Connect to a Linkstation through a WRT54GS v6

Trying to see my Linkstation NAS through the router but I'm not sure how to access it.
The "easy set-up" CD that comes with it can't find the Linkstation when it's pllugged into the router.  Plug it into the computers ethernet port and it's fine.
Is there some kind of IP or port forwarding or any of that crap I have to do first so that I can see it?
I'm on a vista machine.

It's a Linkstation Pro Duo 1tb.
I found out how to access the Linkstation using the IP that my router gives it and I can add files and stuff to it now.   I still have to figure out how to make the stock NasNavi program work and connect to the Linkstation though.
From what I've read it's usually a firewall/antivirus issue on the computer side of things not letting the NasNavi program get to the firewall.  So at this point I'm sure it's not a router configuration issue :-) .
Any thoughts would still be appreciated though.

Similar Messages

  • Connecting a new computer through linksys router

    I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these .. can anyone help?

    To get network key, connect your computer to one of the four ports on router using ethernet cable. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. Go to wireless tab. Go to wireless security sub-tab. If security mode is wpa or wpa2 note down passphrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key

  • No signal through linksys wrt54g router

    my internet signal is no longer going through the wrt54g router - don;t know why.
    i.e. no wireless handheld or computer and no ethernet when going through the router.
    If I bypass the router the internet is fine, with the ethernet cable
    I tried shutting everything down with power disconnect for periods of time, then bring everything back to power.
    settings in linksys setup 192.168.1.1 look ok as far as I know; signal lights on router and modem are normal; settings in mac system prefs look normal also.
    Suggestions?
    Thank you

    hardware WRT54G v2.2
    Config and firmware:
    Firmware Version: 
    v4.21.1, Nov. 6, 2006
    <script type="text/javascript">// Capture(stacontent.curtime) // </script> Current Time: 
    <script type="text/javascript">// localtime(); // </script> Wed, 27 Oct 2010 12:53:48
    <script type="text/javascript">// Capture(share.macaddr) // </script> MAC Address: 
    00:13:10:0F:CB:14
    <script type="text/javascript">// Capture(share.routename) // </script> Router Name: 
    WRT54GL 
    <script type="text/javascript">// Capture(share.hostname) // </script> Host Name: 
    homenet 
    <script type="text/javascript">// Capture(share.domainname) // </script> Domain Name: 
    <script type="text/javascript">// if("" != "") { document.write(""); } else { document.write(""); } // </script>
    <script type="text/javascript">// Capture(share.internet) // </script> Internet
    <script type="text/javascript">// Capture(share.cfgtype) // </script> Configuration Type
    <script type="text/javascript">// Capture(stacontent.logtype) // </script> Login Type: 
    <script type="text/javascript">// Capture(setupcontent.dhcp) // </script> Automatic Configuration - DHCP
    <script type="text/javascript">// var status1 = "Disable"; var status2 = "&nbsp;"; if(status1 == "Status") status1 = bmenu.statu; if(status2 == "Connecting") status2 = hstatrouter2.connecting; else if(status2 == "Disconnected") status2 = hstatrouter2.disconnected; else if(status2 == "Connected") status2 = stacontent.conn; document.write(status2); document.write("&nbsp;&nbsp;"); var but_arg = ""; var wan_proto = "dhcp"; var but_type = ""; if(but_arg == "Connect") but_value = stacontent.connect; else if(but_arg == "Disconnect") but_value = hstatrouter2.disconnect; but_type = but_arg +"_" + wan_proto; document.write("<INPUT type=button value='"+but_value+"' onClick=Connect(this.form,'"+but_type+"')>"); // </script>
    -->
    <script type="text/javascript">// Capture(share.ipaddr) // </script> IP Address: 
    192.168.15.2
    <script type="text/javascript">// Capture(share.submask) // </script> Subnet Mask: 
    255.255.255.0
    <script type="text/javascript">// Capture(share.defgateway) // </script> Default Gateway: 
    192.168.15.1
    <script type="text/javascript">// Capture(share.dns) // </script> DNS 1: 
    209.18.47.61
    <script type="text/javascript">// Capture(share.dns) // </script> DNS 2: 
    209.18.47.62
    <script type="text/javascript">// Capture(share.dns) // </script> DNS 3: 
    <script type="text/javascript">// Capture(share.mtu) // </script> MTU: 
    1500
    ifconfig:
    Last login: Mon Apr 26 19:42:20 on console
    Rick-Brakemans-macbook-5:~ Desktop$ ifconfig
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0<> mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::21e:c2ff:fe14:2031%en0 prefixlen 64 scopeid 0x4
        inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:1e:c2:14:20:31
        media: autoselect (100baseTX <full-duplex,flow-control>) status: active
        supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:1e:c2:a8:1f:fc
        media: autoselect (<unknown type>) status: inactive
        supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
        lladdr 00:1f:5b:ff:fe:1b:2e:c8
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>
    Rick-Brakemans-macbook-5:~ Desktop$
    cat /etc/resolv.conf:
    Rick-Brakemans-macbook-5:~ Desktop$ cat /etc/resolv.conf
    nameserver 209.18.47.61
    nameserver 209.18.47.62

  • Unable to connect to internet using DHCP with WRT54G behind ISA 2004

    Hello,
    For starters, the Linksys WRT54G is located behind the ISA 2004 Sever firewall. The gateway for the LAN and internet segment is set at 192.168.1.1 and 192.168.2.1 for the WLAN segment on the ISA box. All the proper network rules and access rules have been created. If I set the adapter card on the lap top with a static IP, e.g. ip address as 192.168.2.3, subnet mask: 255.255.255.0 default gateway: 192.168.2.1 and primary DNS: 192.168.1.1 the lap top can connect to the internet through the WLAN segment. At this point the WRT54G is set for internet connection type as automatic configuration DHCP, local IP address as 192.168.2.2 subnet mask as 255.255.255.0 and DHCP server disabled
    When using DHCP on the WRT54G by enabling it and setting the Starting IP address to 192.168.2.3, I cannot connect to the internet. When using the CMD prompt and doing a ipconfig /all this is the result
    I get       DHCP enabled: yes
                   Autoconfiguration Enabled: yes
                 IP Address: 192.168.2.3
                   Subnet Mask: 255.255.255.0
                   Default Gateway: 192.168.2.2
                   DHCP Server: 192.168.2.2
                   DNS Server: 192.168.2.2
    Is it possible to configure the WRT54G so that the default gateway can be set? Each time I change the Local IP address of the WRT54G e.g. 192.168.2.10, the default gateway gets the same IP address.
    Any help would be much appreciated.
    Thanks
    Karl

    In the 54g, setup an extra route to the other default gateway.
    ie; route 192.168.2.2 mask 255.255.255.2 gate 192.168.2.1

  • How on earth could I be connecting to the Internet through my airport express when it is not connected to anything?

    I'm not entirely displeased with the situation but I cannot see how I could be connecting to the Internet through my airport express when the Airport is not connected to anything.
    Weird huh?
    I have a separate non- Airport wireless network connected to the Internet.  I had previously set-up the Airport to link with this network but disconnected it (by resetting it) as music streaming was unlistenable due to frequent drop out.  I now just have the Airport Express as a standalone wireless network only connecting to the stereo to stream music from devices.
    My devices are only connected to the Airport network with cellular data off. Yet I can still connect to the Internet AND listen to streaming music (without drop-out no less).
    I don't want to fix it but I would like to know how the frag it could happen so i don't screw it up accidentally.

    I would say you still have something of the previous setup.
    To be sure you don't mess up, save the configuration.. go to the top menu area of the airport utility and export configuration.. which will land on your computer.
    Now you can recover at anytime to the current setup.
    How it works.. that is magical ..
    Open the airport utility.. edit.. and take a screenshot and post it of the following pages..
    Internet wireless network
    THen we can tell you how it is working.

  • I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

    I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

    Hi jenette,
    If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
    OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
    http://support.apple.com/kb/ht5019
    (Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
    Regards,
    - Brenden

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

    I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

    In order to download to your phone over the air, you need to be connected to WiFi.
    It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
    You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

  • How can I know which clients are connected to my network through express and which are connected through extreme?

    I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
    Here you can see both routers:
    I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
    Below, one can see the summary of the config for both routers.
    Would somebody explain it?
    Thanks,
    Marcelo
    Message was edited by: Marcelão

    please disregard this answer.
    Message was edited by: Marcelão

  • My ipod touch says that i am connected to the internet through settings but when i get on email or facebook it says no internet connection?

    My ipod touch says that I am connected to the internet through the setting tab but when i try to get on the internet it says no connection. I tried new downloads and updats and connectioning to other wifi in variouse places and still no luck.

    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset<Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Can no longer connect to internet wirelessly with Linksys WRT54G...

    Hi, all...
    I'm at my father-in-law's house. His home network setup is as follows:
    * Compaq desktop connected via Ethernet cable to
    * Linksys WRT54G, v3 (IP 192.168.2.1) connected via Ethernet cable to
    * Westell DSL modem provided by SouthEast Telephone (his ISP - IP 192.168.1.1)
    I set this equipment up for him about 18 months ago. His Compaq desktop connects perfectly to the internet, using the setup I described above, which I set up for him about 18 months ago. I *used* to be able to connect to the internet wirelessly (with both my IBM ThinkPad and my MacBook; my bro-in-law *used* to be able to connect to the internet wireless (with his Dell laptop).
    For reasons we don't yet understand, neither of us can connect wirelessly to the internet any longer. I have called Linksys, posted to their board, and read other threads here, so I am aware that MacBooks have some issues with Linksys routers. I'm getting ready to phone my father-in-law's ISP, to see if they can help.
    But... I don't understand why this used to work, but doesn't any longer. I would be very grateful for any help any of you great folks could provide, and I will gladly post here any detailed info on the setup that might be of help!
    Many thanks,
    Bill J.
    MacBook 2.0   Mac OS X (10.4.8)   iMac 17in Core 2 Duo 2.0, AirPort Extreme, AirPort Express, IBM NetVista M42

    Thanks for your reply.
    Actually the Linksys 2Wire modem works fine in OSX and when connecting via a Compaq PC I also have in the house. It is just on the MacBook running XP that it fails to "connect". XP see's the network but cannot connect.
    Also, I downloaded again bootcamp and created a fresh driver CD, reinstalled the driver and received the same error: 1706 No valid source could be found for product Macintoish Drivers foir Windows XP.msi.
    I looked at the directory on the CD and it appears that there are no driver files, only documentation.
    I called Apple, got no help, called Microsoft, spent 1.5 hours talking to them
    they were no help either.
    I sent a messge to the bootcamp beta mail address informing them that it seems the drivers are not being downloaded with bootcamp.
    Thx again.

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G?  My plan with was to go for wi-fi and connect to the internet through my iPhone 4.  Am I missing out on anything by not getting 3G?

    What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G?  My plan with was to go for wi-fi and connect to the internet through my iPhone 4.  Am I missing out on anything by not getting 3G?

    James9901 wrote:
    I tried the tethering and hated it. The connection breaks every time I get > 25 feet from it and it's a pain to reestablish the connection. I suppose if I had to choose between breaking connections every now and then or paying another $100 + $25/month I'd do the tethering.
    Or just carrying the phone in your pocket? Just saying.....

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Not able to connect with Oracle server through VBScript without DSN

    Hi
    I have both Oracle9i and Oracle10g clients installed with local system.
    I am able to connect to Oracle Database 11g Enterprise edition server though sqlplus through command prompt and also through AQT without any error.
    As the server has lots of database ,whenever I connect to a particular database through sqlplus from command prompt,I connect as below
    C:>sqlplus username/password@service_name
    and it gets connected without any error.
    When I am trying to connect the same database through VB Script,I am getting ORA-12560 TNS:Protocol Adaptor Error.
    Below is the connection string I am using:
    Database_String = "SERVER=xxxx.vvvn.Com;Driver={Oracle in OraHome92};DATABASE=service_name;user id=userid; password=passowrd"
    I have installed a Oracle10g server in my local system and tried to connect the same way and I was successfully ,but its not working when the server is running remotely.
    Does it make any difference with the version of driver being used ?Should I need to modify my connection string anyway.
    Please help me as to identify the issue.Thank you very much in advance.
    Regards
    Sahina

    check the listener status in server end,
    lsnrctl status
    lsnrctl servicesif not start
    lsnrctl startThanks

Maybe you are looking for

  • Is it really your video card that's the problem?.

    Bought a DC/2.3 G5 to run Aperture, upgraded to 1.1 and everything became slow, got a 7800GT, not a huge improvement. Upgraded to version 1.1.1 with some improvement, now at least it's usable. Got a new MBP 17in with 2Gb ram and a fast(7.2k) disk, sp

  • DNS discovery and option 43 in DHCP which is prior

    We have both DNS  and Option 43  contorller discovery ways in one network but they direct to different WCL . I just want to know which one is more aggressive to advertise the IP address of controller. thank you in advance.

  • MS SQL to Oracle Problem:  nvarchar's being loaded as null varchar2's

    If anyone has any insight into this, I would really appreciate it. I'm trying to build an incredibly simple Interface that mirrors a small MS SQL Server table into and Oracle table. The source MS table is a series of int, smallint, numeric, datetime

  • What is default web access password for HP Laserjet P2055dn

    I tried to logon to the printer's web access interface, but do not know the username and password. I need to know either the default username and password, or how to reset it to the default. Thanks,

  • Need assistance editing a scanned document

    I am trying to edit a scanned document however it keeps saying it is to large.  My page is 36x24 and it wants me to crop it but I can't I will lose important information.  Any help would be appreciated.