Connect to a USB AIO on another computer... and use it to scan
So this isn't a printing related question, but there's an iMac in the office that has an HP 3055 AIO attached to it. I can print to it perfectly fine (as printer sharing is enabled on the iMac and we connect to the same router and stuff) but scanning is a bit of an issue. What I want to do is put a stack of stuff on it, and scan the images into my MacBook. But, when I open HP director, I can't connect to it.
Anyone have an idea of how to do this? I can't even get to the configuration tab to enter in the IP of the iMac, so this is vexing to me.
Thanks!
You cannot use the scanning function on most AIO's and scanners when they are shared by another Mac (or PC). The software hasn't been designed to work for this type of connection. You will have to scan to a shared folder on the iMac and then copy the files across the network.
Similar Messages
-
So, my phone won't connect to my mac computer when I plug the USB charger into my computer and then into my phone it won't charge or connect. How should I fix this?
Test with another computer and another cable
To discover if the problem is eith the phone the cable or computer -
I bought my own laptop (Macbook Pro) and set it up and am using wifi that my parents use on their computer. Everything was working great until I wanted to put my itunes from the desktop to my laptop. I used my Mom's sign on of her apple id and since then when I log on to my laptop it says another computer is using my ip address...what do I do? Thanks!
Hey there Toni D.,
I suggest the troubleshooting outlined in this article here:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Does the symptom occur with more than one Wi-Fi device?
Wi-Fi issues may be related to the network in question or they may be related to the Wi-Fi computer joining that network. Usually, if other computers or devices (such as the Apple TV or iPhone) are able to get on the Internet without issues, then your Wi-Fi router is probably fine.
If you only have one Wi-Fi device, proceed with this article.
Make sure your software is up-to-date.
Install all software updates available for your Mac.
If you use a third-party Wi-Fi router, check with the manufacturer to confirm that it has the latest firmware installed. If an update is available, follow the manufacturer's instructions for updating the firmware.
To determine if your Apple Wi-Fi base station firmware is up-to-date, see Updating your software.
Check your connections.
Some networking issues may be caused by loose or disconnected cables. Verify that all Ethernet and power cables connected between your modem and your Wi-Fi router are correct. Checking that devices such as your router and modem are on, disconnecting and carefully reconnecting Ethernet cables, and/or replacing damaged Ethernet cables may resolve the issue without any further troubleshooting.
Verify that you are using the recommended settings for your device.See Recommended settings for Wi-Fi routers and access points.
Restart your network devices.Powering your modem or router off for a few seconds and then on again may resolve network issues without any additional troubleshooting. If you have phone service through your ISP, power cycling your modem may interrupt that service. You may need to contact your ISP in order to restore your phone service if your modem is reset or powered off. Ensure that you have alternative means to contact your ISP (such as a cell phone) to avoid unnecessary delays in restoring your Internet or phone service
And if this does not get the network connection going again I would use the troubleshooting from down the bottom in the section labeled Symptom: My Mac does not connect to the Internet.
Take care,
Sterling -
Deauthorizing iTunes on a computer? My laptop won't let me connect my iPhone because it says I'm authorized on too many computers, but when I try to de-authorize another computer I use it won't let me. What's up?
What do you mean it won't let you? What exactly does it say? (Sorry to sound so exasperated but this is like the 6th post in a row where people have made vague statements which do little to help us find solutions without a game of 20 questions.) I'm going to guess and say you can only deauthorize a computer to which you have physical access or VPN login. The alternative is to deauthorize all which you can only do once a year.
-
I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick
You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
-
I plugged in the USB cable into my computer and my ipod is does not show that it is connected what do I do?
See:
iOS: Device not recognized in iTunes for Windows -
so i connected my ipod shuffle to my apple computer and the status light on my ipod shuffle shows that it is charging but when i look for it on the pc dock or in itunes it doesn't show it at all.... so what do I do???
If you have not already, I would shut down (power off) your computer. Do this to Reset your shuffle
http://support.apple.com/kb/HT1655
Start up computer. Run iTunes. Connect shuffle.
If you have added a new USB device recently (since the last time it worked properly), you may want to try disconnecting it to see if that makes any difference. -
what does the error message that says " You are logged out because another computer is using this IP address." mean?
Some other piece of network ghardware on your home LAN (Local Area Network) is using the IP address your Mac is trying to use.
Reboot both your modem and router, or the Modem/Router combo box you have, and all pieces of networking equipment, computers and printers, you have connected to your LAN.
If you continue to get that error then it is a bug in OS X or you have your Mac set to a Static IP address that is being handed out by the routers DHCP server to some other device. -
i had firefox on another computer and i would like to import all my saved bookmarks to my new computer how do i go about it ?
Bookmarks > Organize Bookmarks -> Import & Backup - Export HTML... - to a USB stick <br />
''then on the new PC, in Firefox'' <br />
Bookmarks > Organize Bookmarks -> Import & Backup - Import HTML... - from file on that USB stick -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
Wireless printer won't print my document because it another computer is using the printer
Canon MG5520 wireless printer will not print - message another computer is using the printer. No other computer is using the printer. I do have an IPAD and I did use it to print and it printed. It seems since I printed from the IPAD I am unable to print from my laptop.
Hi paspies65,
Reinstalling the drivers and software on your printer using the latest drivers from the Canon USA website should resolve the issue you are experiencing.
Please click here to go to the Drivers and Software page for the PIXMA MG5520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click on the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to reinstall it on your computer. This will reinstall all drivers and software for the printer on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I uploaded music to my MacBook and I went to open my iTunes account on another computer and could not access them. How do I do that?
Welcome to the Apple Community.
The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer -
I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?
Yes
-
My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.
Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
If not, please try searching the forum. This has been addressed hundreds of times here. -
My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?
bring it to Apple for battery diagnostics.
Maybe you are looking for
-
Hi Folks, I have just downloaded Mountain lion on my Macbook Pro(haven't installed it yet) . My question is, can I copy the same downloaded Mountain Lion from the Applications on to an external hard drive and use the same on a different computer? I
-
OEM 10G can manage databases oracle 8.1.7 / AIX 4.3.3
I'm installing OEM 10G on my desktop (windows 2000) i'm cannot add hotes or cibles, oem 10g said "installing oracle management on computer hote" and my databases are oracle 8.1.7 platform aix 4.3.3 . How do for managed databases ? Thanks
-
Balance sheet Open Item Analysis (FAGLF101)
HI, When I run this transaction, I am getting the error message "Account determination for transaction V05 not maintained for account 123456". But in fact the account determination was maintained in OBBV. Actually I am new to new GL. This error messa
-
Dear Experts, I have a scenario where in for a PO i will open LC aginst my Vendor in Bank & i paid some bank charges to bank . My PO is 100Rs and Bank charge is 20Rs & Total is 120Rs which should add to my material cost. this is getting add while pos
-
Is phone signal seperate from data or do I have to have date turned on to keep my phone signal
I leave my data off, due to being a new iPhone owner and worrying about charges. Twice my phone service dropped to "searching". The AT&T store said that the phone is defective as phone and data are to separate functions of the phone, person at the he