Connect sproxy of CRM to two systems XI

Hi gurus,
I comment the question that considers to us.
We have a system CRM connected to XI 3.0 in the Tcode sproxy. We have a research laboratory where we have installed a system PI 7.0.
We want to connect that system CRM to systems XI both by means of the Tcode sproxy.
That is possible? Is there documentation to do it?
Thanks

hi,
>>>>That is possible? Is there documentation to do it?
no in standard this is not possible
Regards,
michal

Similar Messages

One ECC Connected to multiple CRM systems

Hello,
We have a scenario where we have single R/3 system (ECC) connected to multiple CRM systems. I would be obliged if someone can send me some documentation on tht.
Also if we are creating an order in ECC, two queues are generated which I think is wrong. Can someone give me some advice on this.
Thanks & Regards
Priyanka

Hello Pratik,
I would define two different systems in ECC. In such a case, if say I create one material in R/3 (ECC) then should it generate two diffrent queues for flow to CRM.
Also if say the CRM Release etc for the two systems connected to one R/3 are not the same, then how do i take care of the entries in the ECC Config tables for replication i.e CRMFILTAB, CRMCONSUM, CRMPAROLTP etc.
And how does the ECC system identify what settings it has to take for what CRM system and what queues have to be generated? What are the queues to be registered in CRM and ECC in such a case.
Would be obliged if you can give me a more detailed advice.
Rgds
Priyanka

Step by Step how we can connect SAP CRM to External system..

Hi Experts,
I want to know the informations of how we can connect sap CRM to External system, and what are the settings we have to do ,to enable XIF adapter..
This is very imp requirement kindly give support.., how we can connect to other system..through XIF Adapter..??
IS it possible to create ZBAPI in SAP CRM..?
Thankz in Advance
Regards
J Sarathi

Hi,
- Xif adapters and service process the BDOC messages.
- adapters for inbound and outbounfd processing.
-it will forward the messages from the inbound queues to the control component.
-BDOC is a business document where the flow of data to and from the CRM system takes place.
-Bdoc is a container that contain business data
- it describes the hierarchial structure of the business data.
-you can also create custom specific BDOC types,
-BDOC's as a data container to process business objects as one unit and this avoid having to transport several individual tables.
Bdoc types are found in BDOC repositry.
Bdoc types have two part
Header- consist of one single segment so-caooed control segment
Body - consist of one or more data segment
Idoc having three types of data:
control record
Data record
status record
hope it will useful.
thanks
Hemant ghiya

Using transaction launcher to connect CRM 7.0 to a CRM 6.0 system

Hello Experts,
We are considering integrating two IC Web client applications one on CRM 6.0 and the other on CRM 7.0 as transition step before the two systems are fully integrated.
We would like to create a transaction launcher transaction in CRM 7.0 that takes the user to Interaction History bsp page in CRM 6.0. Is there a simple way to do this using transaction launcher?
Best Regards,
Tom Halloran

Hi,
You can use the transaction launcher and the transaction launcher profile, which is part of the IC WebClient profile, to start SAP GUI for HTML transactions via the Internet Transaction Server (ITS) from both Enterprise R/3, SAP CRM transactions from SAP CRM. Starting from CRM 4.0 Add-on, you can use transaction launcher to launch URL and front-office based transactions also.
Agents have access to launch transactions from the IC WebClient navigation bar.
In your case you can include the link for you CRM 6.0 from CRM 7.0 can be grouped under workcenter link group or direct link group of a navbarprofile.
regards,
Muralidhar Prasad.C

Can we connect one R/3 to two BW systems and extract data?

Can we connect one R/3 to two BW systems and extract data succesfully ? kindly through light on this issue.
Thanks and regards.
Ankush Shejul

Of course you can.
Just have to have the RFC destinations in place and use the
CALL FUNCTION '....' DESTINATION '....'
commands in ABAP, check out the ABAP forums for more info.

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

Cofig guide for connecting CRM and R3 system

Can anyone provide full cofiguration guide for connecting CRM and R3 system from end to end.
also complete information about bdocs settings in Adminstration console.
regards,
Sunil

Hi
Please follow the link
http://help.sap.com/saap/sap_bp/CRM_701_XX/Html/index.htm
then go to the following hyperlinks
B01: CRM Generation
B09: CRM Customizing Replication
C03: CRM Master Data Replication
Meticulous follow these three documents then you will be able to connect CRM AND ECC systems and will be able to perdorm initial load of customers, materials etc
please let me know if you have any issues
thanks
Ananda kumar karri

Connect two systems (CTS) after independent upgrade

Hello
I've installed two Netweavers with the same types and component.
After that
1) I configured a transport route between the two system.
2) I imported 100s of notes in the first NW
3) I transported the notes in the 2nd NW
Then I updated the two systems INDEPENDENTLY (in parallel):
1st NW: SPAM, SAINT, SPAM
2nd NW. SAINT, SPAM
At the end both systems have exactly the same Support Packages.
Question: What should I check now to be sure that, if in the future a transport changes from the 1st NW to the 2nd, ther will be no trouble?
Thank you and Regards,
Tommaso

Hi,
If the configuration/versions (OS, DB and SAP version along with SPS) of both the systems is same then you need not worry.
Regards,
Nirmal.K

Having multiple J2EE stacks connected to one CRM ABAP instance for CRM IPC

Hello Experts,
The situation we were looking at is this.
We have 3 distinct teams doing Java development for CRM IPC configurators
Team A - IPC/Ecommerce
Team B - UI
Team C - Order Wrapper
They each wanted to do development in their own landscape (Java Stack)
Additionally, two more landscapes are needed:
a landscape for end 2 end testing of the configuration scenarios
another for a Performance Assessment
To get 5 full dual stack CRM instances was deemed unlikely.
Trying to explore if multiple J2EE's, can be connected to one CRM ABAP system.
It seems we can not, as the CRM ABAP to JEE comminucation is via RFC and there is excatly one RFC_Destination defined per CRM (across all clients). Is this correct?
Thanks
Rocky

May be you can wordsmith your requirement to make it clear what each team is doing. Also, please mention what version of CRM / IPC you are talking about.
From what you have said, I guess IPC/E-Commerce is E-Commerce enhancement. If NWDI is in the picture, you have one track for this enhancement.
The UI - I assume is IPC UI. This is also a Java based web application that shares the same Java stack with the E-Commerce application.
What is Order Wrapper? - If it a custom web application you guys are into, I still don't see why they can't use the same Java "stack".
In the development lifecycle, it is sufficient to have only one IPC environment for each phase. The development team needs only one, unless they have a valid reason to have their own Java stack. I bet they need only one.
If the developers are asking about "Sandbox", they can have their own NetWeaver Developer Workplace in their laptop / desktop.
Easwar Ram
http://www.parxlns.com

Connect one R/3 and two PI using same ABAP Proxy

Hi experts,
Please help me with follow:
I need connect one system R/3 to two systems PI (7.0 and 7.1) using ABAP Proxy.
How can see the repository objects of the two PI systems in transaction SPROXY?
Thanks in advance.

Hi Gaurav, hi Pedro,
the mentioned blog is nearly three years old, from that blog:
>Two systems exist in the landscape:
>System X : SAP XI 3.0 system and
>System Y : SAP R/3 on WAS 620
but Pedro wants to connect PI 7.0 and PI 7.1. assumedly with newer SAP systems. I cant find any hint in the blog how to connect 2 PI systems.
From my point of view it is not possible to connect 2 PI systems to just one ECC client (may be one system with 2 clients) via ABAP proxy at the same time. You can place always only one Integration Server f.e. at SXMB_ADM / Integration Engine Configuration.
Regards,
Udo

Connecting SD and CRM servers

Hi,
I am new to SAP CRM, i have installed R/3 4.7 in one laptop and SAP CRM 4.0 in another laptop. is there any possibility to connect these two servers for the transfer ? if yes, wht is the necessary steps for these connections.
please note that the two laptops are wirelessly connected to router.
will be very grateful if someone could answer my problem.
Thanks
Kris

Kris,
Those are some pretty powerful laptops, I would assume you got 4GB of ram on those machines? Honestly though you should be able to connect the two systems. If both systems have are on the same local network, then you should be fine. Keep in mind that data transfer performance over wireless will not be as fast.
To connect your systems, you can use the best practices guides to setup the middleware exchange. The link for the CRM 40 best practices is located at:
http://help.sap.com/bp_crmv340/CRM_DE/index.htm
For middleware setup you need to perform the steps in the building blocks:
CRM Generation
CRM Connectivity
CRM Replication
Take care,
Stephen

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

connect, then in SystemPreferences/Displays you can set the two as you want.

Component SAP ABA 7.02 does not show up in sproxy in CRM 7.0 EhP 1

We upgraded our CRM system from CRM 7.0 to CRM 7.0 EHP 1.
This involved an upgrade from NetWeaver 7.01 to 7.02, i.e. also ABA 7.01 to 7.02.
In sproxy in the CRM system we can only see
SAP CRM ABAP 7.0
SAP_BS_FOUNDATION 702
various custom software components.
SAP ABA 7.02 with the interfaces for e.g. business partner distribution is missing.
(When switching to the local view, they are shown and BP replication works.)
So I went into the SLD and looked at the technical system for CRM. Indeed the product "SAP NetWeaver SAP EhP 2 for SAP NetWeaver 7.0" was not marked as installed. So I added it. On the right-hand side under Software Component Versions "SAP ABA 7.02" is now listed.
i then went to the business system for one of the clients and also selected the product "SAP NetWeaver SAP EhP 2 for SAP NetWeaver 7.0" there and I can see the SWCV "SAP ABA 7.02".
I tried restarting both the PI and the CRM instances.
Nevertheless in sproxy in CRM nothing changed.
What else could be missing?

senthilprakash selvaraj wrote:
> To be very specific,
>
> Login to SAP CRM system.
> Goto: SYSTEM-->status
>
> In there under SAP SYSTEM DATA group, you will be able to see a "Magnifying Lens" icon just below Component Version field --> click it
>
> there you will be able to see the exact version&level of the component.
Yes, that's where I copied that line
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
from.
senthilprakash selvaraj wrote:
> Now ask your basis team to deploy the same version&level in SAP PI as its shown in the CRM system.
Ah, the PI/XI content could be missing, even if this shows up in the list of products and software component versions in the SLD?
I have just checked in the ESR, that seems to be the problem, thanks.
senthilprakash selvaraj wrote:
> Note: Thou the release version might be same, the level of the component deployed in both the system might be different. hence the problem.
You mean if the service pack is different? I doubt that this would result in the SWCV not showing up in sproxy.
Monika.

Error in logical port while connecting to SAP CRM cloud

Dear Members,
I have created a logical port manually to connect to SAP CRM cloud system. But when I ping the web service I am getting below error. Please let me know how to solve this error.
SRT Framework exception: Service Ping ERROR: Error when calling SOAP Runtime functions: SRT: Couldn't create Object: ("ICF Error when creating HTTP client object by Config for URL <WSDL URL>

Hello Nihar,
The error message indicates the HTTP client object cannot be created by the given URL. Please check if your URL is correct.
You also need to check what protocol is used, HTTP or HTTPS, and ensure the protocol is active in your local ABAP system as well. You can check them by t-code SMICM->Goto->Services.
Regards,
Robert

How to Transport G/L Accounts between two systems?

Hi,
I am trying to move the Chart Of Accounts along with Company dependent data from our Dev to QA system. I used transaction OBY9 to transport the chart of accounts however, it is only transporting chart of accounts related data and I had to re-create those accounts in Company Code.
I also tried to use FS15 and FS16 between two systems however, no luck. Could you please provide any guidance based on your experience?
Thanks,
Durgesh.

Hi John,
For activating ALE for a particular message type there are following prerequisites:
1. Set up the RFC Connection (ABAP) between two systems
2. Configure model view in Sender system
3. Distribute Model view from sender system
4. Generate partner profile from sender system (In sender system go to tcode WE20 go to partner type LS and maintain outbound parameter for message type GLMAST)
5. In receiving system go to tcode WE20 go to partner type LS and maintain Inbound parameter --> Message type GLMAST and Process code GLMA.
Save entries and the above should work for you.
Generate IDOC for one GL Account and try to send company code date for one company code first. The message will appear which says "one idoc transferred".
Regards
Kapil

Connect sproxy of CRM to two systems XI

Similar Messages

Maybe you are looking for