Connect to Exchange 2007 Mailboxes with Exchange 2013 Management shell

Hello,
I was wondering if it is possible to use the Exchange 2013 Management Shell with the older version of Exchange 2007. When I run the console now it give me an error saying no exchange servers are available in the Active Directory site. When I use Exchange
management shell for 2007 the errors do not appear. Wondering if the management shell is backwards compatible.
Thanks,

No. your management shell MUST be the same roll-up version of exchange. I have applied updates and learned the hard way to block all updates that go beyond the server version you are
running.
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollup-bui...
To this end, you can use the same installation media that was used to install your Exchange server "Provided you are hosting your own", just install the management console instead of the whole thing,

Similar Messages

  • Exchange 2013 management shell error

    The problem am facing is that when I opened the Exchange management shell on my  Exchange 2013  server locally it would fail to connect.The following error is receiving with Administrator account.I add another account in Organization
    Management Permission  it connect successfully.
    following is error
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.: mail.abc.com
    VERBOSE: Connecting to mail.*.*.
    New-PSSession : [mail.abc.com] Connecting to remote server mail.abc.com failed with the following error message :
    WinRM cannot process the request. The following error occurred while using Kerberos authentication: Cannot find the
    computer mail.abc.com. Verify that the computer exists on the network and that the name provided is spelled
    correctly. For more information, see the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : NetworkPathNotFound,PSSessionOpenFailed
    [PS] C:\Windows\system32>

    Hi wert
    Thank you for your question.
    We could run Set U to make sure the logon user is domain administrator, because we use another account logon without any problems. We could check if some permissions are missing for administrator.
    We could refer to the following steps to delete administrator profile to check if the issue persist:
    Open up "Control Panel | System and Security | System"
    In the dialog click on "Advanced system settings" (requires Admin rights)
    The "System Properties" dialog will be displayed
    Make sure you are in the "Advanced" register
    In the "User Profiles" section click on "Settings"
    The "User Profiles" dialog is displayed
    Select administrator account and Delete it.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Exchange 2013 Management Shell - By Subject

    Does anyone know a EMS command to search by subject as I cant do it from the Exchange Admin Center

    Hi,
    Please try the following command:
    Get-ExchangeServer | Get-MessageTrackingLog -MessageSubject "test" -Start "12/12/2013 8:00AM" -End "12/19/2013 10:00AM"
    In addition, the following articles for your reference:
    Search Message Tracking Logs
    Get-MessageTrackingLog
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Outlook 2007 SP3 can't connect to Exchange 2013

    Outlok 2007 with latest hotfixes
    Freshly migrated mailboxes
    Gives the error 
    Can't open outlook-The set of folders cannot be opened
    Cert has internal FQDN name. Encryption is disabled
    Any pointers?

    Does the certificate have the server name?
    That was apparently the solution here:
    http://social.technet.microsoft.com/Forums/exchange/en-US/1ae67f48-d1ba-44b5-a3c7-4e9a5e955f3e/outlook-2007-cannot-connect-to-exchange-2013?forum=exchangesvrclients
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Unable to connect to Exchange 2013 using Outlook 2010/2013 with latest patch

    Dear All,
    I'm setting up Exchange 2013 CU2 coexist with Exchange 2010 SP3. Since we are still planning and testing, the internet is still pointing to 2010 for send/receive mails.
    The 2013 environment are:-
    2 X CAS server with MS NLB configured
    2X MBX server with DA
    Internal NLB/licent access: excas2013.int.my.domain
    External access (current set on 2010 as well): webmail.my.domain
    Certificate with valid subject name has been import to 2013 and 2010:
    CN: webmail.mydomain
    SAN: excas2013.int.my.domain
    SAN: excas.int.my.domain (for 2010)
    I am able to connect to my Exchange 2010 user thru 2013 CAS server and proxy to exhcnage 2010 by outlook. However, I cannot connect to Exchange 2013 user by outlook. During mail profile create of Exchange 2013 user by autodiscover (pointed to exchange 2013),
    the process looks good:-
    Establish network connection (checked)
    Searching for [email protected] server settings (checked)
    Log on to server
    The process stop at "Log on to server" and a windows prompt, saying:
    The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
    Clicked OK, I can see:-
    MS Exchange Server:
    [email protected]
    Mailbox:
    =SMPT:[email protected]
    WHen I click "Check Name", it said The name cannot be resolved.
    I have no idea of what is going on. Just want some help~

    I have checked the iis log:-
    2013-09-23 06:58:29 10.144.144.71 POST /autodiscover/autodiscover.xml &cafeReqId=99ed5467-a294-481c-95eb-9b21d6530404; 443 mydomain\training101 10.144.85.4 Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.7106;+Pro) 200 0 0 8018
    2013-09-23 06:58:29 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f4652a19-2e8e-4652-a007-0cf0b7fb792e&cafeReqId=f4652a19-2e8e-4652-a007-0cf0b7fb792e; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    0
    2013-09-23 06:58:29 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=c48cda77-6008-423b-8e8b-d6d40f4d1b39&cafeReqId=c48cda77-6008-423b-8e8b-d6d40f4d1b39; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    0
    2013-09-23 06:58:29 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=033f1ce4-43ba-49b1-b226-f4cc357e7702&cafeReqId=033f1ce4-43ba-49b1-b226-f4cc357e7702; 443 - 10.144.85.4 MSRPC 401 1 2148074252
    15
    2013-09-23 06:58:29 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=d2424d25-ca9e-4867-922f-e527b041d9db&cafeReqId=d2424d25-ca9e-4867-922f-e527b041d9db; 443 - 10.144.85.4 MSRPC 401 1 64 0
    2013-09-23 06:58:31 10.144.144.73 POST /autodiscover/autodiscover.xml &cafeReqId=ff35f49b-e418-4d55-b66c-dbae509cc12f; 443 - 10.144.92.17 Microsoft+Office/12.0+(Windows+NT+5.1;+Microsoft+Office+Outlook+12.0.6662;+Pro) 401 1 2148074254 0
    2013-09-23 06:58:31 10.144.144.73 POST /autodiscover/autodiscover.xml &cafeReqId=033f8ed6-d7ce-41b2-8ed2-e275e22e53be; 443 mydomain\tkchung 10.144.92.17 Microsoft+Office/12.0+(Windows+NT+5.1;+Microsoft+Office+Outlook+12.0.6662;+Pro) 200 0 64 15
    2013-09-23 06:58:37 10.144.144.71 POST /powershell serializationLevel=Full;ExchClientVer=15.0.712.24;clientApplication=ManagementShell;TargetServer=;PSVersion=3.0&sessionID=Version_15.0_(Build_711.24)=rJqNiZqNgbqnsr3Py9GWkYvRlZqc0ZyQkoHOxsvOxsbJzczNgcbQzczQzc/OzN/Ixc/KxczI376y&cafeReqId=5350aa81-6668-489e-b099-3b3647115f10;
    80 mydomain\Administrator 10.144.144.71 Microsoft+WinRM+Client 500 0 0 180040
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f961c596-efff-4696-9188-611a0d151601&cafeReqId=f961c596-efff-4696-9188-611a0d151601; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    0
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=753d8852-ce19-459c-ac78-849c3e51e0a1&cafeReqId=753d8852-ce19-459c-ac78-849c3e51e0a1; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    15
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=c9e86049-c883-4b03-8546-143909361a80&cafeReqId=c9e86049-c883-4b03-8546-143909361a80; 443 mydomain\training101 10.144.85.4
    MSRPC 404 0 64 78
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=327ace4c-b2c8-44c1-95ba-7871727f60ef&cafeReqId=327ace4c-b2c8-44c1-95ba-7871727f60ef; 443 mydomain\training101 10.144.85.4
    MSRPC 200 0 64 109
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=a7c8daa9-e458-4f2d-b388-7300e8679dcd&cafeReqId=a7c8daa9-e458-4f2d-b388-7300e8679dcd; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    15
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=c40afede-dd8f-4ac7-a3dd-827872bb2e76&cafeReqId=c40afede-dd8f-4ac7-a3dd-827872bb2e76; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    15
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=2dc56148-1900-4044-b72a-4b13e5e871f0&cafeReqId=2dc56148-1900-4044-b72a-4b13e5e871f0; 443 mydomain\training101 10.144.85.4
    MSRPC 404 0 64 15
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=9475aad3-9537-4dac-86cb-6fdb187fa148&cafeReqId=9475aad3-9537-4dac-86cb-6fdb187fa148; 443 mydomain\training101 10.144.85.4
    MSRPC 200 0 64 31
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=11a54e96-d8d8-4649-8e01-f8138ebf7b8d&cafeReqId=11a54e96-d8d8-4649-8e01-f8138ebf7b8d; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    0
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=b1a3e503-1077-4144-84df-fcdb65a7eea4&cafeReqId=b1a3e503-1077-4144-84df-fcdb65a7eea4; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    15
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=5b5639ba-4c91-4351-bda6-bcec46d6b218&cafeReqId=5b5639ba-4c91-4351-bda6-bcec46d6b218; 443 mydomain\training101 10.144.85.4
    MSRPC 404 0 0 15
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f200806f-3294-4210-8940-e3fee0385ccd&cafeReqId=f200806f-3294-4210-8940-e3fee0385ccd; 443 mydomain\training101 10.144.85.4
    MSRPC 200 0 64 46
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=675d6515-85da-43fa-9cd8-0a18ac06a71f&cafeReqId=675d6515-85da-43fa-9cd8-0a18ac06a71f; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    0
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=b97b2c3e-5309-4927-8330-fe0f339b5930&cafeReqId=b97b2c3e-5309-4927-8330-fe0f339b5930; 443 - 10.144.85.4 MSRPC 401 1 2148074254
    0
    2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=504d462a-db21-4e4b-8568-79e4099d78c1&cafeReqId=504d462a-db21-4e4b-8568-79e4099d78c1; 443 mydomain\training101 10.144.85.4
    MSRPC 404 0 0 31
    2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=b4757b1e-8428-454a-91df-ca0a2153144f&cafeReqId=b4757b1e-8428-454a-91df-ca0a2153144f; 443 mydomain\training101 10.144.85.4
    MSRPC 200 0 64 46

  • Unbale to install November update on Outlook 2007 SP3 for connecting to Exchange 2013

    Hi
    I was trying to upgrade my outlook 2007 clients for connecting to Exchange 2013 environment. First I have installed Office SP3 (kb2526086). Outlook version after that is 12.0.6607.1000. Later I  tried to install nNovember 2012 update which is a
    prerequisite for connecting to Exchange 2013 clients (support.microsoft.com/kb/2687404/en-us) but it shows me a message "Expected version of the product was not found on the system". No idea  how to proceed now, expecting help.

    I recommend that you post this in the Outlook Forum:  http://social.technet.microsoft.com/Forums/en-US/outlook/threads
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Connecting to Exchange 2013 Server and Server name is weird

    Hello
    When I connect to my Exchange 2013 Lab Server with a Outlook 2010 Client something shows wrong.
    The Name of the Exchange server that I type in changes from EX01 to !"¤"&#/25278596"&¤%/¤%/.
    What can be the problem?

    Hello
    When I connect to my Exchange 2013 Lab Server with a Outlook 2010 Client something shows wrong.
    The Name of the Exchange server that I type in changes from EX01 to !"¤"&#/25278596"&¤%/¤%/.
    What can be the problem?
    Are you sure that you don't see something like this: [email protected]
    That is what you should see when connecting to Exchange 2013.
    Outlook clients no longer connect to a server FQDN as they have done in all previous versions of Exchange. Outlook uses Autodiscover to create a new connection point comprised of
    mailbox GUID, @ symbol, and the domain portion of the user’s primary SMTP address.
    See:
    Whats new in Exchange 2013 - Architecture section.
    Martina Miskovic

  • Outlook 2010 connected to Exchange 2013 prior to coexistence

    I installed Exchange 2013 into the environment (Exchange 2010 SP3) and left it at that (ie no additional config).  I noticed Outlook 2010 client connected to Exchange 2013 somehow (it got a cert warning).  Why would Outlook connect to the new
    Exchange 2013 server like that?  Although I enabled Outlook Anywhere, it is not trying RPC/HTTP first, but rather RPC/TCP.

    Hi,
    By design, if the user mailbox located in Exchange 2010 server, the Outlook client will connect to Exchange 2010 server automatically.
    According to your description, I found that we have nothing additional configuration on Exchange 2013. So, only server name and internal services' URLs are configured automatically during the Exchange 2013 server installation.
    If it has no mailbox located in Exchange 2013, it is odd that Outlook client connect Exchange 2013 first.
    I suggest running "Test E-mail AutoConfiguration" in Outlook to verify which Exchange server the Outlook connected.
    Thanks
    Mavis 
    Mavis Huang
    TechNet Community Support

  • OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.

    hi ALL
    OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
    Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
    2 cas Servers
    first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
    Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
    please support
    thanks

    Hi,
    According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
    If I have misunderstand your concern, please do not hesitate to let me know.
    I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
    Please run following command to double check the database status:
    Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
    If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
    for further troubleshooting.
    Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
    Best Regards,
    Allen Wang

  • Exchange 2013 Management Tools Install Error on Win8

    Hello,
    I'm having some trouble installing the management tools for Exchange 2013 on Windows 8. While going through the install if I leave "Automatically install Windows Server roles and features that are required to install Exchange Server" check I get
    this error...
    Error:
    The target of the specified cmdlet cannot be a Windows client-based operating system.
    If I uncheck that option and just check the Management Tools option, the error message changes to...
    Error:
    Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
    Error:
    Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
    Error:
    The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
    Error:
    Either Active Directory doesn't exist, or it can't be contacted.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
    Warning:
    Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
    Any help on resolving this so I can move on with the installation would be appreciated.
    Thanks.

    Hi,
    To install the Exchange 2013 Management Tools, there are many prerequisites we need to understand before installation. And even
    we must manually install some required software.
    Here are some references that may be helpful to you:
    Install the Exchange 2013 Management Tools
    http://technet.microsoft.com/en-us/library/bb232090(v=exchg.150).aspx
    Exchange 2013 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Exchange 2013 management tools installation on windows 2012 standard edition gives error.

    Exchange 2013 management tools installation on windows 2012 standard edition gives following error.
    Does anyone observed this issue ?
    Error:
    The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
    My Test lab is having
    Exchange 2013 installed (xyz.local) domain and working fine.
    Now i am installing Exchange Management tools on server which is member of (xyz.local) Domain  (base OS : Windows 2012 standard edition : Windows updated)
    Best Regards
    sameer Prabhune

    Hi Sprabhune,
    It should work.
    Did you install the tool by GUI or cmd?
    Please select "Automatically install Windows Server roles and features that are required to install Exchange Server" to have the Setup wizard install required Windows prerequisites.
    If possible, please try to install the tool on Windows 7/8 client to test.
    Exchange 2013 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354.aspx
    Frank Wang
    TechNet Community Support

  • Forcefully delete user's "Deleted Items" from Exchange 2010 Management shell ?

    After migration from Exchange 2003 to 2010 my organization's some user can't delete items from their deleted items folder, it generate a error message so how can I forcefully delete user's deleted items from their "Deleted Items folder" from
    Exchange 2010 Management shell ? Thanks
    Babu

    Hi Babu ,
    Based on my knowledge i have given some suggestions please have a look in to it.
    1.We cannot use the search-mailbox command specifically for any folder in the mailbox.But we can use it for a whole mailbox.Below is the command which will copy the entire contents of the mailbox to the target folder called as "backup" .
    Search-Mailbox -Identity "problematic mailbox name" -TargetMailbox "test mailbox" -TargetFolder "backup" -LogLevel Full -deletecontent
    Note : Before executing the above command , please execute the below.
    New-ManagementRoleAssignment -Name "Import Export_Enterprise Support" -SecurityGroup "Enterprise Support" -Role "Mailbox Import Export"
    Once the above command is executed then you need to add your admin account to the security group "Enterprise Support" and then use the Search-Mailbox command to copy the entire items to the target mailbox and also it will delete all the copied
    items from the original mailbox.
    2.Another one option is to use the MFCMAPI tool to force delete the items on the deleted items folder.
    Most importantly before doing all the above , please share me the error message what your users are facing while deleting the items from deleted items folder.
    Thanks & Regards S.Nithyanandham

  • Connection beetween Exchange 2013 with outlook client 2007 SP3

    Hi All,
    My company reinstall exchange 2013 when the previous mailbox DB error. When I implemeted a new server. I configured step by step carefully. if we use outlook 2010 connect to exchange server, send/receive work normally. But someone, uses outlook 2007 SP3,
    they have somer error. They work with "cached mode", the connection from outlook to exchange server connected normally, but mail items sometime disappear in outlook client, when i check in the OWA, the mailbox item appear on this. 
    I tested with "online mode", the mailbox items push into outlook.I switched to "cached mode", this items haven't in outlook. Everybody who's meet the problem, please help me the solution can resolve the problem? Many thanks.
    Quoc Dao

    Hi,
    Would you please let me know edition information of the Windows Server? Is it a Windows Server 2012, Windows
    Server 2012 R2 or other?
    On current situation, please refer to following KB and check if can help you.
    Sometimes e-mail messages do not appear in your
    Cached mode Inbox even though they were synchronized down from your mailbox
    By the way. Based on your description, this issue seems to be more related to Outlook 2007. If this issue still
    exists, I suggest that you should post in
    Outlook forum. I believe we will get a better assistance there.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Outlook 2007 - single profile connecting to Exchange 2013 / 2007 mailboxes

    Hi,
    I am in the early part of a migration from Exchange 2007 to Exchange 2013. So far I have 2013 installed and running in a DAG and just moved my own mailbox to the new server.
    I set up a new profile in Outlook 2007 which connects to my mailbox on Exchange 2013. The problem is that I need to add additional mailboxes to my profile which are still hosted on Exchange 2007, however this is not working.
    I thought at one stage I tested this and was able to get it work with a test mailbox also hosted on Exchange 2013.. but maybe I never did.
    Does anyone know if this is possible at all (single Outlook profile, primary mailbox hosted on Exchange 2013 and other mailboxes on Exchange 2007). Most of our users have an additional mailbox mapped in their profile so I hope there is some way around this.
    Thank you!

    Hi,
    It is possible to open a shared mailboxes on a legacy server.
    Your problem could be caused by:
    Not having one of the later CU installed (read CU4 or CU5)
    Incorrect authentication methods configured (see link below)
    Outlook is not at the latest patch level
    Users of Exchange Server 2013 can't open public folders or shared mailboxes on an Exchange 2010 or Exchange 2007 server
    http://support.microsoft.com/kb/2834139
    Martina Miskovic

  • Outlook 2010 connecting to Exchange 2013 and 2007 ... delivery fails

    Hello,
    we are having a problem with a few Outlook 2010 Clients that have two Exchange accounts setup in one profile. One account is connecting to the company's Exchange 2013 Server, the second account is connecting to an external provider's Exchange 2007 infrastructure
    using Outlook Anywhere.
    The companies Exchange 2013 was recently migrated from Exchange 2010 and this is the point where the problem started.
    Some users are no longer able to send using the external Exchange 2007 account. When they try they are receiving an NDR with the following error message:
    #554 5.6.0 STOREDRV.Deliver; Corrupt message content##  from the external provider's servers.
    When I setup a profile containing only the external provider's mailbox everything works fine until I am adding the company's Exchange 2013 back in at which point the same error appears.
    We have no problems using the company's Exchange 2013 servers.
    Does anyone have an idea what causes this and how to resolve it? The external provider is uncooperative in troubleshooting so we are left with the problem.
    Thank you
    Sascha

    Hi,
    The problem should be related to the External Exchange 2007.
    Please refer to this kb below:
    http://support.microsoft.com/kb/2203381/en-us
    This problem occurs when the email message is a multipart/mixed MIME message which contains a text/plain body and an application/applefile body.  If the corresponding body is not a real application/applefile body, the Exchange Server 2007 server considers
    that the email message is invalid. Therefore, it generates the NDR. However, Exchange Server 2010 can deliver this kind of email message successfully.
    To resolve this problem, you should let the External Provider install the following update rollup:
    2279665 Description of Update Rollup 1 for Exchange Server 2007 Service Pack 3
    Hope this helps.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

Maybe you are looking for

  • Lightroom 3 and Photoshop CS6 problem when editing

    Hi, I have just upgraded to Photoshop CS6 and now when I 'edit in Photoshop CS6' from lightroom and save it, the image doesn't appear next to the original RAW file as it did before. Now lightroom creates its own folder with the edited files in. For e

  • Finder not opening automatically

    Have just taken delivery of a brand new iMac and was excited at seeing Mountain Lion in action.  However, after just a few short days, am noticing that Finder isn't opening/launching automatically on startup, although the 'light' is on in the Dock. 

  • Types and graphics displayed incorrect in Safari with a second User account

    With my own user account (Admin) Safari works very well. With the second user account I have problems to display Websites correctly. They are only displayed in capital letters and graphics are not loaded. At first I was thinking it depends on the adm

  • Can I convert my VHS tapes into DVD using iMAC?

    How can I convert my VHS tapes into DVD by using iMAC?

  • Basic questions about Mapviewer for OBIEE 11G

    Hello All.. I am pretty rookie in OBIEE and I have never worked with Mapviewer before.. I am going some POC right now in my environment and I want to experiment map reports in OBIEE.. My current OBIEE version is 11.1.1.6.5, Oracle DB version is 11.2.