Connect Thunderbolt on new iMac to Firewire 400 device

I would like to connect a tape-based camcorder with a (4-pin) Firewire 400 output to a Thunderbolt port on my late 2012 iMac (which has no Firewire ports).  Apple sells a Apple Thunderbolt to FireWire Adapter (i.e., Firewire 800).  I'm thinking I could plug that into a 9 PIN/ 4PIN BILINGUAL FireWire 800 - FireWire 400 Cable  from monoprice.com.  Should that work, and if so, is it the only/best solution?
Cary

Welcome to the Apple Support Communities
That should work without any problem.
If your camcorder has got other connections like USB, I recommend you to use USB instead, so you will save money and there are more possibilities that it works. Also, if it has got a SD card, you can insert it directly onto the iMac without connecting your camcorder

Similar Messages

  • Connecting Macbook to new iMac

    I recently bought the 24 inch iMac because my Macbook (purchased April 2006) is slow, unresponsive and has a broken optical drive. I have all of my recent photographs on my Macbook and would like to transfer them to my new iMac using a brand new Firewire 800 9-6 pin cable. My macbook is in working condition and this should work.. however my Macbook in FW mode isn't showing up on my iMac! Help!

    That should be working. Try restarting the iMac with the MacBook connected in target mode. Also, if you run Disk Utility, does the MacBook's drive appear in the sidebar?
    If you have never used that new cable for anything else, it is possible the cable is bad. It is also possible one of the FireWire ports is faulty. Do you have any FireWire 400 device? If so, use that cable to connect it to the iMac's FireWire 800 port, as a test. That will test the iMac's port and the cable. Also try connecting it to the MacBook with a normal cable, to make sure that port is working.
    You can also connect the two Macs using +File Sharing+ over the network. Using an Ethernet cable to directly connect the two Macs will be faster than using wireless (as long as you use a Cat-5e or better cable). Just turn on +File Sharing+ in System Preferences Sharing pane on the MacBook. On the iMac, the MacBook should appear in the sidebar of any Finder window. Select it and click on the +Connect As+ button over to the right. Provide a username and password for an user account (on the MacBook).

  • Transferring Data from old iMac to new iMac via Firewire

    I am having difficulty transferring data from my old iMac to my new iMac via firewire. Per the instructions contained in migration assistant, when I hold down the letter "T" key during startup of the "old" mac the firewire symbol does not appear. Given that the firewire symbol does not appear I am unable to proceed with the transfer. Of note, my new Mac is the '09 24" iMac and my old iMac is the early 2006 model with the 17" screen. Incidentally, I am using the following cable contained in the attached link along with the adaptor (400) with respect to my old iMac.
    http://www.bestbuy.com/site/olspage.jsp?skuId=8846387&st=firewire&lp=10&type=pro duct&cp=1&id=1215819175946
    Can anyone help?

    Hi Todd
    Not sure why that wouldn't work, but it could be that cable and adapter setup as the Early Core Duo only supports firewire 400.
    You should try a 9 to 6 Pin Bilingual FireWire Cable:
    http://www.monoprice.com/products/product.asp?cid=103&cp_id=10301&cs_id=1030105&pid=3542&seq=1&format=2
    http://www.firefold.com/6-Foot-9pin-6pin-IEEE1394B-Firewire-Cable-P965.aspx
    Dennis

  • I have 2 external drives connected to my new iMac. I can see but no one else can, the other can be seen but not written to.

    I have 2 problems, i have 2 external drives connected to my new iMac.
    Both are formatted to FAT 32, one I can see but no one else can and I can write to that drive,. The other can be seen by all but not written to by me or anyone else (This drive was used on PC but is FAT32 (have been back to the PC & told it to read write).
    Permissions are correct on both that I can see. Thats the extent of my knowlege.Please help

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • Using the firewire 800 port for my firewire 400 devices

    I will be purchasing, at long last, a new mac mini to replace my faithful and well behaved G4 mac mini. I have a 20" cinema display and an external firewire 400 backup drive with the same form factor that sits below the mini. I would like to continue to use these peripherals as well as my video camera DV out. Ideally, it would be cool to have a FW800 hub that had both 800 and 400 places to plug my peripherals, but I don't see that available. Should I get a hub and adaptors for the fw400 components I want to add, or use the hard drive with an adaptor to the mini, then use the FWports on the drive for the monitor, and whatever else I want, thereby using the drive as a hub...
    Any advice to this ignorant question would be appreciated.
    Thanks,
    Paul

    Since Firewire 400 devices still operate at Firewire 400 speeds regardless of whether or not they are connected by adapter to Firewire 800 ports, the best thing to do is just get a Firewire 800 to 400 adapter, and attach it to a Firewire 400 hub known to be able to do all the functions you desire.
    Note, migrating to Intel Macs from PowerPC Macs is not as easy as the Migration Assistant, as this user tip explains:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

  • Best connection between new iMac and firewire MacBook Pro

    Hi I'm running a MBP with Firewire, USB (2?) and Ethernet ports. I am soon to take delivery of my shiny new iMac with Thunderbolt, USB 3 and Ethernet ports. What please would be the fastest connection I can establish between the two machines? Thanks, M

    Ethernet is your fastest choice - FW800, to be precise.
    To transfer from the MBP to the iMac use Target Disk Mode. Boot the MBP into TDM, boot the iMac normally and preferably for the first time. This will put you into the Setup Assistant and let you migrate data from the MBP - Home folder, third-party applications with support files, and system preferences.
    If you prefer not to do a migration then you can also simply transfer selected items using drag and drop.
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
      1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
      2. Screensavers written for the PowerPC System Preference add-ons
      3. All Unsanity Haxies Browser and other plug-ins
      4. Contextual Menu Items
      5. Applications which specifically require the PowerPC G5 Kernel extensions
      6. Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
      1. Intel In Macs
      2. Apple Guide to Universal Applications
      3. MacInTouch List of Compatible Universal Binaries
      4. MacInTouch List of Rosetta Compatible Applications
      5. MacUpdate List of Intel-Compatible Software
      6. Transferring data with Setup Assistant - Migration Assistant FAQ
      7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
      1. Repair the hard drive and permissions using Disk Utility.
      2. Backup your data.  This is vitally important in case you make a mistake
          or there's some other problem.
      3. Connect a Firewire cable between your old Mac and your new Intel Mac.
      4. Startup your old Mac in Transferring files between two computers using FireWire.
      5. Startup your new Mac for the first time, go through the setup and
           registration screens, but do NOT migrate data over. Get to your
           desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
      a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
          Late 2008) - What to do if migration is unsuccessful;
      b. MacBook Air - Migration Tips and Tricks;
      c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
          wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • Migratiing files from a MacBook Pro to a new iMac via firewire connection

    The firewire connection does not appear to work between my older MacBook Pro running 10.4.11 and my new iMac running 10.5.6. I've been trying to use migration assistant and it never gets passed "waiting for old mac to restart". I 've put the target macbook pro into target disk mode by pressing "t" at startup and then using system preferences, start up disk, start disk in target mode. It appears that the iMac just can't see the older mac. Any suggestions to trouble shoot? Very little info on apple's support documentation. I have over 90 GB of data (music, files, photos). I can do this over a network connection but it will take 30 hours just to copy my itunes library.

    I would start by doing the following on the MBP:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, turn off both computers. Connect via a Firewire cable. Boot the MBP into TDM. Wait for the TDM screen to appear. Now boot the iMac normally. See if the disk drive of the MBP doesn't appear on the iMac's Desktop.

  • Mac Mini to new iMac via FireWire (9-pin to 6-pin cable necessary?)

    I can't seem to find a straight answer on this.
    Am I correct in assuming that the only FireWire cable that can be used to connect a Mac Mini to a new iMac is a 9-pin to 6-pin cable such as http://store.apple.com/us/product/TP320LL/A?mco=MzE2OTkyOA ?
    6-pin cables won't fit in the new iMac? I don't have the iMac yet so I can't check.
    Thanks,

    Or you can just get an adapter and use your existing FireWire 400 cable.
    http://eshop.macsales.com/item/Other%20World%20Computing/FIR1369AD/
    Or you can use a standard Ethernet cable and use +Fire Sharing+. Both your Macs would have gigabit Ethernet ports, so as long as the cable is Cat-5e or better, it would be pretty fast.

  • IMac to new iMac via Firewire---Hung up at 34 minutes for 8 hours

    I have a 2007 iMac connected to my new 27" iMac via Firewire 800->400 cable. It seems to have gone fine, for awhile. Now it's stuck at 34 minutes remaining for over 8 hours.
    Do I let it keep going?
    If not, how do I stop it and start over? Won't the new machine have some of the files already transferred? I'd like to start clean again.
    Please help! Missing work here.....
    Steve

    It's possible one of the Macs went to sleep.
    It's also possible there's a problem on the old Mac's internal HD. Verify it, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).
    Do you have either Time Machine or "clone" backups of the old Mac, on an external HD? If so, it's a bit easier to plug that in to the new one and transfer from it. Start with the "Second Chance" in the green box of [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum).

  • Is it possible to connect home cinema new iMac?

    As in title
    Is it possible to connect home cinema harman kardon bds to new iMac through thunderbolt-hdmi or other way?
    Thanks,
    A.

    are you trying to hame your imac play out of your stereo
    or are you trying to input audio from your stereo into your imac?

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • Transferring files from MacBook Pro to new iMac via Firewire

    Hi guys
    My MacBook Pro is seriously on its way out and I would like to transfer my music files, work documents, photographs, videos etc. onto my brand new iMac and the best way to do this I would think would be to link the two up via Firewire. The MacBook Pro is no longer accepting my external hard drive and fails during during DVD's, so those options are out.
    So I was wondering if someone could advise me on what type of Firewire cable to get. As far as I'm aware I didn't get one with either the MacBook Pro or the new iMac, so I think a purchase is necessary however, I've spotted that there are different kinds with different ends, some which have 6-pin, 8-pin and 9-pin and I have no idea what to get. Could someone advise me on what would be the best item to get for this situation?
    My MacBook Pro is one that was the model before the black keyboards came back in, and the iMac is the brand new one at 21".
    Thanks for your help guys.
    Steve.

    Hi
    FireWire 800 / FW800 / IEEE 1394b uses a 9-pin connector for both the imac and the macbook pro.
    good luck.
    M.

  • Moving ALL files from an old iMac to a new iMac, via Firewire...

    After hooking up my old iMac (2 years old) to a brand new one, via firewire, and checking every box to copy, it didn't copy my iTunes or iPhoto libraries to the new computer. Does this have to be done with DVDs, or through an iPod?
    Only applications, Logic, photoshop etc. copied onto the new iMac.

    Moving iTunes folder
    http://support.apple.com/kb/HT1449
    Moving iPhoto
    http://support.apple.com/kb/HT1229

  • Connecting on a new iMac G5

    Trying to help a friend get his new iMac G5 on to the net, transferred his old setting from his old mac running 10.2.8 which used a usb cable, connected to a external modem/single router which then goes direct to the phone line. But with the new mac's there is no setting for internal modem and hence we cannot set up his broadband connection to work using the usb port.
    Any help greatly welcome

    I'm not clear about all the details, but I am assuming you are talking about a DSL modem with only a single USB port connection for the computer, not a regular dial-up modem, which is what an internal modem network port setting would be for on Macs that support them.
    If this is the case, I'm afraid your friend will need a DSL modem with an ethernet port or wireless link because Tiger doesn't seem to support high speed USB modem connections. (Apple sells a USB dial-up modem for the new iMacs -- see http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA0 34Z/A -- but I don't think from your "broadband" comment that this is what you want.)

  • Transferring files to new iMac using FireWire

    I've been trying for the last few hours, without success, to transfer files from my old G4 to my new intel iMac. I've done several FireWire transfers in the past, so I think the cable is OK and I'm not sure what's going on here.
    At first, when I tried to transfer the files, the Migration Assistant just froze up. The Apple Help file suggested that I install a firmware update on my old computer, but even after doing that, my new machine won't acknowledge the old one. Is there something else I should be doing?

    Put the old G4 in target disk mode so it shows up on the new iMac as a hard drive. Shut off old computer, then hold the "T" key down while you start up. Hold it till a Firewire Icon shows up (if you have a monitor hooked up to the G4) or till a Hard disk shows up on iMac screen.

Maybe you are looking for