Connect to a local server whilst using VPN

I have SABnzbd+ running on my MBP.
Since my Linksys WAG320N router supports NAT Loopback, I can connect to it's web UI using my local IP, 192.168.0.2 OR my ISP-assigned static IP, 72.xxx.xxx.xxx.
However when I'm connected to the VPN, using OpenVPN & Viscosity, I can't connect to the SABnzbd+ server on either address.
I tried setting up DynDNS with their auto-updater, and using a host name instead of IP address, still no luck.
I use SABnzbd+ as an example, it's the same problem with ANY locally runnining server (uTorrent UI, etc).
Thanks

I use the built in VPN for company access. However, by default it "sends all packets to VPN route", which I do not like. I put together a script to set only the networks I need to go through that route using the "route add" comment. I set my default route whatever my ISP default route is at the time of my connection. This allows me both worlds (vpn connections and internet). Not sure if that helps you or not.

Similar Messages

DTW error when connecting to my local Server

I am trying to use Data Transfer Workbench to upload data to a new company in my local server.. I am only able to connect with our centralized server and not with the local server in my system.. if i try to connect to my local server, it is showing the following error.
Based on the previous threads.....I have checked in the license manager, the server is correct only and the encryption key type is static.
I also tried changing the encryption key to dynamic, then when i login to sap.. it is showing as
when i give Yes... I get the following error.
I am not able to move forward... Kindly suggest any way to solve my issue..
All help will be greatly appreciated.
Thank You

Hi San Xu
Thanks for trying this out..
The problem here was that.. the particular user did not have the license.. so changed to a user with license and now able to connect with DTW..
Thank You

Connecting to a sql server database using netbeans 5.5

hi all
if you please could any body tell me detailed steps for establishing a connection to a sql server database using netbeans 5.5
i need to know what driver to use and the format of the url i use in making a new connection
thanks

Uhm SQL (Structured Query Language) is like the base
of all other type like MySQL and Oracle. Um, given the context I think the person was referring to "Microsoft SQL Server". Sometimes people will cut to the chase and refer to the product as "SQL". At those times it's understood by all parties that we're not talking about the query language, rather the Microsoft product.
I think this is one of those times.
See
something i found in two seconds with the wonder of
google http://sqlzoo.net/ & http://sqlzoo.net/w.htm
It's commendable that you're using Google. I'd argue that the OP should be making better use of it, too. But I don't think your response is applicable to this context. JMO, of course.
%

Probem connecting a server when using VPN

Hi,
I am new to Linux. I installed a new Oracle Linux server and was able to connect to it from my laptop using putty when I am inside my office. I have static IP on the linux server and everything seems to work fine when I am in the office.
However, when I work from home using VPN, I am having problem connecting to the Linux server using putty. I got timed out.
How do I troubleshoot this issue?

Eski wrote:
I don't have any firewall on the server
So you think the only place for a firewall is on your server?
see this:
[root@poc2 network-scripts]# service iptables status
Firewall is stopped.
It's not a firewall issue. I beg to differ. You are going through a network that has multiple firewalls. You probably have a home router, and that probably has a firewall implementation. Your ISP most certainly has multiple firewalls, as does your company system at the other end of the VPN.
Where can I check next? (I don't have a network admin support. This is my POC proof-of-concept project.)If you are using a VPN, then you have a network admin somewhere at the other end of that VPN and it appears he/she is in your own company. What prevents you from talking to him? Certainly it's not because you are trying to secretly circumvent your company's security to do your POC project?
Edited by: EdStevens on May 18, 2013 3:33 PM

No contact with DHCP server when using VPN Client

Pretty weird problem I discovered recently.
We use the VPN Client to connect to a 1841 router. Everything works fine except for one small thing.
The client do not send out _any_ traffic if the destination is the ip-address of the DHCP-server the client got its original ip-address from.
This is verified by Wireshark. A ping on the client do not produce any ESP packets towards the VPN concentrator. No matter what traffic you try actually.
Discovered this when wanting to use Remote Desktop towards the Windows Server that is the local DHCP server and was not able to connect. Then tested ping and still no response. That made me look closer and found out that I could not communicate at all with the DHCP server.
As I said, pretty weird.
Anyone else have seen this? Anyone have a solution? Right now I use OpenVPN instead when I need to control that server.
- Roger

Hi and thanks for responding.
Nothing here apart from being unable to send any packets to the dhcp-server. No problem sending to any other system on the same subnet. The same happens when I connect my pc to another subnet that is served by another dhcp-server. Then I can not connect to _that_ dhcp-server. I can then of course connect to the previous dhcp-server.
I mean _no_ packets are generated out the client at all if the destination are your dhcp-server. No problem with the packet being blocked by a firewall or anything like that. Ping another system on the same subnet as the dhcp-server and the client happily generates ESP packets and sends them to the vpn-concentrator.
I do not know if it was clear enough in the first post so I am saying it here: the vpn-concentrator gives out the ip for the vpn connection. The dhcp-server I can not connect to is the server that gives the client its ip-address _before_ starting up the vpn client.
We use this vpn system so the IT personell will be able to connect to restricted resources from their laptops anywhere in the network, also when using wireless.
This was discovered when one admin wanted to connect from his laptop to a server that also happened to be the dhcp-server that had given his laptop his ip address before he used vpn.
Should be easy enough for anyone else to test. Just ping your dhcp-server after starting the vpn connection. No RFC 1918 addresses of course, there must be a route from your vpn-concentrator to your dhcp-server and at least icmp echo must be open through any firewall/acl.
The vpn version is 4.8.00.0440 on Windows XP configured to not allow local LAN access. I might test this with other versions/OS'es when I have the time.
Regards,
- Roger

How to set up local server to use a remote server for login authentication?

Thank you in advance for any help you can offer.
We are trying to set up a "sub-network" (dont' know if this is the right terminology) using a 10.4 Server OS, to manage a set of clients... the trick is that the client login/home directory information is on a different remote server, and shall remain there, for the most part.
To make it easy to understand here's the environment:
*Local Server:* 10.4 G4 Server Quicksilver 1G dual--we have total control of this one
*Main/remote server:* 10.5 Xserve.. don't know which vintage--we have very very very little input on this machine.. effectively at the mercy of the sysadmin of this system who is very conservative in changing anything (hence the need for a separate server to install applications and client machine-specific profiles, etc since the Xserve admin refuses do it). This serves MacBooks/MacBookPros and few iMacs. (no Windows PC.. as that group of comptuers have their own server)
client: ~20 eMacs/iBooks all running 10.4.
use environment: elementary school-->very low network demand (no e-mail, just running local apps linking to server(s) for licensing and login, and some file saving small files on remote server, user preferences, etc).
The remote server (the Xserve) has all the login authentication, as well as the home directories. every school year, the directories get updated as new students enroll and old students graduate. Currently all the clients are directly linked to the Xserve via LDAP while we bring the local server on-line.
the local sever (our G4 Quicksilver) will have few network applications that will support the client machines. We also will be setting up computer accounts and groups for our clients so that we can properly set their environments (the Xserve admin will not do this on the Xserve, so currently all the clients are connecting to the server as a "guest computer" from what little I understand watching what was done)
now, what is the best way to approach this type of set up with minimal "inconvenience" of the Xserve admin?
I am pretty experienced with standalone UNIX and macOS X administration, but a novice to this whole Server and network setup thing. Any suggestions, instructions, pointers to URLs with how-tos is much appreciated. I am not afraid to use Terminal (grew up on UNIX before GUI), etc., and willing to try safe but unconventional setups if that is what's needed...
thanks for any help!

Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...

Is it possible to connect labview with opc server without using NI dsc Module ?

Hellow sir,
I want to get data over labview using OPC server and i am not using any dsc module vi (Alams, print, GUI, security).I am using share variable to get data from OPC server to labview. Now i want to deploy that application to third party computer. (where there is no NI software is installed)
i am using labview 8.6 and 2009.
Many ? like....
1) what is the procedure to install that application in third party computer.
2) Do i need to use my dsc run time licence..?
waiting for your valuable feed back.
Thank you.
CLAD
Labiew programmer

Hi, When you connect to NI OPC Server by creating New I/O Server > OPC Client. You will see all registered OPC Servers running on local machine or remote machine. I used KepServerEx from Kepware and LSIS OPC Server from LG with no problems. Just make sure that the OPC server is running.
Hope it helps
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Attachments:
LG.png ‏57 KB

Connecting to my local server? Please Help

Hello,
I have Wamp setup on my computer to test some database work I
am doing.
I have been able to connect to databases on my hosting
service but need to do some local testing.
Through many post on WAMP forum I have had no luck in finding
out why I can not connect to my server though Dreamweaver to my
database.
I follow all the instructions I think but I must be missing
something.
Config:
I do have Mcfee (bummer I know) with firewall but it says it
give full access to WAMP. I have even disabled it and tried.
I do not have Skype or IIS running or installed.
I only have apache installed once as far as I can tell.
I have password and name "root" setup.
I have databases built in my www folder.
All services are running in WAMP.
I try to connect though the normal Dreamweaver way.
>>Applications >>Databases>>My SQL
Connection>>
I input:
Connection name: DBCart
MySQL Server: localhost
Username: root
Password: mypassword
Hit the select button and get:
1)There is no testing server running
2) The testing server specified for this site does not map to
http://localhost/wamp/www/dynamicCart/test/_mmServerScripts/MMHTTPDB.php
URL.
Verify that the URL Prefix maps to the root of the site.
I have site set up :
Local root folder;
C:\Program_Files\wamp\www\dynamicEcart\Starting_Points\
Images;
C:\Program_Files\wamp\www\dynamicEcart\Starting_Points\images\
HTTP address:
http://localhost/wamp/www/dynamicEcart/Starting_Points
ALSO tried leaving this just at local host no luck
Testing Server;
Server Model; PHP Mysql
Access; local
Testing Server Folder:
C:\Program_Files\wamp\www\dynamicEcart\Starting_Points\
URL Prefix;
http://localhost/wamp/www/dynamicEcart/Starting_Points/
PHPMyAdmin info:
User: root
Host : localhost
Password :Yes
Global privileges : ALL PRIVILEGES
Grant : Yes
Please please please somebody walk me through this.
I have been trying for days.
I need to test my shopping cart.
I have even tried on my laptop with wamp and Dreamweaver and
can not connect.
It must just be something simple I am missing.

Ah Ha,
I figured it out.
I checked the Apache error log and saw that it was looking
for _mmServerScripts.
The file for my site was to deep in the www directory (to
many sub files). I moved it up so that apache could find the
_mmServerScripts and bingo I am golden.
I hope this helps anyone who runs into a similar problem.

How to get Connection string for Sql Server Installed ( using Gallary ) on Azure VM ?

Installed Azure VM From gallary with Sql Server 2012, even after allowing 1433 port through firewall, still cant get access to Sql Server from outside vm, So please provide steps for getting exact ServerName for connecting Sql Server on VM for connecting
from Visual Studio Application.
Thanks.

Hi,
You can check the DNS name of the VM in the VM instance page of the Azure management portal.
In addition, you can also refer to the third-party article below:
http://thomaslarock.com/2014/02/connect-to-a-windows-azure-vm-using-sql-server-management-studio/
( Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.)
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Connecting to a local server using simple finder

I am switching all my iMacs to OSX v10.2. I was told that it would run better for me than OS 9.2.
When setting up user capabilities for my students, I am having some troubles. One, if I set it up where my students can view only applications that I want, they do not always appear under the student login.
If I set it up where my students can only use simple finder and view an applications folder, then they lose the capability to see the local network servers.
Is there anyway to set it up for users to still use a local network server when only using Simple Finder capabilities?
If anyone could please help, it would be greatly appreciate.
Thanks,
Steve

Check
1.connect to db using remote desktop
2.check v$session for info
3.Terminate the desktop connection
4. check the v$session view

How can I see shared review comments in a PDF when connected to a SharePoint server over a VPN?

I am using Acrobat Pro XI on Windows 7.
When I issue a shared review, hosted on our work SharePoint server, I always encounter problems when accessing my work network from home, over a VPN. My comments do not get published, and I cannot see comments that reviewers have published.
I issue the review PDF as an attachment when I open the review, and all reviewers save a local copy of this file. When I open the PDF, the "Welcome back to shared review..." screen is never updated with the number of comments. The server status always seems to show green, but the comment reporting mechanisms do not behave as they do at work. When I click Publish comments, I am usually asked if I wish to take ownership of unpublished comments by other reviewers (to which I click No). When I return to the office, everything seems to "just work" again. But this is hugely inconvenient if I am out of office for days on end.
I had this problem with my previous version of Acrobat, and no satisfactory solution was ever reached. I am most dismayed to find it is still present in version XI.
Please can anyone advise?

I don't know if you solved this issue yet. But we have the same issue in the pass, and clean the log files under "\Synchronizer\resources\" folder seems to be a solution. Here is the thread talking about it.
https://forums.adobe.com/thread/1426298?start=0&tstart=0

P6 Web Access connection to MS SQL Server database using TCP Dynamic Ports

Hi,
I am attempting to install P6 Web Access. When I run the installation and do the database configuration I am required to input a port number into the Database Host Port field. I do this and no error is displayed graphically, but I get a connection refused error when I look in the web access log.
"com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect "
The dba is running the database on an sql server farm and does not want to apply a static tcp port to the Primavera database as this will interfere with his other databases.
The fact that it appears to be mandatory to input a host database port during database configuration, has me thinking that P6 Web Access requires that the database be set up with a static TCP port? Is this correct?
I searched the documentation about this but came away with nothing...
any help would be truly appreciated.
Andy

At my previous company we experienced a similar issue with P6 Web. Our P6 database was hosted on an Oracle RAC and when configuring the Web connection I was forced to point it to a single RAC server rather then allow it to utilize the cluster. If you have found a resolution to this I would be interested in hearing about it.

Defining a non local server for use within the IDE - version9.2

How do I add a server that's running on another machine to one that my
workshop is running. When I invoke the New Server dialog and modify the
host from localhost to the one on which the server instance is running, then
everything is blanked out and I can't do anything. I can't find anything in
the documentation that tells me how to do this.
Thanks,
SB

While deployment can be done manually, it is possible to run and debug a
server remotely.
For an example on how to do things remotely, see Chris Hogue's blog:
http://dev2dev.bea.com/blog/hogue/archive/2006/09/debugging_remot.html
Could you send me info on your environment? broth at bea dot com, and I
will try and get you some answers. This sounds like a requirement we need
to meet.
br
Stanley Beamish wrote:
How do I add a server that's running on another machine to one that my
workshop is running. When I invoke the New Server dialog and modify the
host from localhost to the one on which the server instance is running, then
everything is blanked out and I can't do anything. I can't find anything in
the documentation that tells me how to do this.
Thanks,
SB

Unable to connect to local server

Folks:
When I tried to access an older Mac running Leopard (10.5.8) from my MacBook Pro running Mavericks (Finder: Go: Connect to Server: LocalServer), I was unable to connect and received a message,
'There was a problem connecting to the server "LocalServer". The server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
I tried deleting any keychain refrerence to local computer.
I tried deleting the list of recent servers from the Finder.
I tried restarting both my laptop and the local server.
Nothing,
There is a local server icon under the "Shared" section of the sidebar of the Finder browsing window. I can find no way to delete this listing.
I can access the the Mavericks MBP from the old Leopard server via remote login, but I was unable access the old Leopard server from the new Mavericks running MBP.
I finally achiveved access by
1) Turning on SMB sharing for my account on the local server
System Preferences: Sharing: File Sharing: Options: SMB Sharing: MyAccount then storing my password.
2) On my MBP, connecting via smb.
Finder: Go: Connect to Server: [Enter smb://Localserver.local]
It finally worked, BUT … after successfully connecting to the local server, I now have TWO listings for Localserver in my Finder browser window, the live link and the old link which still says "Connecting."
I can't figure out how to get rid of the earlier afp link, OR how to make it work. I would prefer to use AFP as the SMB notation from both computers indicates that the storage of my password is not as secure.
Restaring the computer doesn't help.
I had a similiar problem when I upgraded to Mountain Lion, and I tried many of the same tricks to no avail. That problem seems to have fixed itself.
Anybody have any bright ideas?
Thanks much.

I should have been more clear. This is on an 8-core Intel XServe.
I was able to use Server Admin locally on the machine for weeks. Now I can't. Nothing has changed or been altered on the machine during that period.
I can not connect to the server via Server Admin remotely or locally. I can connect via SSH, ARD, etc. and the system is still serving NFS just fine, so it's just the process that handles communication with Server Admin that is non responsive.
Something interesting from the syslog:
qt1 servermgrd[44258]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
qt1 servermgrd[44258]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null) , error = Error Domain=com.apple.OpenDirectory Code=2000 UserInfo=0x1066a16c0 "Unable to open Directory node with name /LDAPv3/127.0.0.1."
qt1 DirectoryService[31]: DirectoryService has 42000 internal references open (due to clients), warning limit is 2000.
These lines repeated apprx. every 30 secs until I bounced the servermgrd. Now, I see that entry whenever I try to connect to the local server via Server Admin.
Now, this system is not a LDAP server, but I understand OSXS still uses LDAP for local directory info... I've tried restarting the related directory services as well, but still no joy.
It looks like my only recourse is a reboot, which is really not a great option for a dedicated file server. Am I the only one who has ever encountered this issue of Server Admin eventually losing contact with a server?

Connecting to a local SQL server .mdf file

Hi all,
In doing some prototyping of my database I started working with a local copy of an SQL Server database since it so conveniently integrated with the Visual Studio .NET tools I use. Now that I have spent far too much time working on a local prototype, I would very much like to migrate it to our in-house database rather than rewrite the whole thing (it is quite large in terms of tables and constraints and none of our in-house tools generate code from ER diagrams).
Seeing that SQL Developer had a migration utility I pounced at a chance to use it. I installed it as well as the recommended JDBC driver; however, it occurs to me that I have no idea how to connect to a local database file using the host name and port fields given to me. Is there some convenient way to configure SQL Server 2005 to forward this file to some kind of local host? Or is there any other driver for use with a local .mdf file? Help would be greatly appreciated.

While it does come with a copy of SQL Server with it, visual studio suspiciously just asks for a file name, so I would assume it reads directly from the .mdf
I have a copy of SQL Server 05 on the machine, but I haven't done anything in the way of server side configuration before, so I can't even guess how to direct it to serve the file.
All software packages involved are:
Windows XP
SQL Server 2005
Visual Studio .NET 2005
SQL Developer 1.5.1
Oracle client 10g connecting to an Oracle 9i release 2 server
Any pointers to the right direction or alternate migration solutions would be great.
Edit: I am highly suspicious that Visual Studio was connecting to this file through SQL Server Express and not my standard edition copy, and it is therefore not attached to the database, the solution is not looking entirely easy, so an alternate migration may be a better choice. Thanks in advance for any help.
Edit: Well my suspicions were confirmed. I attempted several solutions. First of which being the MS SQL Express publishing wizard so that I could publish to SQL and run the script via Toad or SQL Plus; however, it only targets MS SQL Server 2000 or 2005 which would result in a lot of hand editing in terms of migration. Attempting to find a script converter did not help as they all either failed outright or demanded a connection to the datbase via ODBC or JDBC (which doesn't support SQL Express' less than clever attach on connection ideas). This led me to the alternate solution of trying to attach the file to my main database and connect to it; however, the SQL Server command prompt has some sort of permissions issue with my office security setting (though I can edit files fine) and results in failure.
I think it is about time to throw in the towel and just work it out by hand. This would be greatly expedited by any visual database tools that generate code from ER diagrams if you happen to know of a freeware solution. We lack an internal copy of Oracle Designer and the free license only permits a single prototype. So any suggestions on the front of freebie visual object relational tools and alternate migration ideas would be of great help. Until then I'll be grinding through it with moderate dissatisfaction.
Thanks again.

Connect to a local server whilst using VPN

Similar Messages

Maybe you are looking for