Connect to cox how
My iPhone connects easily and quickly to my AT&T wi-fi, but I cannot connect my home Cox network wi-fi, even after resetting wi-fi connections.
Hi dralice,
The troubleshooting steps for connecting to Wi-Fi are listed in the article below.
Follow them in order and hopefully this will resolve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you are still experiencing a Wi-Fi issue after trying the above, choose the symptom below that closely matches your issue:
If you're unable to locate a nearby Wi-Fi network
Check to see if the network is available by tapping Settings > Wi-Fi and choose from the available networks listed there. Note: It may take a few seconds for the Wi-Fi network name to appear.
Wi-Fi networks configured as closed or private do not broadcast the network name to Wi-Fi devices.Join a closed or private network by tapping Settings > Wi-Fi > Other and entering the Wi-Fi network name, security, and password.
Try restarting your Wi-Fi router by turning it off and then on again.
Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including passwords, VPN, and APN settings.
I hope this helps ....
- Judy
Similar Messages
-
My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?
Device not recognized in iTunes
-
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg -
I am trying to setup my ipad 2 but I can't get back to the wi-fi connections section. How do I get there, nothing is working.
The Wi-Fi connections section is in Settings > Wi-Fi
If the home screen is not visible tap the Home button, the button on the front of your iPad that has the rounded square in it. Once you reach the Home screen swipe through the screen of apps until you find the Settings app. Tap Settings and go to Wi-Fi.
If your iPad is completely non responsive, try a restart.
Press and hold the Home button and the Sleep button simultaneously ignoring the red slider. Keep holding until the Aple logo appears and your iPad will restart.
The sleep button is on the side of your iPad on the side opposite from the Home button. -
My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?
Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?
You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
My iphone 5 can't tethering to my mac by cable, because it's not recognized as connected, someone knows how to fix it?
Is the device reasonably well changed and active on the same Wi-Fi network?
If you need to connect the USB cable wrap the end of the USB connector in some thin tape to stop it getting caught or use a USB extension cable.
tt2 -
After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?
After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?
knifepainter wrote:
What I know is that the phone worked perfectly fine until I upgraded the software. I've tried resetting the network settings to no avail. I've shut the phone off, put it in a ziplock baggie and then into the freezer for 15 minutes. This made the wifi work temporarily but then it goes back to being grayed out. The wifi does not work at other wifi sites away from my home as well. Seems like an apple issue to me and would appreciate someone coming up with a fix, apparently I'm not the only one having this problem. Thanks for replying to my query, any ideas?
It's likely a hardware issue. The iOS will not directly cause this issue.
Use this article first:
iOS: Wi-Fi settings grayed out or dim - http://support.apple.com/en-us/TS1559
If that fails to resolve it, then try setting it up as new and testing again.
How to erase your iOS device and then set it up as a new device or restore it from backups - http://support.apple.com/en-us/HT4137
If the issue remains even after set up as new, it's a hardware problem, not a software problem. You'll need to contact Apple for you hardware service options. If within warranty it should be free. If not, expect to pay $149 USD + tax if it's an iPhone 4, $199 USD + tax if it's an iPhone 4S. -
I just got a new iMac and want to use it for iTunes. when i connect my iPhone how do i transfer everything in my iPhone to this new computer?
If you do not have access to your old PC/Laptop and therefore cannot transfer your iTunes library, this document is very useful https://discussions.apple.com/docs/DOC-3141
-
I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.
Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.
-
my ipod touch got stolen and when i got it back it said ipod disabled connect to iTunes how do i get my information from notes, contacts, etc. and apps on it back while restarting it through iTunes?
Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see the following. This will get the iPod like it was when the backup was made. This is you only possible way of getting your information back since when the iPod is in recovery mode (the screen show conect to iTunes) the iPod is already erased.
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When connecting to Synch how do I fix "The iphone cannot be used because thr Apple Mobile device service is not started"
Refer to this article to restart AMDS:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567 -
my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?
Place the device in DFU mode and restore.
-
My ipod is disabled connect to itunes, how to fix it?
my ipod is disabled connect to itunes, how to fix it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I am new to Apple products and I am trying to transfer my contacts to my iphone from a Casio G'zOne phone but I keep getting Connection Unsuccessful. How do I transfer the contacts?
How are you trying to transfer them? Via Bluetooth? If so, that will not work.
You need to get the contacts from the Casio phone into a supported contact manager on your computer (Address Book/Contacts on a Mac or Outlook on a PC) then sync them to the iPhone via iTunes or iCloud.
Maybe you are looking for
-
I keep trying to put music on my suffle but i does not seem to work everytime i try to put music on it i get a error message that says cannot be updated cannot be read from or written to. I am lost I got this for my sister and it can not get it to wo
-
Database Level Security not working ???
The 10 g (10.1.2.1) documentation states the following: Chapter 7 Controlling access to information: "Regardless of the access permissions and task privileges that you set in Discoverer Administrator, a Discoverer end user only sees folders if that u
-
Printing JPanel that is added to the JScrollPane
Hi I am facing a typical problem while I am printing my JPanel. My Panel is added to the JScrollPane.And I added 200 Images to the JPanel (20 rows and 10 columns). To see the 6,7,8,9,10 Images I have to scroll it left side and for 80 to 200 images I
-
Hello, I'm trying to embed a .swf file into a .pdf file that i'm creating in acrobat. I keep getting an error box that reads: "Cannot create the movie annotation because the movie could not be loaded. This can occur if the file cannot be found or the
-
I have CallManager 4.2 and I want to make call reject functionality when the phone is on-hook and ringing. There is only answear and iDivert softkeys in this mode. It is possible to make iDivert to invalid number but I'm looking for more elegant solu