Connect to files on exchange server

How can i connect to files on Exchange Server 2010. I have established a VPN connection but i cannot see any of the files on the server?

See under "Access Network Drives from a Mac" on this page:
Use your Macbook on the Corporate Windows-only Network

Similar Messages

  • TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

    My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
    I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
    Help please!

    I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
    In the meantime I have also tried:
    Deleting and re-creating the account AGAIN!
    And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
    But please remember that:
    The phone would not connect for 2 months after I bought it
    Then started working unexpectedly in December
    Then stopped working again when IOS 6.1.2. was installed
    Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
    Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

  • DCOM was unable to communicate with the computer xyz using any of the configured protocols; requested by PID 7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).

    Hi,
    Previously I've two exchange server 2013 named : ABC and XYZ. After is decomm XYZ, i got this error :
    DCOM was unable to communicate with the computer XYZ using any of the configured protocols; requested by PID     7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).
    EventID:10028
    Source:DistributedCOM
    May I know the reason why the server keep looking for the non-exist server and how to terminate this process?
    Thanks in advance.

    Hello,
    It seems that error message occurs on the same machine with the previous Exchange Server you have decommissioned. Have you reinstall the Windows System after uninstall the Exchange
    Server?
    You need to check the registry keys but this is not efficient solution. The most efficient way is to reinstall the Windows if it is convenient.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Unable to connect to the MS Exchange server after upgrading to ios 7.1.2

    I received a new iPad 4 through work.  Upgraded to ios 7.1.2, but now I'm not able to connect to the Exchange server.  Contacted IT through work, they have no idea how to correct it.  They say all of my settings are fine.  The error message says "Cannot Get Mail   The connection to the server failed."  Any thoughts?

    Appears to be a wifi connection problem. Did it work prior to the iOS update?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Since it's a company wifi, you won't be able to do many of these.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problem connecting outlook 2013 to exchange server

    Hello,
    I recently bought a new windows laptop for emailing (our company is otherwise only using Mac).
    Setting up Outlook with the intended email address failed, and at this point, when clicking Outlook, I get the following message:
    "The connection to Microsoft Exchange is unavailable. Outlook must be be online or connected to complete this action."
    The only option is to click "ok".
    The following window is then opened:
    "Microsoft Exchange"
    It has only one tab, containing:
    "Microsoft Exchange server" window, in which I've entered the server address.
    "Mailbox" window, in which I've entered the email address. There is a button called "Check Name".
    If clicked, the following message shows up:
    "The name can not be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
    By clicking "ok" anyway, the following message appears:
    "Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The file C:\xxxxxxxxxxx.ost is not an Outlook datafile (.ost)."
    The problem seems to be that there is nothing I can do to change these messages. I have access to the correct server name, address etc.
    What to do?
    Thank you for your help!

    Hi Scout,
    Thank you for your question.
    As Ronomatic said, we could clear the present profile and re-build profile by the following link:
    http://support2.microsoft.com/kb/829918/en-us
    The problem seems to be that there is nothing I can do to change these messages. I have access to the correct server name, address etc.
    Notice: We will make sue the client could resolve the FQDN of Exchange server by
    Ping or Nslookup；
    Waiting your reply. 
    Best Regard,
    Jim

  • Can't connect to my work exchange server 2003

    I am one of the only people in my office with a Mac and my IT dept. refuses to assist me. Therefore, I am forced to try to resolve issues myself (which is not working out).
    I have successfully sent mail through the company's outgoing mail server, but I cannot connect to the incoming mail server to receive my messages.
    On a side note: I have entourage 2004 running successfully with no problems other than the program is crippled compared to outlook on windows. I want to run Apple's Mail program but can't get working, and I'm sick of running Outlook through Parallels.
    To configure Outlook and Entourage all I need to put in is the exchange server path (and login info) and it configures the rest. So how do I know what the outgoing and incoming paths are for Apple Mail? Are they the same? I right now I have both the incoming and the outgoing set up with the same exchange server paths hwmxmsg05.hotels.ad.**.com.
    Any Ideas? Another post mentioned make sure certain things are configured on the server side? What would they be as I need to relay them to someone who knows.
    Thanks!!!
    24" iMac Mac OS X (10.4.9)

    I feel your pain. I also am a lone Mac user in an entire building full of PC robots, and the IT people haven't got a clue.
    I've been trying to get Mac mail working with the Exchange server here, but it's just not happening. I've managed to get Entourage working though, which is far from ideal but significantly better than the web-based version of Outlook that I'd been having to use up till now.
    For entourage, then yes - the incoming and outgoing servers are the same. You may need to ask your recalcitrant IT people which port numbers to use, but give it a whirl anyway.
    Best of luck,
    Boris
    UK

  • Connecting Apple Mail to Exchange Server

    I just bought a new IMac and have been trying to pop to my university email account. It is on an exchange server. I have successfully popped to this account using Outlook, my IPhone and other email programs, but when I try to set up Mail (version 2.1.1), it cannot connect at the point where it says "Checking connection to POP server"....it always bombs out with a mesage that says "The POP server xxxx is not responding"
    Given that I'm able to connect with other Mac products (IPhone) as well as non Mac products, this seems like some probelem specific to the OS system. Any suggestions on how to connect would be greatly appreciated.
    Thanks
    Allen

    I'm have an exchange account at a university which works ok. When setting up the account with the mail wizard, I choose exchange from the menu instead of POP. I've also read where users have chosen IMAP.
    I'm not familiar with the iphone setup so I can't comment about why iphone POP would work with exchange server.
    I know I had to use the university web site and follow their setup info for exchange server. They didn't have an apple version so I just applied what they suggested the best I could.

  • Connect to vpn through exchange server

    looking for some tips for connecting a mac pro with OS X 10.6.8 to a vpn and via an exchange server, accessing email.  Help please.

    Anthony,
    Thanks. A few answers for you...
    What VPN Client are you using. Are you conneting
    through a dial in or through a network protocol (like
    an ssh tunnel)?
    I'm using Apple's "Internet Connect" to connect by PPTP. I connect from home via DSL.
    Are you using the public or private ip address of the
    server for this ping?
    If I understand right, private. I ping an address that a 192.168.0.x style address. Originally I couldn't ping the server until I changed the local address assigned by my DSL router (also 192.168.0.x). They were too similar.
    "(When I try "Connect to Server..." and enter
    smb://serveripaddress, a dialog box comes back with
    the correct workgroup and my username, but when I
    enter my password I get: "Could not connect to the
    server because the name or password is not
    correct.")"
    What happens if you use the dns name of your server
    for example:
    smb://servername.domain.office/ShareName?
    I get an error (-36). The finder can not read some of the data in "smb://servername.domain.office/ShareName"
    Oh,and you are putting the share name youre trying to
    connect to right?
    Yes. I should have said "When I try "Connect to Server..." and enter smb://serveripaddress/Shared..."
    One more thing...
    -I tried mapping the drive through VPN on a PC connected to the same DSL modem/router as the Mac and succeeded. At least I know, I think, that it is possible...
    Thanks for the help! I'm out of answers or even guesses.

  • Do connections between Outlook and Exchange Server continue to sync without proper DNS?

    Hi there,
    We were acquired by an other company that uses Office365.com, so we are moving accounts over from Intermedia, our existing provider, to your service. My question is this: If i point our MX records over to Office365, will we be able to work with the old calendar
    and email items using the existing connection between Outlook and Intermedia Exchange? I understand that no new external mail will be delivered to the Intermedia accounts, but will we still have access to the existing items in the old mailbox as long as we
    have the Intermedia accounts?
    My plan is to receive new mail at Office365.com while taking our time to copy over old emails from the Intermedia folder to Office 365 folders.
    Thanks,
    Jeff

    Hi,
    According to your description, your accounts are moved from on-premise Exchange server to Exchange online server and you have the doubt about the availability of calendar and emails through the on-premise Exchange server.
    However, since it’s related to Exchange online, to get more professional and quicker help, I recommend you post it on our Exchange online forum, as Ed said.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Why is installation file for Exchange Server CU7 much smaller than SP1.iso?

    I was wondering why is the ISO-Image for Exchange Server 2013 with SP1 4.5 GB in size and the CU7.EXE only 1.6 GB? I thought CU7 contains everything SP1 contains. Is it because one is a disk image and an other an executable?

    The EXE is compressed.  When you extract it, it should be close to the same size (probably bigger) than the SP1 iso.  
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • A user on our network has lost the ability to sync with microsoft Exchange. She updated to OS 4.3.5 on Monday, and this morning her sync stopped working, and I am no longer able to connect her to our Exchange server. Any available solutions?

    I am running Windows Server 2003, and Exchange 2003. The user has had no previous problems with connections, until her OS update.

    Same exact thing with me.  And no help from apple.  Just dropped nearly $600 and cannot get a decent working setup.
    Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
    The crash happens only on iTunes store access.

  • N9 doesn't connect to my work Exchange Server

    I am entering all the info correctly, but when I touch "Done" it says that I could not connect to the server or something
    We are using a self sighed security certificate.
    When I go to security, certificates, the certificate is listed there.
    If I delete it, choose add new cert, mailsrv.cer is listed, I touch "Install", there are some settings, like wi-fi, software writers, bla-bla, but no "Done" or "Save" button
    How does certificate installation works on N9?

    @a_petrov303
    Similar post without resolution here:/t5/Maemo-and-MeeGo-Devices/Install-certificate-on-the-N9/m-p/1185501/highlight/true#M27746
    Happy to have helped forum with a Support Ratio = 42.5

  • External Clients cannot connect to Exchange Server

    Hello all:
    My external clients using outlook cannot connect to Exchange Server 2013.  We have on-presmise version updated to Cu3 and after the Cu3 update we lost connectivity with Outlook clients.  Many of the settings in IIS were changed after the Cu3 update,
    I noticed after my http->https redirect was not applied anymore to the default website.  Here is my Get-OutlookAnywhere results:
    RunspaceId                         : 6379fab1-f692-484f-8118-99e48330d4c4
    ServerName                         : EXCHSERV
    SSLOffloading                      : True
    ExternalHostname                   : mail.domain.com
    InternalHostname                   : mail.domain.com
    ExternalClientAuthenticationMethod : Negotiate
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic}
    XropUrl                            :
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    MetabasePath                       : IIS://EXCHSERV.domain.com/W3SVC/1/ROOT/Rpc
    Path                               : D:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
    ExtendedProtectionTokenChecking    : None
    ExtendedProtectionFlags            : {}
    ExtendedProtectionSPNList          : {}
    AdminDisplayVersion                : Version 15.0 (Build 775.38)
    Server                             : EXCHSERV
    AdminDisplayName                   :
    ExchangeVersion                    : 0.20 (15.0.0.0)
    Name                               : Rpc (Default Web Site)
    DistinguishedName                  : CN=Rpc (Default Web
                                         Site),CN=HTTP,CN=Protocols,CN=EXCHSERV,CN=Servers,CN=Exchange Administrative
                                         Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=domain,CN=Microsoft
                                         Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
    Identity                           : EXCHSERV\Rpc (Default Web Site)
    Guid                               : 596ed7a1-ceec-4a36-9cbc-617ac5214463
    ObjectCategory                     : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
    ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
    WhenChanged                        : 12/23/2013 2:20:41 AM
    WhenCreated                        : 11/25/2013 2:51:36 PM
    WhenChangedUTC                     : 12/23/2013 7:20:41 AM
    WhenCreatedUTC                     : 11/25/2013 7:51:36 PM
    OrganizationId                     :
    OriginatingServer                  : DOMAINCONTROLLER.domain.com
    IsValid                            : True
    ObjectState                        : Changed
    Thanks in advance

    Hi,
    According to your description, users cannot connect to Exchange server 2013 both internal and external.
    Please run Test E-mail AutoConfiguration in Outlook to check your autodiscover service. Also
    reset your Exchange virtual directory to connect correctly. If the issue still continues after all configurations are setting properly, collect some Event logs would be helpful.
    If there is any question, please post the results here for further analysis.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Problems connecting to exchange server

    My ipad2 was connecting fine to the exchange server a few days ago, and now it has stopped. I have been through all of the discussions and tried everything outside of a hard reset.
    Other iPhone & iPad users in my corp are having no issues connecting. I know the server, domain, username, and password are correct.
    I am getting the "unable to verify account information" . Makes no sense why it just stopped?! I am so frustrated and nothing seems to be working.
    Please help!

    Hi,
    For info. VPN Client 5.0.02.0090 has the following resolved issue stated in the readme-file:
    Resolved Issues:
    CSCsh15103 Client using a Digital Cert cant connect thru a Cable/DSL router
    It's the opposite of your problem but might be worth a try anyway?
    Also, have you tried the usual MTU change to 1300. Outlook have problems if there are any MTU issues on the way.
    //Rob

  • Can't Send email w/Apple Mail connected to Exchange Server 2007

    I've tried to connect to our OWA Exchange server w/Entourage and nobody can help me to make it work. I can connect w/Apple Mail and recieve fine, but I can't send email. Any ideas or suggestions on how to allow me to send out email w/Apple Mail??

    Hello:
    I have the same issue. I am on a Macbook Pro 2 Gb RAM Rev A. OS X 10.5.3 apple mail 3.3. I have setup a corporate exchange owa (2007) account and can receive emails. I cannot send any from this exchange account. on the same Mac I have Entourage and it can receive and send emails. What is the difference and what do I have to do to make Apple Mail work and be able to send emails as well.
    Thanks,
    [email protected]

Maybe you are looking for