Connect to B1i server failed - HTTP/1.1 404 not found

Hi All,
I currently have B1 8.8 PL14 installed and in the process of installing B1i when  I get to Step 3/5: Configure B1i Parameters and select Test Connection I get the error message 'Connect to B1i server failed - HTTP/1.1 404 not found'. I have followed. I have undertaken the installation as per the recorded session by Benno Eberte and regrettably I cannot set a successful connection.
Can anyone assist?
Best regards
Earl

Hello,
personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-8012) Company version mismatch
{b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
Hope it helps
Kind Regards

Similar Messages

  • HTTP Connection to R/3 System error- HTTP/1.0 404 Not found

    Hi,
    I am using a HTTP connection to XI to extract data from R3 to XI. The HTTP connection I have created in R3 are getting an error - "HTTP/1.0 404 Not found" while testing the connection.
    Porperty maintained in the connection:
    Terget host = <XI server address>
    Service No = 8000
    Path Prefix = /sap/xi/engine/adapter_plain?
    The exchange profile in XI (PI 7.0) system is as follows:
    com.sap.aii.connect.integrationserver.r3.httpport = 8000
    HTTP port is set as 8000 in SMICM services.
    The same type of connection is working fine in the lower PI and R3 environment but failing on productive  system.
    Thanks for your help.
    Regards

    Hi,
    Well... you are trying to configure a HTTP RFC destination in SM59, aren't you?
    Dont worry about that. It is just a warning. Click on return or space bar after typing path prefix.
    Then save and test the connection.
    Carlos

  • Application Server Console returns EMDAEMON HTTP 1.1 404, Not Found

    Hello,
    Windows XP
    Version 10.1.2.0.2
    When I try to access the AS Console through the following URL:
    http://192.168.1.100:18100/emd/console/
    I get the following error:
    EMDAEMON
    HTTP/1.1 404 , Not Found
    But I'm able to access AS Portal through the following URL:
    http://192.168.1.100:18101/emd/console/
    I'm able to access all the other following URLs:
    http://192.168.1.100:7777/
    http://192.168.1.100/portal/page/portal/TOPLEVELSITE/Welcome
    http://192.168.1.100:5500/em/console/
    http://192.168.1.100:7777/oiddas/
    I think the port number is messed up somewhere and I'm not sure how to correct and get the AS Console working again.
    emctl status iasconsole gives:
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://192.168.1.100:18000/emd/console/aboutApplication
    Oracle Enterprise Manager 10g Application Server Control is running.
    emctl status agent gives:
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Agent Version : 10.1.0.4.2
    OMS Version : Unknown
    Protocol Version : 10.1.0.2.0
    Agent Home : D:\oracle\appserver\OraInfra
    Agent binaries : D:\oracle\appserver\OraInfra
    Agent Process ID : 3728
    Agent Process ID : 3728
    Agent URL : http://192.168.1.100:18100/emd/main/# MEDIUM if number of ta
    rgets is from 11 to 50.
    Started at : 2008-01-06 20:16:23
    Started by user : SYSTEM
    Last Reload : 2008-01-06 20:22:01
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 78.03%
    Agent is Running and Ready
    It would be helpful if someone can guide me in the right direction. Thanks for your time.

    Hello, thanks for the input. Running in separate boxes is not a viable option at this point. I tried to update the iasconsole and agent ports based on the document here:
    http://download.oracle.com/docs/cd/B14099_07/core.1012/b13995/ports.htm#i1038847
    So I used the following commands to update the ports:
    emctl config agent port 18139
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Oracle Enterprise Manager 10g Agent configuration update succeeded.
    emctl config iasconsole port 18119
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://192.168.1.100:1156/emd/console/aboutApplication
    0 [main] ERROR emSDK.config - java.util.MissingResourceException: Can't find bu
    ndle for base name oracle.xml.mesg.XMLResourceBundle, locale en_US
    java.util.MissingResourceException: Can't find bundle for base name oracle.xml.m
    esg.XMLResourceBundle, locale en_US
    at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle
    .java:839)
    at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:808)
    at java.util.ResourceBundle.getBundle(ResourceBundle.java:579)
    at oracle.xml.util.XMLError.getMessageBundle(XMLError.java:500)
    at oracle.xml.util.XMLError.alloc(XMLError.java:508)
    at oracle.xml.util.XMLError.getMessage0(XMLError.java:419)
    at oracle.xml.util.XMLError.error0(XMLError.java:310)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
    ngParser.java:318)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
    arser.java:281)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:186)
    at oracle.sysman.emSDK.conf.TargetInstaller.parseTargetFromFile(TargetIn
    staller.java:1747)
    at oracle.sysman.emSDK.conf.TargetInstaller.modifyTargetFromFile(TargetI
    nstaller.java:1294)
    at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:36
    86)
    16 [main] ERROR emSDK.config - java.io.IOException: Error parsing target from f
    ile D:\oracle\appserver\OraInfra/sysman/emd/iasTargetMod.xml :: Can't find bundl
    e for base name oracle.xml.mesg.XMLResourceBundle, locale en_US
    java.io.IOException: Error parsing target from file D:\oracle\appserver\OraInfra
    /sysman/emd/iasTargetMod.xml :: Can't find bundle for base name oracle.xml.mesg.
    XMLResourceBundle, locale en_US
    at oracle.sysman.emSDK.conf.TargetInstaller.parseTargetFromFile(TargetIn
    staller.java:1760)
    at oracle.sysman.emSDK.conf.TargetInstaller.modifyTargetFromFile(TargetI
    nstaller.java:1294)
    at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:36
    86)
    Error parsing target from file D:\oracle\appserver\OraInfra/sysman/emd/iasTarget
    Mod.xml :: Can't find bundle for base name oracle.xml.mesg.XMLResourceBundle, lo
    cale en_US
    Oracle Enterprise Manager 10g Application Server Control configuration update fa
    iled.
    When I looked at iasTargetMod.xml the file is empty (0 KB size).
    After Starting the Application Server Control, I checked the status of both iasconsole and agent and are as follows:
    emctl status iasconsole
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://192.168.1.100:18119/emd/console/aboutApplication
    Oracle Enterprise Manager 10g Application Server Control is running.
    Logs are generated in directory D:\oracle\appserver\OraInfra/sysman/log
    emctl status agent
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Agent Version : 10.1.0.4.2
    OMS Version : Unknown
    Protocol Version : 10.1.0.2.0
    Agent Home : D:\oracle\appserver\OraInfra
    Agent binaries : D:\oracle\appserver\OraInfra
    Agent Process ID : 8176
    Agent Process ID : 8176
    Agent URL : http://192.168.1.100:18139/emd/main/# we can set it to 0 to
    use the OS default value.
    Started at : 2008-01-08 00:13:53
    Started by user : SYSTEM
    Last Reload : 2008-01-08 00:13:53
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 78.00%
    Agent is Running and Ready
    I also checked the following:
    emctl config listtargets
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    [192.168.1.100:18139, oracle_emd]
    [192.168.1.100, host]
    [orcl.168.1.100, oracle_database]
    [LISTENER_192.168.1.100, oracle_listener]
    After all this, I went to this URL:
    http://192.168.1.100:18101/
    - and logged in as ias_admin. The name for Infra and Portal are as follows:
    infra.192.168.1.100
    PORTAL.192.168.1.100
    When I clicked on infra.192.168.1.100 I get 'Internet Explorer cannot display the webpage' error.
    But when I click on PORTAL.192.168.1.100 everything is working and the status of all the components are up.
    I'm not sure how I should proceed at this point. Any pointers would be helpful. Thanks!!

  • Received HTTP response code 404 : Not Found

    I am attempting to pass a file through XI into an IDoc to ECC.  I have tested the mapping, and that works fine.  I have also tested the configuration in the integration builder and it seems to be fine.  However, when the file is picked up by XI from the directory, processed by XI, and then sent to ECC, an error occurs in the runtime workbench:
    Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    The error leads me to believe that the system cannot be found, or there is a privelage issue with the service user attempting to log onto ECC.  However I believe I have set up the RFC connection correctly, and the service user should be fine.
    Does anyone know what may be causing this?  I am using the IDoc adapter for the reciever communication channel.  I have set the RFC destination (and tested it in SM59, works fine) and the port (I assume this is the port in WE21?).  Not sure where to look...

    Being that the error says:
    Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    I am trying to understand what this means.  Can anyone explain to me why the message is getting sent to this address?  I assume that the AFW is coming into play because I am using the IDoc adapter, hence the adapter framework.  Is this true?  Should the AFW be showing up, or do you think there is another issue?
    Mainly I want to know if this is more of a basis issue, or a configuration problem with the interface in XI?

  • RecoverableException: Received HTTP response code 404 : Not Found

    Hi All,
    I am getting the below error while doing Scenario JDBC to ABAP Proxy.
    Transmitting the message to endpoint http://XXXXXXXX:50000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    Can any body tell me:
    1. Ideally what should be the port if it is an error due to Port?
    2. I am not able to see the messages in SXMB_MONI?
    3. What is the Flow of my message in the above mentioned Scenario I mean to say from which Engine to which engine?
    Thanks,
    RP

    Hi Rajesh,
    Do I need to mention  Port 8XXX in my Pipeline URL " http://XXXXXXXX:50000/sap/xi/engine?type=entry"?
    I have checked in
    1. SMICM there is HTTP Service port 8XXX
    2. SLD - PI Business System - Pipeline URL is "http://XXXXXXXX:50000/sap/xi/engine?type=entry"
    3. In SXMB_ADM - Corresponding Integ. Server = "http://XXXXXXXX:50000/sap/xi/engine?type=entry"
    Now tell me is these entries are Ideal??
    Also is thr any place where I need to check for Port and URL??
    Thanks for quick response.
    RP

  • Help: Received HTTP response code 404 : Not Found

    Transmitting the message to endpoint http://chmsxd42:52200/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
    Our senario is a simple file transfer one, no object has been created in IR.
    While we run the wizard, we just put the dummy interface name and namespace in the interface and namespace blanks.
    After we activate the objects, the source files were picked up and deleted but there is no file created in the target directory, and we got the error message listed at the top.
    Does anyone has some clue about this? Please help.
    Thanks a lot.
    Aditya Babu

    Hi,
    The port of Integration Engine is 80XX, and so 8001.
    In the SLD you must to select the Business System of XI and there you can just set the corret Pipeline URL.
    It means you AE is unable to communicate with IE.
    t-code SMICM..check the HTTP port No:
    open the SMICM code...just right click anywhere in the window...then click on the Services..it will show u the HTTP and HTTPs port no.
    THen from SLD --Business Landscape --your Business System..chek the Pipeline URL http://<host>:<port>/sap/xi/engine?type=entry
    the HTTP port that u will see in the SMICM should be same in the pipeline URL
    Have you checked this one,...
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Go through this link which as the information of all HTTP errors in XI
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Thanks
    Vikranth

  • Error: CIM_ERR_FAILED: HTTP response code: 404 Not found

    Hi, we had finished to install Sap Netweaver Usage type PI (Abap +Java), now we are running Post Installation task, but we are getting an error when we ran "Configuration Wizard"
    In the step: Configure the integration server for sld
    Error: CIM_ERR_FAILED: HTTP response code: 404 Not found
    Any Idea?
    Thanks
    Elias Mendoza
    The following lines are part of the error log:
    Debug Events
    InvokeService:Configure the integration server for sld
    Library: sap.com/tclmctctemplateslevel1_4_tcc
    SourcePath ./PIPostInstallProcess/configureIntegrationServer8
    Time 2008/07/07 at 20:47:33
    WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
    Execute Java Service
    Library:sap.com/tclmctcutilbasic_ear
    Class:com.sap.ctc.util.SLDConfig
    Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
    InvokeService- Result: Failed
    Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
    Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException

    Dear
    Possibly CIM content is not uploaded to your SLD.
    Is your SLD running properly ?
    Did you install this SLD as a local SLD at the installation of your SAP system (along with other stuff using sapinst) ?
    <removed_by_moderator>
    Kind regards
    Tom
    Edited by: Julius Bussche on Jul 8, 2008 1:55 PM

  • CIM_ERR_FAILED: HTTP response code: 404 Not found

    Hello!
    We are installing NW7.0 PI with local SLD as HA system with virtual name and after patching it up to SPS17 we started Configuration wizard
    PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
    and on step 33/142 Configure the Integration server for sld  we got an error:
    CIM_ERR_FAILED: HTTP response code: 404 Not found
    and from log:
    InvokeService:Configure the integration server for sld
    Library: sap.com/tclmctctemplateslevel1_4_tcc
    SourcePath ./PIPostInstallProcess/configureIntegrationServer8
    Time 2009/05/07 at 10:45:31
    WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
    Execute Java Service
    Library:sap.com/tclmctcutilbasic_ear
    Class:com.sap.ctc.util.SLDConfig
    Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
    Arguments
    SID : XRQ 
    CLIENT : 001 
    HOST : capitate 
    PORT : 8032 
    SLDUSER : PISUPER 
    SLDPASSWORD : % secure content % 
    InvokeService- Result: Failed
    Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
    Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException
    Stacktrace
    com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:414)
    com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:323)
    com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
    This error would be normal with Central SLD but we have local SLD. Is there any parameters for systems with virtual name which is not configured?
    Regards,
    Mart

    Thanks for answering.
    Configuration is done by the Post-Installation Guide - SLD of SAP NetWeaver 7.0   , but there is still same error.
    It seems, that point is in CPA Cache full refresh, because in SLD Java system on app.server still shows his patchlevel 9 not 17 .
    CPA Cache refresh gives an error:
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://capitate:53200/CPACache/refresh?mode=full'. Li...
    CPA cache refresh (mode=full) successfully executed in 703 milliseconds.
    ^
    Regards,
    Mart

  • Java.rmi.RemoteException: HTTP Status-Code 404 Not Found  securesimple/Ping

    Hello!
    I'm testing interop and simple application for JWSDP and I get the following error in the context:
    build-client:
    run-sample:
    [echo] Running the simple.TestClient program....
    [java] Service URL=http://localhost:8080/securesimple/Ping
    [java] Nov 4, 2004 1:31:54 PM com.sun.xml.wss.filter.DumpFilter process
    [java] INFO: ==== Sending Message Start ====
    [java] <?xml version="1.0" encoding="UTF-8"?>
    [java] <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/".............
    [java] </env:Body>
    [java] </env:Envelope>
    [java] ==== Sending Message End ====
    So, after the client has send the message this error occurs:
    [java] java.rmi.RemoteException: HTTP Status-Code 404: Not Found - /secures
    imple/Ping; nested exception is:
    [java] HTTP Status-Code 404: Not Found - /securesimple/Ping
    [java] at simple.PingPort_Stub.ping(PingPort_Stub.java:96)
    [java] at simple.TestClient.main(TestClient.java:37)
    [java] Caused by: HTTP Status-Code 404: Not Found - /securesimple/Ping
    [java] at com.sun.xml.rpc.client.http.HttpClientTransport.checkResponse
    Code(HttpClientTransport.java:302)
    [java] at com.sun.xml.rpc.client.http.HttpClientTransport.connectForRes
    ponse(HttpClientTransport.java:252)
    [java] at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpCl
    ientTransport.java:88)
    [java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
    java:92)
    [java] at simple.PingPort_Stub.ping(PingPort_Stub.java:80)
    [java] ... 1 more
    [java] Exception in thread "main"
    [java] Java Result: 1
    The application is running on localhost in a local network, so for accesing internet we're using a proxy. For this we tried to set up the proxy configuration and still the same error. We've also unplugged the network cable but it didn't help.
    We've done all the neccesary settings and we're using "org.bouncycastle.jce.provider.BouncyCastleProvider " as a JCE provider.
    Thank you!

    Just a guess, but if this is a secure web service shouldn't you be trying to connect to it using SSL? e.g.
    https://localhost:443/securesimple/Ping
    Have you tried hitting the web service via your browser and appending the ?WSDL to the URL
    http://localhost:8080/securesimple/Ping?WSDL
    https://localhost:443/securesimple/Ping?WSDL
    Can you telnet to http://localhost:8080

  • Sender Soap scenario HTTP/1.1 404 Not Found error

    Hello All,
    I created SOAP to  IDOC scenario, generated the WSDL file from Sender agreement and while testing the interface using SOAPUI tool iam getting HTTP/1.1 404 Not Found error.
    i gave login authorization details in the SOAPUI tool.
    Update: when i generated the WSDL file from sender agrement, in the URL the port number was 443.
    when i check the port numer in SMICM transaction it show 50000.
    Now when i test with port numer 443 iam getting Connction refused error.
    Regards,
    Chinna
    Edited by: chinnasapxi on Mar 4, 2011 6:44 AM

    i created the URl and when i tested the from SOAP UI below is the error detials.
    Fri Mar 04 11:32:08 IST 2011:ERROR:com.eviware.soapui.model.iface.Request$SubmitException: com.eviware.soapui.impl.wsdl.submit.RequestTransportRegistry$MissingTransportException: Missing transport for protocol [ http]
       com.eviware.soapui.model.iface.Request$SubmitException: com.eviware.soapui.impl.wsdl.submit.RequestTransportRegistry$MissingTransportException: Missing transport for protocol [ http]
            at com.eviware.soapui.impl.wsdl.WsdlRequest.submit(WsdlRequest.java:241)
            at com.eviware.soapui.impl.wsdl.panels.request.AbstractWsdlRequestDesktopPanel.doSubmit(AbstractWsdlRequestDesktopPanel.java:146)
            at com.eviware.soapui.impl.support.panels.AbstractHttpRequestDesktopPanel.onSubmit(AbstractHttpRequestDesktopPanel.java:777)
            at com.eviware.soapui.impl.support.panels.AbstractHttpRequestDesktopPanel$SubmitAction.actionPerformed(AbstractHttpRequestDesktopPanel.java:488)
            at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
            at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
            at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
            at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
            at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
            at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
            at java.awt.Component.processMouseEvent(Unknown Source)
            at javax.swing.JComponent.processMouseEvent(Unknown Source)
            at java.awt.Component.processEvent(Unknown Source)
            at java.awt.Container.processEvent(Unknown Source)
            at java.awt.Component.dispatchEventImpl(Unknown Source)
            at java.awt.Container.dispatchEventImpl(Unknown Source)
            at java.awt.Component.dispatchEvent(Unknown Source)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
            at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
            at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
            at java.awt.Container.dispatchEventImpl(Unknown Source)
            at java.awt.Window.dispatchEventImpl(Unknown Source)
            at java.awt.Component.dispatchEvent(Unknown Source)
            at java.awt.EventQueue.dispatchEvent(Unknown Source)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
            at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
            at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
            at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
            at java.awt.EventDispatchThread.run(Unknown Source)

  • Getting HTTP response code: 404  Not Found  while playback

    Hi Folks,
    Am creating a loadtest script on Oracle Empirica application by using web protocol with only 6 steps. While play back am getting the following error
    Error Code:INVALID_HTTP_RESPONSE_CODE
    Error Detail:
    oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 404 Not Found
         at oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException.createErrorInvalidHttpResponseCode(ThinBrowserException.java:66)
         at oracle.oats.scripting.modules.http.api.internal.ResponseCodeValidator.validate(ResponseCodeValidator.java:21)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.validate(AbstractHTTPService.java:993)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.navigate(AbstractHTTPService.java:595)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:504)
         at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:494)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1930)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1867)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1975)
         at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1966)
         at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2426)
         at script.run(script.java:153)
         at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:320)
         at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:726)
         at java.lang.Thread.run(Thread.java:619)
    please help me to fix this issue.
    Thanks,
    Jay.

    I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
    Witch port must entered in the URL, 50100 or 8001?
    If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
    Thank you for all answers.
    regards
    Jochen Schütze

  • HTTP response Code 404: Not Found

    Hallo,
    I want to get a Email from the account to my SAP-System.
    The Email is downloaded in the XI-System and then directly the following error is shown.
    "Fehler beim Übertragen zum Endpunkt /sap/xi/engine?type=entry über die Verbindung AFW. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found".
    What could i do?
    Thank you.
    Jochen Schütze

    I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
    Witch port must entered in the URL, 50100 or 8001?
    If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
    Thank you for all answers.
    regards
    Jochen Schütze

  • MBAM 2.5 integration broke my Primary Site Server - Managment Point http status code 404, not found

    I uninstalled MBAM 2.0 and installed MBAM 2.5. During 2.5 installation there was this one section to enter "Web service application pool domain account", where I entered domain admin account. I don´t know if that has any effect on this problem.
    Though, situation now is that my site is now out of order because of Management Point cannot connect to IIS or something like that.
    In status messages I see "MP Control Manager detected management point is not responding to HTTP requests.  The HTTP status code and text is 404, Not Found. Message ID 5436".
    In mpcontrol.log I see Call to HttpSendRequestSync failed for port 80 with status code 404, text: Not Found
    I have tried:
    Bindings checked, that http uses port 80
    MP component is uninstalled and reinstalled succsessfully
    Primary site server has restarted several times
    In IIS, Default Site -> SMS_MP->Basic Settings I did "Test Settings". With pass-through authentification it cannot Access the D:\SMS_CCM path, I changed to the domain admin, and it succseed. I have no idea, does this have something to do
    with it.

    I have experienced all the above problems also and they can be a pain to fix. I guess the moral of the story is (as Andy says) leave the ConfigMgr server alone. If you want an MBAM server then build an MBAM server.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    Hmm, I guess ConfMgr integration will not be the problem if your MP is using http(80) and MBAM will use https(443). If you then set spn to https, it will use 443 as-is, right? But other custom ports might be the problem?

  • Each WebI RESTful web services call brings HTTP/1.1 404 Not Found

    Hello,
    What could be the reason that each call into the WebI RESTful api delivers a HTTP 404 Not Found?
    We have the RESTful url and can connect to the web service.
    We see that when the WACS is not running we get a connection refused.
    We see that when the WACS is running but disabled the connect call hangs until timeout (after 1+hours).
    We think that the HTTP 404 we get with each WebI RESTful call (e.g. URL/raylight/v1/documents/12345678/variables, or links, or properties, or dataproviders ...) has something to do with an installation/configuration issue of the WebI RESTful api.
    It does not seem to be an access right problem.
    We found many patterns how the WebI RESTful api behaves when the access rights are not sufficient. Neither of them had the HTTP 404 in each call.
    How can we prove that the WebI RESTful web services functionality is installed and configured correctly?
    So far we checked the settings in the WACS, and the settings in CMC.Applications.RESTful Web Service. The settings there seem to be ok.
    What else can we check?
    Thanks,
    Bernd

    Hi Bernd,
    You can send a request to:
    [GET] http://<server>:6405/biprws/raylight/v1/about
    (this call doesn't need authentification)
    I don't really understand what is your problem. Is the hanging intermittent?
    Best regards,
    Anthony

  • While processing a message : Error HTTP 404: not found

    Hi gurus,
    I'm stuck on a File-XI-IDoc scenario.
    Here is the message i get in the Message Tool Display:
    Erreur lors de la transmission du message au point d'accès http://rchase12:53000/sap/xi/engine?type=entry via la connexion File_http://sap.com/xi/XI/System. Motif : com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
    It's in French but it it's like my url is not good. I read about the port that must be 80xx in place of 53000 is it true?? I can't find any information about it, in another place than some forum topics.
    Could anyone help me?
    Thanks in advance.
    Thomas

    Hi,
    Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
    Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
    u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
    u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
    u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
    u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
    Regards,
    Shabari

Maybe you are looking for

  • Multiple Secondary Color Correction Possible?

    I'm having a strange problem trying to use the secondary color correction inside the 3 way color corrector. It seems to work ok for the 1st filter, but if I try to use it for a a second or more instance of the filter, it seems to behave strangely or

  • Copy & Paste from PS CS3 to DW CS3?

    Hi Everyone, I have my nice shiny new copy of Creative Suite 3 (Design Premium) and have tried an eagerly anticipated feature with absolutely no luck! I've been trying to copy an image ( small photo) from PS into DW. Sometimes DW grays out the paste

  • PLEASE HELP!... I need to uncompress my pictures

    We switched from Windows to Macs only a few months ago, and while we love all the things my Macbook Pro has to offer we don't really know how to work it good... Anyway, my problem is my husband compressed and exported all my pictures (thousands of th

  • Widescreen with full screen resource in iDVD '08

    I select widescreen to burn the DVD. When I preview DVD(before encoding), I can see my standard size movies play in widescreen mode with 2 gray areas on the left and right, which is what I want. However, after I burn as a DVD, the standard movies are

  • Because my new macbook air is so slow to turn off

    because my new macbook air is so slow to turn off