Connect the temperature and humidity to turn on the fan
Guys! I need some help on my connection how to connect the circuit?
The first one I want to connect is my Thermistor Data. Then I want to connect the Temperature Control to turn on the fan. How to do?
Aloysius Low, Student
Solved!
Go to Solution.
Attachments:
IMG_0682.JPG 2535 KB
Thermistor 2.vi 24 KB
Alois part 4.vi 21 KB
aloislowintown wrote:
Hi!
Can you help me how to get this icon? And show me how you do. Thanks.
Cheers
Aloysius
It is clear that you have no idea even about the basics. Why a teacher would throw a task to a student, who does not know practically anything about LabVIEW? Did you not miss some lessons?
Either way, you should try to learn some before you try to program in LabVIEW.
Here is a link:
http://forums.ni.com/t5/LabVIEW/Idiom-for-initialising-a-sub-VI/m-p/3086564/highlight/true#M882347
Regarding to your actual question: as I see you want to create a subVI (what you call an "icon") which converts thermistor resistance (?) into temperature. The subVI which you posted, has one problem (i did not check the calc itself though) with the numeric output, it should be an indicator, not a control (right click and change to indicator). I do not understand your question about "How to get this icon?". You have attached this subVI to this post, so you have it. You are asking how to put this subVI into another VI?
Similar Messages
-
Firstly hello to all. I’m looking to create a vi that will
take a single logged output from a thermocouple and monitor the temperature and
produce a Boolean when the temperature has stabilised for a pre determined time
say 1minuet. I have managed to find a couple of examples on the forum but one
will only run on V8.2 and I have V8, the other is for more than one channel
witch is fine I can always reduce this, but it was the timing feature I was
having difficulty with. I looking to monitor the temperature of a motor until
it has stabilised prior to testing and then to use this temperature as a
reference. Pleas forgive my ignorance if this is a very simple thing but I’ am
learning and really enjoying it. Thank you in advance for your answers.Hi
Graham, thank you for you reply.
What I’ am trying to achieve is a vi I can use in a motor
testing setup, a part of this would be to warm the motor up until the exhaust
air temperature has stabilised, this takes approximately 10 minuets. I was
thinking of just letting the motor run for this time and leave it at this, but
some motors warm up quicker that others and. I am basically looking for a vi with
an adjustable temperature window of say ±5 C° in 1° increments, timing wise 1minuet
to 10min the adjustment is so I a can use this for another application. I tried
to adjust the code I found at the link below but had a little difficulty with
the timing. Thank you so much for your help it’s much appreciated.
sine.ni.com/niforum/niforum?forumDU=http://forums.ni.com/ni/board/message?board.id=170&message.id=251017&requireLogin=False -
My 3 month old IMAC 27 inch has no sound all of a sudden. F12 button turned on and up. Still no sound. Any other ideas?
Couple things to check. Hold the Option key down as you click on the Volume icon on the Menubar. Set the output device to Internal speakers.
Also check that headphones aren't plugged in. -
My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.
That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys -
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.
-
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
I've got the same problem.
I wanted to download the new itunes version for iphone but it got stuck. I had no choice but disconnecting my iphone. Then I couldn't sync it anymore.
I switched off my phone by holding down the sleep button but it has never successfully switched off. The round thing still turns.
I've tried to connect it back to the itunes. This is the error message I get: itunes can't connect to the iphone. Code 0xE8000065. I tried to find out what error message this is but the apple support site I saw didn't mention this error code.
Can anyone help? Thaaanks! -
I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.
I have a WRT54GC that is hooked properly to the cable modem (adelphia) according to all literature... but, our wireless connection to the x360 is lost anytime we turn off the PC, which shouldn't happen. The router is connected directly to the motor. modem. We can be on line on with the pc and x360 at the same time and we have the internet connection. But both connections will also free from time to time on us. The cable HSI was just installed and we are new to this. Any assistance would be great! I'm taking my laptop home this weekend to see if I can get on wireless with it. Also (sorry) all the lights are working as they should according to the router software, but when I put the cd in ran the wizard, it tells me it can't find the router connected to my pc. I'm going batty with this. Thanks.
MCHi ... Mac address cloning is enabled on my router - so I guess that could be a problem, and the filmware version is 1.02.5 - we just installed this thing and haven't done any type of upgrades.
A little history - adelphia didn't connect properly - turning off the pc killed the wireless router connection and then if I hooked right into the cable modem from the pc, I didn't get a connection. So, we unplugged everything and started out fresh following the install wizard and the pc now sees the router. After that, my laptop didn't lose it's connection when the pc was shut down either. So ... the xbox was next. It seems that when we have the WEP enabled, the xbox 360 can not connect to xbox live. We did a media test first it passes the connection to the wireless network and takes the WEP key, but it fails when looking for the IP address. All DHCD information is enabled. So, we disabled the WEP and ran the console test - and it passed. We then did the media test and it obtained the IP address this time, but then failed the media connect (whatever the next test is). Not sure we actually need the media text or just the xbox live test.
I'd like to be able to use the WEP security, but we can't go live when it is enabled.
We are new to this, so appreciate any assistance! -
i just got an Apple TV. i am trying to connect my itunes to the tv, it tells me to turn on the homesharing on my computer but when i try it show up a different email address than my itunes account, how do i fix so i can do homesharing?
It is quite possible to have a different iCLoud AppleID from the iTunes one - have you set up maybe Phot Stream using an non-iTunes AppleID?
-
I updated my 3GS to os5 and set up icloud and it backed it up, although, the backup says incomplete. I turned off the contacts under icloud and they are now all gone off the iphone. How do I get them back? I feel like they are in icloud, because the contacts went to another iphone i have.
I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!
-
Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??
Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
I had my photo stream on and my icloud all set up, i just had the screen replaced and they somehow lost all the photos off my phone, but why wont the photo's reload back on to my iphone now that im connected to wifi again, where are all my photos???
When photos are added to the photo stream album on a device (either due to a new photo having been taken or having been synced from another device using the stream) they remain in the album. However, the syncing process involves copying the photos to the photo stream server where they are kept for a maximum of 30 days, up to 1000 photos. If a device is reset or the stream is turned off or turned back on again (or in your case, the device was repaired), the photos that were on the device's photo stream album are gone and the only ones to appear are those that are currently on the servers (recall the 30 day limit).
If some of your photos are older than 30 days, then they are no longer stored on the cloud and hence are not synced down to the iphone.
Recall, photo stream is just a syncing service, it is not designed as a storage service for photos. Always sync photos to a computer for archiving. -
Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How Now?
and
Because my first response would be....Oh, sure.....
Because I am sorry you are having a hassle with the intenet. There is nothing more frustruating than having to deal with a slow response, or a makeshift connection....hope it gets fixed soon!!!
Your friend,
GB -
my ipad is connected to my wifi but the app store and itunes store never open, the internet never works and it is always loading but never working. I dont understand why as my computer works for my wifi and my brand new ipad should too.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?
I don't know who you would contact at Verizon to verify this, but I suspect you are in the same situation as me. My unlimited Jetpack is now being throttled to a basically useless speed of .10Mbps. Sometimes as low as .04Mbps. Turns out this is done purposely as they are evidently eliminating unlimited. They're doing this now even though accounts still display on the my device page as unlimited. They have given no warning, no explanation and started it in the middle of a billing cycle. At least for me. Be prepared to pay about double for 20GB with I think and $8 per gig overage cost. With the 5GB plan it appears they just throttle down to an unusable speed. Currently considering saying goodbye to Verizon myself. Even with some need to change plans and eliminate unlimited this isn't the way to treat customers during the change.
-
Creative cloud said I'am not connected to the adobe server and now i cant download the programs? What do i have to do?
Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Maybe you are looking for
-
Company Code and Vendor Account
Hi all, i have a simple question. we defined Vendor numbers as followed: external starting with 1 internal with 3. i.e. below: At time we have one vendor 107701 and a customer attached to it 100653 in 9100 company code. This vendor was an external. A
-
How can I print a 3 1/2" x 4" photo? The picture is cropped to that size in iPhoto, but when I print it, it comes out much larger.
-
ORA-01017 with Managed Provider 4.112.3.60. Bug with ODP on Win 2008 R2?
I'm experiencing some trouble with the manage provider and I can't seem to figure out what's causing the issue. At first, the Managed Provider seemed to be a drop in replacement for the Unmanaged Provider. However, when we moved some code to our tes
-
Incomplete downloaded podcast marked as complete
iTunes is downloading podcasts but not moving them from the Download folder to the Podcast folder. Yet, it is marking the podcasts as complete. I have gone thru the process of deleting the podcast, and re-downloading, but they fail at the same point.
-
My mac is showing a circle with a line through it on boot up any ideas
I have been having a couple of problems with my imac and it said to do a clean install so i then copied an image of my hard drive and followed the instructions such as delete and formate the disc and then reboot the system with the setup disc in it i