Connect speaker 5.1 on Qosmio X500-10W

Hi,
How to connect a speaker system 5.1 (3 plugs: black, yellow and green) on a Qosmio X500-10W?
1- With the S/P DIF optic plug of Qosmio?
2- With an extern sound card?
Thank you for your reply
Regards

You should be able to use the HDMI port or DisplayPort. I don't think it will have SPDIF.

Similar Messages

Qosmio X500-10W - Can I replace the HDD with another one?

Hello
I have a Qosmio X500-10W with two HDD Toshiba MK5055GSX 500GB 5400RPM 8MB ??SATA II but is one of hs so I wonder if I can be replaced by a more powerful style HDD 750GB 7200tr / min 16MB Toshiba course?
merci

Hey,
Your question is a little bit hard to understand but I think you want to replace the HDD with another (faster) model, right?
Well, thats no problem. HDDs with 7200rpm will work, they are a little bit louder but they are faster so if you need more performance no problem.
Also 750GB or more is no problem because SATA interface is not capacity limited. Theoretically 1TB or more should also work.
Anyway, you can buy the 750GB you mentioned it will work. :)

Qosmio X500 - How to enable recording from internal speaker?

How do you enable recording from internal speaker on Qosmio X500?
Is this possible because from Control Panel / Sound / Recording only microphone can be seen.
Any help appreciated.
Thank you.

Hi
Do you want to record the sound that will be played through the internal speakers?
Therefore you can use the Windows Sound Recorder or other tools like Audacity. Latter is a very nice freeware tool. :)

Qosmio X500: Lan/Internet connection get lost after period of time

Hi all,.
I got the qosmio x500 for about half a year now...
I got this problem where after about 5 hours or less the lan/internet connection get lost.
I disabled the wireless connection and is using only the wired connnection now.
When it get disconnected... all devices seems to work seemlessly, no problem can be found. I checked the win7 network adaptor --and it seems to be connected properly.
I haven't got a slightest idea how to fix that.... Only a reset of the system and reloading the os results with a valid connection.
It is even stranger,. When using it for a piriod of time (listeding to audio streams from the web)... when getting back to the machine the audio connection seems to work properly.... but when trying to access other sites, or other machines in the homegroup, or network (under explorer). It result faulty.
Please guide me somehow how to fix the issue, it is bugging me a lot (all these resets to the machine probably doesn't do it any good as well).
thanks in advance,.

Hi,
It could be the energy saving feature of your network card.
Right click Network Icon on the status bar, choose 'Open Network Center and Sharing', Click on 'Connection', Click on 'Properties' (low left button), you'll see the tab with your Network Properties. Click 'Configure' (Upper right button), choose 'Power Management' (last right tab).
Uncheck 'Allow computer to shut down this device to save energy'. Probably your problem will now be solved.
If the names I write aren't exactly right, I'm on a French language computer so my translations can be slightly wrong.
Bye,
Ton
Message was edited by: Tonio78370

Qosmio X500 - Cannot connect to by mobile phone via BT

Hi,
i have a Toshiba Qosmio X500, Windows 7 Home Premiun 64 bit.
The problem is when i use the bluetooth and try to send a file to my phone it wont work.
It searches and finds the device but wont connect to it.
I've read that there is a link for an upgrade that fixes this problem.
If anyone knows another way to fix this or has the link your help would be greatly appreaciated!!

>ive tried updating the drivers but it says i have the latest drivers
You have to remove it firstly from the system before you would install the Toshiba Bluetooth stack again!!!
Please check this!
After that enable the BT properly, search for the BT device, pair both devices (notebook & mobile phone) using an 4 digit code.
Should work

Can I add a second hard drive on Qosmio X500-12Q?

Hi,
i'd like to know if its possible to add a second hard drive to the X500-12Q ?
i suppose the space is available but i'd like to know if the connector is here & everything
so i could just open the enclosure and plug it in.
thanks

Hi jeandujardin,
I dont have Qosmio X500 but generally speaking its no problem to exchange the internal HDD with a SSD but I dont know if the model has 2 SATA connectors.
If you are not sure ask the salesman if its possible to install a second HDD or SSD.
SSDs are no problem because they have the same SATA interface as normal HDDs.

QOSMIO X500-12D - webcam, bluetooth and fingerprint disconnection issues

Hello,
I still got no solution for this problem. I already did a clean install of Win 7 x64 but still no luck. The devices still keeping disconnecting and I have to reboot to resolve. (this is bad since I normaly using a bluetooth keyboard)
Further this Problem seems not only to occour if system goes 'idle' since my bluetooth keyboard was disconnected during typing. (whatever 'idle' means).
Sometimes I was able to recover at least the Bluetooth connection by turn it off and on again within the Toshiba Bluetooth Stack, sometimes with the HW switch (which also deactivates the WLAN) and sometimes only a reboot helped.
It seems that all three devices (Bluetooth, Webcam, Fingerprintsensor) are connected to the same integrated USB root hub within the system.
After my last test, everything was working before I left the system during a nightly copy operation of a 'few' gig, I come back after ~4 hours and all devices were disconnected (HW not installed) --> I checked in the device manager (see [http://support.microsoft.com/kb/241257] to show devices which are not connected and in the computermanagement right click device manager -> View -> Show hidden devices) all 3 devices shown as 'not connected'.
I already opened a case at support and they told me to update the bios. (when I opened the call the tests were done with the latest bios available)
Nevertheless, I also had a small talk with the support and they told me to restore the system from the recovery DVD's and check if the problem persists after the restore of the 'certified' image (drivers and so on). If it still persists they will do a HW repair. (change mainboard or whatever)
*AGAIN... is there still NO solution out there? I have searched the web and found many people with the same issues. (X500 owners and others)*
_What did i tried:_
- different hotfixes as described at [http://aps2.toshiba-tro.de/kb0/TSB0402UQ0001R01.htm] and [http://aps2.toshiba-tro.de/kb0/FAQ0402UC0001R01.htm] ([http://support.microsoft.com/kb/978258])
- right now I am using [http://support.microsoft.com/kb/981214] since the build numbers of the files are higher than in the hotfix mentioned above and therefor this hotfix should also resolve the problem described in [http://support.microsoft.com/kb/978258]. (and I am using an USB audio device)
- I also tried to disable different things of the power management (e.g. disabled usb selective suspending)
Modell QOSMIO X500-12D
Partnumber PQX33E-030009GR
BS-Version Microsoft Windows 7 Ultimate 6.1.7600 x64
BIOS-Version V2.60
CPU Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz
RAM 4096MB RAM {color:#ff0000}(<- Toshiba Tools reports wrong RAM size, 6GB installed)
{color}HD Size 499,685,253,120 [Byte] 465.368 [GB]
Video NVIDIA GeForce GTS 360M Version=8.17.12.5896
Screen Resolution 1920 x 1080

HI,
It seems that I have found a solution for this problem.
If you have read my first post exactly you should have read that i already disabled the selective USB suspend.
I have connected 2 external USB hubs which are powered by an AC/DC adapter. On this USB hubs I have connected varios USB devices...7.1 USB Headset, external HDD's, PDA, Card Reader, PKI device, USB Sticks, etc.
Nevertheless, I also disabled the the Powermanagement settings on all devices which were involved and where it is possible.
To do this goto the device manager --> right click --> View --> show devices by connection.
Now locate your bluetooth, webcam and fingerprint device. (be carefull names might be different because of different drivers!)
Should be under ACPI x64-based PC --> PCI-Bus --> Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller --> {color:#ff0000}*USB-Root-Hub*{color} --> {color:#ff0000}*Generic USB Hub*{color} -->
There you should find all integrated devices which are troublemaker:
* {color:#ff0000}*AuthenTec Inc. AES2550*{color}
* Bluetooth USB Controller-7 from TOSHIBA
* USB-Webcam
Now double click every device in this 'chain' and locate the powermanagement TAB. (Please note that NOT all devices in this chain do have a powermanagement tab and cannot be configured....that's ok)
On the power management tab uncheck 'Allow the computer to turn off this device to save power' and click OK.
I have done this for all devices which are {color:#ff0000}*marked red in the chain above*{color}. (_I also deactivated the USB selective suspend in the used powermanagement plan!)_
It seems to work now....until now no more bluetooth problem or devices which were gone. It might be that it is enough to disable the Power saving settings only on one or two devices, but right now i had no time to test.
Please also keep in mind that I am using the latest Intel Chipset driver, latest Toshiba drivers and installed the Microsoft hotfixes described in my first post in this thread!
It would be very nice if some people can try and post here if it works!
Regards

No display function on Qosmio X500-13R

Hi everyone!
I tried to connect a projektor with HDMI cable to my laptop.
My problem is: I had picture only on my projektor.I tried to set it up,but i have do a failure.I dont know what.My laptop display doesn't work anymore.I reinstalled the windows with my projektor.
Now i can see nothing on my laptop and on my projektor too.
How can i solve this problem?
Thx.
p.s.: sorry for my bad english,
I have Toshiba Qosmio x500-13r

Hi have a look at the threads about " no HDMI output" it may help you. There is alot of advice that could solve your projector problem.

Qosmio X500-014 (LED Backlit Display)

Hello all, quick question here.
Just picked up my new Qosmio X500-014, although I'm quite satisfied with this machine I wish this particular model had the LED Backlit Display for the keypad.
Would it be possible to buy the correct Backlit keypad and swap it for the one in my mcahine? Or are there other components required as well?
Thanks in advance.

Thanks for reply Dr.Lamp.
I did take the time to call Toshiba today and was told that I have a canadian model with multilingual keypad no backlighting. (Qosmio X500-014 Mfr. Part Number: PQX33C-01400N). They also told me that they do not carry nor sell parts for these laptops, any advice as to weather a backlit keypad would be compatible with my model is inconclusive. They did however give me the number to there parts supplier:
National Parts Depot (1-800-524-8338)
Speaking with a Rep at National Parts Depot I was told they do not carry parts for the canadian versions, only the US versions. They do not have any reference to the X500 version only the X505 version.
Now I`m confused, is the X500 canadian only and the X505 the US variant? This may explain why all the models I see here in Canada have the same multilingual keypad with no lighting? (not sure)
So I decided to take things a step further and gave them the part number to a US model that has the English only LED backlit keypad . (Qosmio X505-Q850 Mfr. Part Number: PQX33U-00L00H). NPD won`t give me the part numbers for the keypad, but does have availability for $90.00 US funds, no guarantee that the LED lighting will work with my model number but should physically fit into my X500.
So, I guess I need to find the parts supplier for Canada and see what they have to say, if all else fails I may just take the $90 dollar gamble on the keypad for the X505 and see what happens, worst case I can always resell it on Ebay.
I`ll keep this thread updated with any findings, thanks.

Qosmio X500: power adapter stopped working for no reason

Hi,
Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
The first thing is that my power adapter stopped working for no reason,
So i bought a new one, but it always made some noise when the laptop was fully charged.
I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
Then i have one dead pixel in the middle of my screen, no problem for me.
Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
Thanks in advance.

> The first thing is that my power adapter stopped working for no reason,
> So i bought a new one, but it always made some noise when the laptop was fully charged.
I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
> Then i have one dead pixel in the middle of my screen, no problem for me.
I found a info about such issues:
+Information on screen technology and pixel failure tolerance for LCD displays
+http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
> Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

Cant find Realtek Wireless LAN Driver download for my Qosmio X500

Hi,
i just reinstalled windows on my Toshiba Qosmio X500-140 and installed all drivers i need.
But i couldnt find the Realtek Wireless LAN driver in the download list.
I just found the LAN Driver. So i just can connect to the internet with LAN cable.
Please some help
With kind regards.

Check please Toshiba WLAN portal on http://aps2.toshiba-tro.de/wlan/
I hope you can find it there.

Qosmio X500-110 - Webcam failed to initialize

Hi
I have a Qosmio x500-110. Bought brand new out of the box and I havnt changed nothing.
It displays this error message after startup "webcamera failed to initialize...restart application or computer" and the webcam stops working. Also when this happens the finger print reader and bluetooth devices also stop working. The finger print say "failed to connect to sensor". As soon as you restart the computer it works fine. Then again it may go anytime.
I dont know wat is causing this prblem. I have downloaded and reinstalled the drivers also (Windows 7 64bit) and the softwares for the same but dosnt help.

Hi
So you have already reinstalled the webcam driver and still running preinstalled OS without any 3rd party applications and this error occurs?
Well, I think in this case your only chance is the authorized service provider. The technicians should check your notebook, maybe its a hardware problem or something else. Just contact the guys and explain the situation. They will help you as best as possible.
Good luck! :)

Qosmio X500-110 - Slow start up

hi,
I bought new Qosmio X500-110 two weeks ago. In third day, I realized that HDDs are too slow. After tnb computer changed this one. Second Qosmio is too slow. Especially start-up time is average 10 minutes. Also right speaker was scratchy. at the moment, it is in technical service again and again it may be changed.
BIOS is 1.40
Don't work sleep mode. This problem is general. everbody says this problem.
HOW MUCH IS START-UP TIME ON YOUR QOSMIO X500's???

Hi
Its not tricky to reduce the start up time from Windows:
-Defragment your HDDs
-Uninstall all programs that you dont need
-Run CCleaner to clean Windows registry
-Disable all startup programs that you dont need in msconfig
-etc.
If you search with Google and here in forum you will find enough threads where you can find solutions for this.

Qosmio X500 - Very low sound

Hello everyone!
I have a problem with my new Qosmio X500. Its speakers produce a very low sound, especially when I'm using Guitar Pro. Please, tell me, if it can be improved somehow. Thanks a lot!

Have you tried adjusting the speaker enhancements? This Increased the volume quite a bit for me.
Open "SOUND" from the control panel, on the "Playback" tab double click "Speakers" This will bring up the "Speaker Properties" box. Go to the enhancements Tab. "Loudness Equalization" made the biggest increase for me.
Mark

Poor wireless performance on Qosmio X500-134

I just bought a Toshiba Qosmio x500-134 and there's one thing that bothers me. The wireless conection is very poor.
Ii can say I am very disapointed with that. I had a x205-sli1 model before and the wireless connection was top.
Why in x500 is it so poor?

there are no special wlan settings.i'm using a home network,belkin N+ router,the signal showed is maxximum but runing a ping test there are alot of lost packages(time out).keeping another laptop in same spot to see if there is a diffrence on another machine,no problems on the other one.thats why i'm saying there is a poor wireless conectivity,maybe the wireless card is ok then must be the receiver on it very poor.

Connect speaker 5.1 on Qosmio X500-10W

Similar Messages

Maybe you are looking for