Connect to 10.7 server via SMB

So I am testing out 10.7 server on my home network and all is working great except my media extenders (popcorn hour) can't connect to my server anymore because of apple's new rpelcaement to SMB. They don't even see it on the network. SO, is there any way to get install or get SMB working again on 10.7 server? I have this new mac mini I would love to use, but it only runns 10.7, I can't go down to 10.6.8
Thanks For any help you might have,
SCott

As far as I can tell it was dodgy replicas, have changed all remote servers to a "Connected To" OD setup.
My OD is still screwed though

Similar Messages

Connection to Windows 2008 Server via SMB hangs after standby

After boot or reboot, I can easily "connect to server" in finder to the Windows Server 2008 machine via smb://hostname. The network and shares work good without connection drops.
However, when my Macbook resumes from standby or hibernation, the mounts do not reconnect, and the connected server in finder keeps reconnecting until the connecting failed message appears. When trying to unmount the smb server, finder hangs from time to time. When trying to reconnect via "connect to server" using either IP address or hostname, the connecting window with the moving bar appears, but never succeeds. The only option is to reboot the machine to be able to reconnect to the windows server and mount some shares.
Anyone any ideas?
Thanks!

I've been having exactly the same issue on my iMac-- very frustrating. I'm not aware of a permanent cure yet, but on my system I usually can avoid a full reboot by turning my Airport/wireless on for a few seconds, and then off again. The Windows shares become visible again after doing so. (My normal state is wired network only, with Airport off.)

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When connecting to file server via smb shows no space available! Help!

We are running an XSERVE with Mac OS X 10.5.5 and have multiple clients that connect to it (mac and windows).
For some reason yesterday one of the clients (10.4.11) when connects to the file share using the smb protocol shows up with 0kb available and he is not able to copy any files. Every other computer shows 4TB available. When I connect to the share on his machine using my credentials I get the same problem. However, when I connect using his credentials on my machine it shows up correctly with 4TB free. Also, when he connects via AFP it shows the full 4TB. Any idea what could be causing this?
(the reason he connects via smb is because for some reason the people on 10.4.11 experience very slow AFP transfers sometimes. If anybody knows whats causing this that would help too hehe) Thanks in advance to anyone that takes the time to help me.

If it is an identical machine, put the machine that works fine into target disk mode and boot the machine that is having issues from the other machines drive. That will eliminate most hardware issues.
My guess is it is a system file or a settings file in the users library. I have fixed several issues like this on computers that were running 10.4 I believe and think they were upgraded from 10.3 by someone else. The issue had something to do with permissions and files.
Try some of the following:
- create a new user on the computer and see if that user works. if so, it's something in the user folder (most likely User/username/Library/). If not, then it is something outside the user folder.
Try
- running a combo Update on the machine
- run disk utility file and permissions on the drive
- Backup the user folder and clone the drive that works onto this drive, and move the user folder over. (assuming you know how to do that, it is easy)
REGARDING Slow AFP - having the same issue with 10.4.11 Server. Most clients are Leopard. Intermittent, so hard to diagnose. Tried several solutions on this wait and see issue.

Connection to server via smb not working

hi,
i have an old G4 iBook 10.3.9 that i'm using for school. to connect to our school server for course material, we were given smb log-in instructions from our it dept. when i put in the ip address, i get a prompt for the id and password, but i cannot get access. we tried logging on with my professor's macbook pro (10.5) and it worked flawlessly.
i've done all software updates and rechecked the procedure dozens of times, but i can't figure out why it's not working. if anyone has an idea, i'm all ears.
thanks,

created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
SQL> select * from "movieclass"@mysql;
idClass
ClassName
123
H e l l o
As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
Here the data type mapping:
SQL> desc "movieclass"@mysql;
Name Null? Type
idClass NUMBER(3)
ClassName NOT NULL NVARCHAR2(50)
What's the exact version of DG4ODBC you're using? 11.1.0.7?
According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
6890831 Oracle Database Family: Patchset
11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
and then please apply also the latest patch:
8689191 Oracle Database Family: Patch
ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
There was a high/low byte issue
Edited by: kgronau on Aug 11, 2009 10:28 AM

Files locked when Windows clients are connected to ML Server via smb

Hi,
I've got a problem with windows 7 clients that are connected to my MacMini Server.
When they open files on a shared folder, and modify them, files are locked when they try to save them.
I think it might be the op-lock option present in older versions of Mac OS X Server that can be involved, but it disapeared in Lion and older version of OS X Server.
Does someone knows how to activate/deactivate this option, or does someone already got this problem?
Server is a MacMini with 10.8.5 + Server 2.2.2
Clients are Windows 7
Thank a lot for your answers
Bertrand.

Officially, Adobe does not support opening or saving files to a server --- because so many different things can go wrong with networking.
The permissions error means that the file/directory permissions are incorrect on the file server, or that the OS or server is incorrectly reporting file/directory permissions.
Photoshop does more error checking than most applications, because we have seen so many problems in the past, and don't like applications silently losing or damaging files (which we see in other applications).

Lost Connectivity with WinXP Home SP2 via SMB - Permission Denied

Suddenly today, I could not connect to my Win XP Home machine via SMB. Console reveals the following:
mount_smbfs: error from NetrShareEnum call: exception = 382312522
mount_smbfs: session setup phase failed: syserr = Permission denied
mount_smbfs: could not login to server FAMILY-ROOM: syserr = Permission denied
We recently had a trojan virus on the Windows machine but erradicated it. However it messed up the Windows firewall and had to reset the registry keys to eliminate a Group Policy message in windows firewall. Windows machine is operating fine, but cannot connect our Mac. We have a valid account and password on the windows machine.
Thanks for your help.
One more thing. I recently updated to iTunes 7 on both Mac and PC and Front Row 3 on Mac.

tried that didnt work i have however seemed to gotten rid of the samba fault message by removing the password=*** line now it mount proberly altough if manually mounting it asks for a password and i simply press enter and it moves on i still get permission denied when trying to mount with cifs though

ITunes media on Linux server via SMB - slow imports, changes and stalls

I have an unRAID server (lime-technology.com) which is a Linux based server. I'm getting terrible performance with iTunes. The music playback is fine. But if I import a song file or change any metadata, it has problems. This isn't new, I've read many, many posts complaining about this and other problems concerning SMB shares and file systems. But I think I may be onto something and would like some advice.
This is what I've found so far. Snow Leopard, OS 10.6.x, has a problem with SMB and/or any file system other than HFS+. HFS+ is the common files system for OS X.
There are hundreds of posts on the web complaining about temporary freezes, slowdowns, sometimes crashes with SMB shares and other file systems. I have yet to see Apple acknowledge that there is a problem, but there are a few suggestions out there that seem to have helped people. I'll be trying out some of these this week and post the results here.
From my own observations, specifically with iTunes, I've noticed some strange behavior. Here's my setup. I have an iMac running 10.6.4 (the latest update), the latest iTunes 10. The iTunes app is located on the local internal HD, I have my iTunes library files and all my media on disk 1 of my unRAID server. I'm hard wired to the server via a gigabit router. I have iTunes set to keep the media organized and copy the media files to the server.
When importing a song file into iTunes, the file initially seems to copy at a good rate, the file appears in it's proper place and you can see the size increasing as it copies. Then it stalls for a while, then the name changes to a long hex number for a few seconds and then reverts back to its' normal state. The process can take 30-40 seconds, even with a small song file. I looked at the console and I got the following error message:
Quote
+11/8/10 12:24:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[2820] Possible unresolved transaction race -103/(Master Music Library/John Lennon/Rock 'N' Roll,(null))+
The same thing happens when I make a change in the metadata. For example, I added onto the name of an album and for each song it changed I got:
Quote
+11/8/10 12:37:36 AM /Applications/iTunes.app/Contents/MacOS/iTunes[2820] Possible unresolved transaction race -103/(Master Music Library/John Lennon/Signature Box Set 5 - Walls And Bridges,(null))+
This happens for each file imported or changed even within iTunes.
I followed the first path in the error message: /Applications/iTunes.app/Contents/MacOS/iTunes[2820].
In the /Applications/iTunes.app/Contents/MacOS/ folder I find the following files:
iTunes
libgnsdk_musicid.1.7.1.dylib
libgnsdk_sdkmanager.1.7.1.dylib
libgnsdk_submit.1.7.1.dylib
where iTunes is a Unix Executable File.
I did some more research and have found some posts about file systems other than HFS+ having trouble with app packages. I believe that all OS X apps are actually packages, like folders, but appearing as a single file. Other file systems don't seem to know what to do with these. There was some talk of "flattening" these app packages, but I haven't gone forward with that yet because I'm not sure I understand it enough yet.
I've also noticed that in the getinfo box under sharing & permissions I usually get "You can read and write", but with apps I get "You have custom access". This was something i had noticed before and thought it was a problem on the server, but I didn't realize it until now, I'm getting the custom access on every app. So I think that's probably normal.
I'm wondering if I'm having a permissions problem with the iTunes Unix Executable File. Right now the permissions are set as follows:
system: Read & Write
admin: Read & Write
everyone: Read only
Maybe it's trying to write to that file or another one and doesn't have the right permissions since the song file is now on the server and that's causing the stalls? I'm over my head here. Anyone have any ideas?

I have the same problem with Excel files on an external drive. The drive is attached to my computer which is on a network and another user accesses the external drive. The problem of "custom access" began after our main server went down. I hope someone can come up with a solution so that I can set the permissions. For now the Excel files are all read only.
Linda

Can't connect to a VPN server via Airport Extreme Base Station

My husband is unable to connect to his employer's VPN server through our Airport Extreme when he uses his work PC at home. Strangely, when we had a Dell True Mobile wireless router this was not an issue. He could reach his VPN server via PC, AND our Mac wireless network also worked thru the Dell True Mobile. Is there any way to configure the AEBS to allow VPN connectivity? Do we need to switch to a different brand of wireless router? Please advise.
Mac OS X (10.4.7) Airport admin utilities 4.2

First welcome to the discussions.
To set up the client you'll first have to ask the Network Administrator for the name of the VPN server. The username and other details you will need to log on.
You will also need to find out if the VPN uses PPTP or L2TP over IP Sec. with that information in hand open Internet connect in the Applications folder choose NEW VPN Connection then you click on either PPTP or L2TP whichever the network uses, then click continue in the confiquration pop up menu, Choose Edit confiqurations Then enter the information the Network administrator gave you.
Bear in mind that the OSX client does not work with all VPN's.
You may have to purchase a universal VPN client such as VPN Tracker from Equinux ($90.00).
http://www.equinux.com
Good Luck Don

Unable to connect to data mining server via data miner

Hello!
After installing Critical Patch October 2005 we receive the following error message while trying to connect to the data mining server: "Unable to connect to data mining server".
Before installing the patch we had no problems connecting via data miner (Windows 2000 Client).
We are running Oracle DB 10.1.0.3 on SUSE 9 Linux.
Any help would be appreciated.
Regards
Alexander

Hello Xiafang!
Thanks for your reply.
The query results are:
SQL> conn sys@oraentw as sysdba
Enter password:
Connected.
SQL> select comp_id, version, status from dba_registry;
COMP_ID VERSION STATUS
WK 10.1.0.3.0 VALID
EM 10.1.0.3.0 VALID
XDB 10.1.0.3.0 VALID
AMD 10.1.0.3.0 VALID
CONTEXT 10.1.0.3.0 VALID
SDO 10.1.0.3.0 VALID
ORDIM 10.1.0.3.0 VALID
EXF 10.1.0.3.0 VALID
OWM 10.1.0.2.0 VALID
ODM 10.1.0.3.0 VALID
CATALOG 10.1.0.3.0 VALID
COMP_ID VERSION STATUS
CATPROC 10.1.0.3.0 VALID
JAVAVM 10.1.0.3.0 VALID
XML 10.1.0.3.0 VALID
CATJAVA 10.1.0.3.0 VALID
APS 10.1.0.3.0 VALID
XOQ 10.1.0.3.0 VALID
17 rows selected.
SQL> select parameter, value from v$option where parameter like '%Data Minin%';
PARAMETER
VALUE
Data Mining
TRUE
Data Mining Scoring Engine
FALSE
What do you suggest to do next?
Thanks in advance
Alexander

Unable to connect to Cox SMTP server via home wifi

Two weeks ago my wife's iPad became unable to send email via her Cox email account after a year of working perfectly. Shortly thereafter, my iPhone Cox mail account started acting the same way when it was connected to my home network. When the iPhone is connected via 4G, the Cox mail account works fine. My Yahoo account on my iPhone works perfectly. My wife has a Yahoo account on her iPad that also works flawlessly.
I have a 5th Generation Airport Extreme running 7.6.3. The ISP for this location is Charter.
I can ping the Cox SMTP server from my Macbook Pro connected to this network. My connection to the Cox account via Apple Mail on the MBP also works, although it has sporadically also exhibited the same problem.
I have tried to set up a new Cox account on my wife's iPad, my iPhone, and my iPad. Once I enter the credentials, the account setup gets hung at the Verifying step and fails.
For some reason, the iOS devices are unable to communicate through my Airport Extreme to the Cox SMTP server.
At the time the problem started, there were no relevant software or firmware updates applied.
And don't tell me this is a Mail problem. If this were a Mail problem, how come it works fine when connected to the cellular network?

Yahoo settings for both POP and IMAP are in the linked article.
Yahoo POP Mail Settings

Macintosh mount server via SMB

Testing out mounting NW 6.5 SP8 server from a macintish using SMB versus AFP.. I can successfully mount the server via AFP and also with SMB. When I mount the server via AFP the mounted server shows the complete server name appended with the volume name ie (testserver.vol1).. if I mount the same server and volume via SMB is simply mounts as VOL1 (no server name)..
If i use Imanager and change the CIFS properties of the server to add shares for the volumes (ie add testserver.vol1) and then restart cifs, I cannot log into the server anymore (it reports back that a unexpected error has occurred - error code -50)..If I delete the added shared and let the server simply report the default names, and then re-start CIFS, I can again login to the server
anyone have any ideas ??
Thanks in advance
Doug

On 23/03/2012 16:26, roehmdo wrote:
> Testing out mounting NW 6.5 SP8 server from a macintish using SMB versus
> AFP.. I can successfully mount the server via AFP and also with SMB.
> When I mount the server via AFP the mounted server shows the complete
> server name appended with the volume name ie (testserver.vol1).. if I
> mount the same server and volume via SMB is simply mounts as VOL1 (no
> server name)..
>
> If i use Imanager and change the CIFS properties of the server to add
> shares for the volumes (ie add testserver.vol1) and then restart cifs, I
> cannot log into the server anymore (it reports back that a unexpected
> error has occurred - error code -50)..If I delete the added shared and
> let the server simply report the default names, and then re-start CIFS,
> I can again login to the server
Are you trying to make the CIFS (SMB) mount appear in the same format as
the AFP mount?
If so then you can't but you can make the the AFP mount appear the same
as CIFS by setting the Shared Volume Name in iManager or editing
/etc/opt/novell/afptcpd/afpvols.conf.
Finally please note there is a dedicated support forum covering CIFS and
AFP @
http://forums.novell.com/novell/nove...e-file-access/
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

How to connect to an FTP server via Midnight Commander _User_Menu_?

Hi everyone.
There's a nifty command that works in MC and makes it connect to an FTP server and display its directories just as if they were local ones: cd ftp://USER_LOGIN@SERVER_NAME. The only thing it asks for is a password, obviously. That's exactly what i'm looking for, theoretically.
I know it's not really a standard Bash command, because if invoked outside MC, it returns an error (directory not found).
I got kind of tired of typing it in (or copypasting it) every time, so i thought why not make it automatic? A Bash alias or a shell script wouldn't work, because as i said, it's not really a bash command.
But what surprised me was that it didn't work as an entry in MC's menu, too.
Tried to go another way, discovered kftp, apparently it's completely not what i am looking for.
And i didn't even understand what F9 > Left > FTP Link in MC did. It isn't automatic as well anyway, i have to type everything in manually.
Can anyone advise how to automate FTP connection in MC, or even in Bash (so that MC just treats it like a regular directory)?
Big thanks in advance.
Last edited by kiruch (2010-07-04 20:53:44)

kiruch wrote:mcsilva, here are the contents of my ~/.netrc file: machine ftp.0fees.net login MYLOGIN password MYPWD
When i invoke cd ftp://ftp.0fees.net, it tells me bash: cd: ftp://ftp.0fees.net: No such file or directory
This is not the correct way. You are using bash command line. For this to work it must be:
# mc cd ftp://ftp.0fees.net
kiruch wrote:When i invoke it as an entry of MC's menu (what i'm aiming for), i get /tmp/mc-cyril/mcusr6BWdYd: line 2: cd: ftp://ftp.0fees.net: No such file or directory - well, basically the same.
I don't know what do you mean by "invoke an entry of MC's menu",
Is this:
Left->FTP link or Right->FTP link ?
kiruch wrote:And finally, if i type cd ftp://ftp.0fees.net manually into MC's command prompt, i get a red alert message that says Cannot chdir to "ftp://ftp.0fees.net". Input/output error (5)
In the first post you said you were able to login with "cd ftp://USER_LOGIN@SERVER_NAME", so MC is working well.
This error you showed is the same which I have when I type "cd ftp.0fees.net" in the MC command prompt (maybe you typed wrong...)
Instead, when I try "cd ftp://ftp.0fees.net" the popup error is: "ftpfs: Login incorrect for user anonymous"
This is what I expected, because I don't have the username and password and I'm trying a anonymous login.
Are you sure your typing is right? Please, check your typing and try again.

Connecting to the admin server via SSL

Hi there,
I'm trying to connect to our Admin server in a testing environment in a DMZ from another linux box. We've tried the same method on previous testing environments and its worked ok with a .conf and .key file.
java -Dssl.debug=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.TrustKeySore=DemoTrust weblogic.WLST
wls:/offline> connect(userConfigFile='../acols_cobb.conf', userKeyFile='../acols_cobb.key', url='https://cobb.workcover.dmz:9191')
Connecting to https://cobb.workcover.dmz:9191 with userid system ...
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 8620279>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will NOT be Muxing>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <write SSL_20_RECORD>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <4600242 SSL3/TLS MAC>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <4600242 received HANDSHAKE>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <4600242 SSL3/TLS MAC>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <4600242 received HANDSHAKE>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 50788157593152036917613181257703108893
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=cobb
Not Valid Before:Thu May 21 11:13:10 EST 2009
Not Valid After:Wed May 22 11:13:10 EST 2024
Signature Algorithm:MD5withRSA
>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Dec 31, 2009 11:21:27 AM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 50788157593152036917613181257703108893
Issuer:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=CertGenCAB
Subject:C=US, ST=MyState, L=MyTown, O=MyOrganization, OU=FOR TESTING ONLY, CN=cobb
Not Valid Before:Thu May 21 11:13:10 EST 2009
Not Valid After:Wed May 22 11:13:10 EST 2024
Signature Algorithm:MD5withRSA
>
<Dec 31, 2009 11:21:27 AM EST> <Warning> <Security> <BEA-090542> <Certificate chain received from cobb.workcover.dmz - 203.82.216.131 was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>

Hi,
You are not able to establish connection with the Admin server because there is no trust between the two.
D:\weblogic\wls924\user_projects\domains\saml_1.1_source_post>java -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.CustomTrustKeyStoreType="JKS" -Dweblogic.security.TrustKeyStore=CustomTrust -Dweblogic.security.CustomTrustKeyStoreFileName="D:/weblogic/wls924/user_projects/domains/saml_1.1_source_post/trust.jks" weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> connect()
Please enter your username [weblogic] :weblogic
Please enter your password [weblogic] :
Please enter your server URL [t3://localhost:7001] :t3s://localhost:7002
Connecting to t3s://localhost:7002 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'sam
l_1.1_source_post'.
wls:/saml_1.1_source_post/serverConfig>
Regards,
Puneeth P

Connect to Server via SMB does not work under 10.5

Hi- I have a feeling that my account has to be reset server-side, but I'd enjoy some feedback. I still use a dual (1gHz) Quicksilver G4 which is solid as a rock and still adequate to my needs. Apart from an overall seeming sluggishness, I have a very serious problem: I am one of 7 Macs on a much larger Windows network and connecting to the various servers and directly to my Windows desktop using SMB has always worked great. Up until yesterday. After upgrading to 10.5 from 10.4.10, I couldn't get on to any of the servers, I checked the network setting and noted that they reverted to AFP. I enabled SMB and still can't get onto any of our network servers. I am, however, able to get into the Mac Public\Drop Box from the WIndows computer, but not vice-versa. I have already verified and repaired permissions, etc. Solutions, suggestions? Patch forthcoming?

Same problem with my Nokia 6650d, also after Ovi upgrade. Any hints?

Connect to 10.7 server via SMB

Similar Messages

Maybe you are looking for