available PCIe slot. A 1x PCIe card will work in any PCIe slot no matter what size the slot is.
     I took a look at the pictures shot from an angle at MSI website and it does look as if it may not fit there. I also noticed that on the 1156 MB that the same HS on them have very short fins in line with that slot, makes me wonder why the 1366 MB HS is not like that.
     I assume you don't have or can't borrow a card from family or friend to just test for fit in that slot?

  • Titanium Fatal1ty Pro product numbers?

    I've discovered this, and I am honestly quite confused.
    On Creative's official store, the Titanium Fatal1ty Pro has the SKU 70SB088600002 . Looking at my own local stores, I see a very similar code (70SB088600000), where the only difference is the last digit being 0 instead of 2. That's not all though. Some retailers also have the quite different code of 30SB088600000 . That's three SKUs, apparently for the same product. Nothing indicates that either is the champion edition (the package including a front bay). Do these differ somehow?

    You can use the product page on the online store as a reference to make sure that you are not missing anything. If you are buying from an online reseller, you might want to sure they are authorised & trustworthy retailers.

  • Question Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.

    LQuestion Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.0 Hello All,
    I need help on this.
    I have PCIE X-FI Titanium Fatality Pro Series. and I just bought 5. Speakers Inspire t 6200.
    However, I have some problems.
    . In Mass Effect or Other game Or dvd I cant make the center work. It means you can hear the music and background sound clearly but no Voice at all that ussualy come from center channel.
    2I Tested over audio controler from the disk. When I put 5. speaker configuration, the sound is coming from center and left channel for left channel and same thing for the other side. However, When the test is trying to test the center and rear speake, the sound are muffled.
    3. Is X FI only for Headset only or you can use Pc Speaker ? And how to configuration for Inspire t6200 with my sound card.
    Thank You

    AnyOne?

  • Titanium Fatal1ty Pro SPDIF game problem

    (Titanium Fatalty Pro SPDIF game problem hi all,
    sorry if this issue reported in the past i but i could not get any answer on any relati've posts, the terminology was so complicated
    i buy?a new pc with a Titanium Fatalty Pro sound card, i use Vista sp2 x64, the sound card is connected to my external amplifier with SPDIF out in order to get surround sound for my movies and my games and here is my problem
    any movies format with surround sound play perfect with out any problem any kind of movie DVD, dvix, mkv?files?etc
    but non of the games i play?use the surround system, why is that? is any?kind of special settings needed to be done? how is possible to get surround to movies and not to the games?
    thanks you all for your time ?

    ,Re: Titanium Fatalty Pro SPDIF game problem? this is really coincidence - I just posted on the very same topic 5 minutes ago.
    for games just go to the Console Entertainment mode > Encoder > Dolby Digital. Although this is not documented I believe what happens is that the sound card encodes the 6 digital channels onto Dolby Digital mode and transfers this over SPDIF. Kok-Choy actually recommend using the standard analogue cables (and he has a point as you are actually upcoding an existing game signal onto Dolby so that your digital receiver can then decode this down to 6 channels - seems a pretty useless overhead)
    for video - I am curious to know what you do - I can either get 96/24 bits on the display of my z5500 with a direct signal but the z5500 receiver then tells me that this signal is only in dolby ProLogic II (and not DD or DTS). As alternati've I use again the encoder and have to select for EACH FILM WHAT IS BEST DOLBY DIGITAL OR DTS. Pls explain what settings you use.
    thanks

  • X-Fi Titanium Fatal1ty Champion Series stopped working

    6X-Fi Titanium Fatalty Champion Series stopped working Hey guys!
    After a totaly normal reboot, my X-Fi Titanium Fatalty Pro/Champion suddenly stopped working....
    No sound and the led ont the side of the card also is black(same for the front panel) while the optical out still seems to be working.
    Its still displayed as Creative sb xfi in the device manager but the main output device is shown as Internal AUX-socket in the sound options dialog (while the spdif-out seems to be ok)
    <a rel="nofollow" target="_blank" href="http://i49.tinypic.com/332slj.png"]http://i49.tinypic.com/332slj.png[/url]
    <a rel="nofollow" target="_blank" href="http://de.tinypic.com">[img"]http://i49.tinypic.com/332slj.png" width="639[/img] alt="Image and video hosting by TinyPic" height="399">[/url]
    Reinstalled everything about 5 times.....doesnt work

    Still no solution... but the spdif out/in realy seems to work....

Maybe you are looking for