Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Similar Messages

'Destination 'orgFilterService' either does not exist or the destination has no channels defined

Hi,
My code connects to remote object using the destination id as 'orgFilterService'. This was working fine, but all of a sudden it has started giving the below mentioned fault message.
fault--> [MessagingError message='Destination 'orgFilterService' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']...detail : Couldn't establish a connection to 'orgFilterService'...errorID : 0...faultCode : InvokeFailed
I am creating the build in Flash builder, and it works fine in my local machine when run from flash builder; whereas, when moved to a UNIX box, it starts giving this error. Again, this was working fine in the UNIX box also before this build.
I have verified the entries in remoting-config and servivecs config - both are fine, and are untouched since from the last time it was working. Also, it is able to connect to other destination id, but not to this!!
Entry in remoting-config:
    <default-channels>
        <channel ref="my-amf"/>
    </default-channels>
<destination id="orgFilterService">
<properties>
   <source>com.jpmorganchase.pfitr.boreport.DrillOrganizationReport</source>
</properties>
</destination>
Entry in services-config:
        <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
Changing the build doesnt resolve this error.Please let me know if any kind of refresh needs to be done or any temp files/cache needs to be removed.
Thanks,
Vipul Sharma

Ok, I'll get that a shot. I know the docs talk about using the project creation wizard, but I really would like to be able to just drop in Blaze as some jars and config files. So doing this by hand is my preferred method. Is there any docs talking about setting up Flex Builder projects to work with Blaze? Like the way you're telling me or is what you're showing me it. Because up to this point I've just added stuff to web.xml, create /flex/configs.xml files, and now this compiler param. I have not replaced the {server.context} etc tokens or anything in the configs. Do I need to change that? I saw some posts talking about using full paths instead of tokens, but that would make it a pain to deploy. However when I tried to set those like the post said, the compiler complained about setting those params twice. I'm guessing that means they're already set? However I would think those url prams would need to be relative so I can move my application from localhost to my domain.com server, right?

VMM 2012 R2 - Create or Update Run As Account Failure: The specified directory service attribute or value does not exist

VMM 2012R2 UR4 - Version 3.2.7768.0
Not sure when this started happening since I haven't had to update or create a new RunAs account in VMM in some time, but every time I do, either through the console or through PowerShell it throws an error about The specified directory service attribute
or value does not exist. The VMM Service account is the same as it always has been, and other than this issue everything with VMM is working fine. The full text of the error message is below.
I am hoping someone has some ideas because I don't have any more at this point.
------------------- Error Report -------------------
Error report created 12/22/2014 9:43:33 AM
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7768.0
P3(assemblyName)=Microsoft.Cryptography.DKM.dll
P4(assemblyVer)=3.2.7510.0
P5(methodName)=Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys
P6(exceptionType)=System.Runtime.InteropServices.COMException
P7(callstackHash)=d0d2
SCVMM Version=3.2.7768.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7768.0
Executable Name=vmmservice.exe
Executable Version=3.2.7768.0
Base Exception Target Site=140712994535888
Base Exception Assembly name=System.DirectoryServices.dll
Base Exception Method Name=System.DirectoryServices.DirectoryEntry.Bind
Exception Message=The specified directory service attribute or value does not exist.
EIP=0x00007ffa67d15bf8
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.Runtime.InteropServices.COMException (0x8007200A): The specified directory service attribute or value does not exist.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_IsContainer()
   at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
   at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
   at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
   at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
   at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
   at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
--------------- exception.StackTrace ---------------
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_IsContainer()
   at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
   at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
   at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
   at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
   at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
   at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
   at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
   at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
   at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
   at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
   at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
   at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
   at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
    Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
    Version=4.0.30319.34014
    BuildType=retail
    Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
    Version=4.0.30319.34003
    BuildType=retail
    Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
    Version=4.0.30319.34230
    BuildType=retail
    Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
    Version=4.0.30319.33440
    Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
    Version=4.0.30319.34230
    BuildType=retail
    Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
    Version=6.3.9600.17090
    BuildType=retail
    Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
    Version=4.0.30319.34230
    BuildType=retail
    Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
    Version=6.3.9600.16384
    BuildType=retail
    Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
    Version=3.2.7768.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
    Version=3.2.7672.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7768.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
    Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
    Version=3.2.7510.0
    BuildType=retail
    Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    Version=4.0.30319.33440
    Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
    Version=4.0.30319.33440
    BuildType=retail
    Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 4356 (0x1104)
Managed Thread ID = 18
Native Thread ID = 5520 (0x1590)
MCITP | VCP4 | VCP5

Hi,
You want userPrincipalName, not userPrincipleName.
http://msdn.microsoft.com/en-us/library/windows/desktop/ms680857%28v=vs.85%29.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Yammer used for page comments in SharePoint Online, initially says "The feed you've requested does not exist"

I am trying to use Yammer for a per-page comment platform. This seems to require placing a Yammer embed in each page and configuring the embed to use Open-Graph.
Why does the feed initially say "The feed you've requested does not exist." for every new page? The default should read "There are no messages
in this feed."
My embed code looks like this:
<div id="embedded-feed" style="height:400px;width:500px;"></div>
<script type="text/javascript" src="https://assets.yammer.com/assets/platform_embed.js"></script>
<script type="text/javascript"> yam.connect.embedFeed({
container: "#embedded-feed"
, network: "myyammernetwork.com"
, feedType: "open-graph"
, config: {
use_sso: false
, showOpenGraphPreview: false
, header: false
, footer: false
, promptText: "Comment on this page..."
, objectProperties: { url: window.location.href, type: "page" }
</script>
You can see at the following link, following the instructions, it results in "there are no messages in this feed."
https://support.office.com/en-us/article/Use-Yammer-Embed-instead-of-the-Yammer-app-for-SharePoint-2013-and-SharePoint-Online-812c752b-3586-4f67-accb-49cd3724dcc1?ui=en-US&rs=en-US&ad=US#CommentFeed

Hi,
which is your environment, SharePoint Server 2013 or SharePoint Online?
For Yammer Embed to work, your SharePoint environment must satisfy the following prerequisites:
Your organization should have an active Yammer network (for example: www.yammer.com/contoso.com)
Your SharePoint farm admin should choose Yammer.com service as the default enterprise social collaboration platform. Set this option in the SharePoint admin center for SharePoint Online and in SharePoint Central Administration for on-premises
SharePoint Server 2013. Choose the yammer.com service and wait for 30 minutes before moving on to the next step.
For more information,please refer to the blog:
https://support.office.com/en-us/article/Embed-a-Yammer-feed-into-a-SharePoint-site-4817d2fa-50f6-4f25-88a0-a312745768d4
http://blogs.msdn.com/b/chhopkin/archive/2013/11/20/yammer-embed-and-sharepoint-2013.aspx
https://technet.microsoft.com/library/dn270535?f=255&MSPPError=-2147217396
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
It will help to know exactly what model iMac and exactly what make/model TV you have.
Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output. Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs. Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

"A valid repository does not exist at the specified connection" when connecting

Hi all,
I'm using ODI 11g and Oracle Database 11g EE.
I've installed ODI without any errors, and chose to skip repository configuration during installation.
I created the Master and Work Repositories with the RCU that was provided in the same media pack as the ODI installation files.
After starting ODI, clicking "Connect To Repository..." and inputting the correct credentials I get the following error:
A valid repository does not exist at the specified connection...
http://pastie.org/pastes/8081847/text?key=grna09suyra4w0vgitbxiw
Has anyone had this error before, can anyone help?
Thanks!
Josh.

Josh,
Looks like the RCU did not create the repository in the intended schema for some reason. you can check the schema for the ODI tables (SNP_*) presence.

The file required for contribute compatibility does not exist on the server

Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
Simon

Did you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Installation Fails :/ yxefkoe does not exist on the 'localhost' host

Hi Guys,
I am trying to install NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System on my pc. But I`m getting following error.
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
Here is the dump from the log file.
WARNING 2010-10-24 17:52:45.781
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\yxefkoe).
WARNING 2010-10-24 17:52:45.781
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
ERROR 2010-10-24 17:52:45.781
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
ERROR 2010-10-24 17:52:45.781
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.).
I have installed the Microsoft Loopback network adapter. And C:\WINDOWS\system32\drivers\etc\hosts file contains following entries.
127.0.0.1 localhost
10.10.0.10 anuja
10.10.0.10 being the address given to the Loopback connection and anuja is the hostname.
Please help me to solve this issue.
Thanks!

Thank you PR Srinivas and Khaiser.
Actually I wish to explain how I solved the problem. I went to the key through the registry path. But saw that there was the folder present in the path but it was blank.
So I right clicked on the folder went to Permission. I tried giving Full Control Permission for 'System' user name which did not solve the problem.
Hence in the Permission option of yxefkoe registry key I clicked on Add. In the 'Select Groups or User' popup window I clicked on 'Advanced' option and then clicked on 'Find Now'. I selected the user name which I use to log in to windows and applied the changes.
After all these steps I found entries in the registry folder 'yxefkoe'. I right clicked on the yxefkoe folder and went to Permissions - > Gave Full Control to the newly added user name.
And then the problem was solved.
So I guess when you should find two users in the Permissions option on the yxefkoe folder.
1. System
2. User name which u use to log into windows. -- > It is displayed like this --> User_Name(Hostname/User_Name)
Correct me if i am incorrect here.
Thanks a lot for the help!

"WEB_0ADHOC" does not exist in the master system

I inserted a query into report designer and made a few changes (font/adding columns, custom text) and when i'm trying to launch it in Portal ...this is the error msg i get
The initial exception that caused the request to fail, was:
The Web template "WEB_0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "WEB_0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:80)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:83)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:126)
In the web application designer, i tried to see if the WEB_0ADHOC is available or not ... this is the msg i get:
Diagnosis
You have attempted to open query ! from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.
i even checked in the IMG setting to see if this is the default template for enterprise reporting and it is.
How do I make it available in the system.
Message was edited by:
voodi
Message was edited by:
voodi

Hello,
Someone changed the default templates in your system. WEB_0ADHOC is wrong.
Delete the entries and restart your java server (because of cache). This will reset the changes to default. All templates for new runtime must be visible in the transaction SE38, program RS_TEMPLATE_MAINTAIN_70. source code must begin with <bi:bisp ...
Regards, Karol
SAP NetWeaver BI, Development

The name "Folder" does not exist in the namespace

I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks Hal

Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

The Table.Column does not exist on the rowset

Hi I have the following issue:
I keep getting a message in Power BI Designer Preview that states:
The 'collections.Name' column does not exist in the rowset.
I have a MySQL DB connected to an Access DB and then I've created and saved a query within Access.
Then I'm bringig in this query into Power BI Designer. To note, I can see my 1 row of data in the Query view of Power BI Designer but my error appears when I goto report after it tries to load the data into the model
the MySQL Statement looks like this:
SELECT orders.TRUNKSHOWID,
orders.ID,
orders.DATEENTERED,
orders_products.NUMBER,
orders_products.SIZE,
orders_products.DESCRIPTION,
products_categories.NAME AS Cat1,
products_categories_1.NAME AS Cat2,
collections.NAME,
Releases.Name,
orders_products.PRICE,
orders_products.DISCOUNT,
orders_products.TYPE,
products.WHOLESALECOST,
orders.FIRSTNAME,
orders.LASTNAME,
orders.ADDRESS,
orders.ADDRESS2,
orders.CITY,
orders.STATE,
orders.ZIP,
orders.COUNTY,
orders.COUNTRY,
orders.PHONE,
orders.EMAIL,
orders.BILL_FIRSTNAME,
orders.BILL_LASTNAME,
orders.BILL_ADDRESS,
orders.BILL_ADDRESS2,
orders.BILL_CITY,
orders.BILL_STATE,
orders.BILL_ZIP,
orders.BILL_COUNTRY,
trunkshows.TRUNKKEEPERID
FROM trunkshows
INNER JOIN (Releases
INNER JOIN ((((products
INNER JOIN (orders_products
INNER JOIN orders ON orders_products.ORDERID = orders.ID) ON products.ID = orders_products.PRODUCTID)
INNER JOIN products_categories ON products.CATEGORYID = products_categories.ID)
INNER JOIN products_categories AS products_categories_1 ON products.CATEGORYID2 = products_categories_1.ID)
INNER JOIN collections ON products.COLLECTIONSID = collections.ID) ON Releases.ID = products.ReleasesID) ON trunkshows.ID = orders.TRUNKSHOWID

Hi
When you create a workbook in DEV, you will be assigning a query for that workbook
When you transport workbook from DEV to QA,the assigned workbook comes along with it
When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
Regards
N Ganesh

Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.

Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

Similar Messages

Maybe you are looking for