Connect to internet via airport extreme via ethernet cable and no airport c

I just bought a MacBook with Airport Extreme, got it
set up today and it works great, got online, etc.
However, I have an iMac with no airport card. I
can't figure out how to get both computers hooked up
on the internet at the same time. The MacBook works
only when the ethernet cable in in the LAN slot on
the Extreme but won't work through the WAN slot. I
have tried hooking up both ethernet cables into the
Extreme, just the iMac, and nothing works. I don't
need to connect wirelessly through the iMac so I
don't want to buy an Airport card if I don't need
one. I just don't want to plug and unplug the
ethernet cable everytime I want to use the MacBook
or the iMac. My modem from Verizon only has one
ethernet slot. Any ideas?
You mean Airport Extreme Base station?
Here's what you need to do:
1. Disconnect your Verizon Modem & Airport Extreme
2. Connect the ethernet cable from the Verizon modem to the WAN of the AE
3. Connect another ethernet cable from the LAN port of the AE to your iMac
4. Turn on Verizon Modem
5. Once all lights on the modem have turned on, turn on the Airport Extreme
6. On your iMac click on Applications --> Utilities --> Airport Admin Utility
7. Setup a Wireless network using this or the Airport Setup Assistant, located in the same Utility folder.
8. After you have created the wireless network, connect to it on your macbook
If for some strange reason you still can't figure it out, refer to the product manual or check:
http://docs.info.apple.com/article.html?artnum=106858

Similar Messages

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Airport Express won't see ethernet cable and internet

I have just connected to new ISP. Airport was working perfectly before. I try to connect new modem to airport with ethernet cable and the Airport utility says nothing is connected to the ethernet WAN port and keeps telling me to plug it in but it is...I have hard reset, and rebooted everything... I am at a loss. Do I need to change IP addresses or DNS server addresses? I connect the ethernet direct to my macbook and the internet works perfectly, but I plug the ethernet into the airport and it doesn't see it. Can someone please help me, the ISP's advice is buy a router from them... but I have used airport for many years on different ISP's and they have worked. Does anyone have a suggestion besides rebooting and the paperclip?

Sorry, I am not familar with this product, but maybe some other users who have used the same product can help.
IF you have not yet performed a full Factory Default Reset on the AirPort Express, that might be a good idea, as a Hard Reset will not return the AirPort Express back to factory fresh settings.
To do this....
Power off the AirPort Express for a few minutes
Hold in the reset button first, and keep holding it for an additional 9-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart
It is unusual for the WAN port to fail, but if you continue to see the message about no connection at the WAN port, that is likely what has happened.
If you have an Apple Store in your area, you might want to take the Express to them to let them have a look.

Connecting PS3 to airport extreme via ethernet cable. Please Help!

All I want to do is to connect my ps3 directly to my airport extreme via an Ethernet cable. At the same time I want to be able to connect my computer/ipod touch to the internet wirelessly throught the airport extreme. Is this even possible? I dont want to add a airport extreme or extened my internet in anyway.

All I want to do is to connect my ps3 directly to my airport extreme via an Ethernet cable. At the same time I want to be able to connect my computer/ipod touch to the internet wirelessly throught the airport extreme. Is this even possible? I dont want to add a airport extreme or extened my internet in anyway.

Can I connect remotely to my AirPort Extreme via the Internet?

I would like to connect to the AirPort Extreme at my home when I'm on the road via the Internet and access the USB drive attached to the Extreme. The Extreme is connected to my existing DSL modem, so I can't / don't want to use the PPP dial-up mode.
Any guidance from the community would be appreciated!

The following are the basic steps to configure access to an AirPort Disk from the Internet. Note: These instructions assume that the AirPort is the only router in your network configuration. That is, it is directly connected to the Internet modem and there are no routers upstream of it.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn,) and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

Can I extend my network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have CAT5 cable throughout my house but have a wireless network w/ 3 airport expresses

Can I extend my wireless network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have a wireless network with 3 airport expresses and 1 airport extreme functioning as the base station. I have CAT5 throughout my house.

Welcome to the discussions, mib88!
Can I extend the network a second time with another Airport Express...
The short answer would be no. If you want more details, please continue to the next paragraph.
Apple's "extend a wireless network" works just like the hub and spokes of a wheel. Your main hub is either the Time Capsule or the AirPort Extreme and the AirPort Express is at the end of a spoke. You can add more devices at the ends of other spokes, but these devices will communicate directly to the hub, not to another device at the end of a spoke.
Apple does offer an option which is is known as a "static WDS", which can consist of a "main", "relay" and "remote" device. The problem here is that this type of setup has two huge drawbacks:
1) All of your faster "n" devices will drop down to much slower "g" speeds
2) The bandwidth or speed capability on the network will drop down to only 25% of the original bandwidth with a "main", "relay" and "remote" on the network.
Don't think you want this on your network. Your best option is to connect the new AirPort Express to the "hub" using an ethernet connection. If you can't run the ethernet cable, take a look at a pair of ethernet powerline adapters to accomplish the same task by sending the ethernet signal over the AC powerline in your home.

Connecting 2 Airport Extremes via ethernet if my intent is to improve wireless signal in a different area of my home

Connect the second Airport Extreme via ethernet, all is good. However, question is; do I use the same Wireless name as main Airport Extreme or do I need to name is differently? And if differently, how do devices connect to the strongest signal?

Aribia wrote:
Connect the second Airport Extreme via ethernet, all is good. However, question is; do I use the same Wireless name as main Airport Extreme
Yes. If you want your wireless devices to "see" only one wireless network, specify the exact same wireless network name, security and password for the second Extreme.
And if differently, how do devices connect to the strongest signal?
If you choose to specify different names, and your Network Preferences are configured to not "ask to join new networks" your Mac will automatically switch from one to the other, but it does not do this just because one becomes stronger than the other as you move your MacBook Pro away from one and toward the other. It will switch networks when the wireless signal falls below a threshold that is not user-selectable. It will do that whether or not you specify different wireless network names.

Bridge Mode or DHCP for two Airport Extreme via ethernet?

I have Two airport extreme setup in a six floor brownstone home in New York City. My verizon internet router is set up on the top floor with an airport extreme, my basement has the second airport extreme connected via ethernet wired from the top floor. I use DHCP from verizon internet. Do I set up my two airport extreme Bridge mode or DHCP?
Im having issues with my iphone not connecting through my basement airport extreme. Airport extreme status looks fine, green light and in working order.
Please help.

Do I set up my two airport extreme Bridge mode or DHCP?
Bridge Mode. But, you don't have to worry about this, since the configuration wizard will do this for you automatically.
Im having issues with my iphone not connecting through my basement airport extreme.
Suggest that you work your way through the iOS troubleshooting guide linked just below.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
For further assistance with iPhone issues, please post in the iPhone support forum linked just below.
Using iPhone

Connecting to an external hard drive connected to airport extreme via usb

I have two computers running off my airport extreme base station. I have a desktop computer connected via an ethernet connection and i have a laptop that connects wirelessly. I have an external hard drive connected via the usb on my Airport. I installed my airport disk utility software on my desktop as it is the computer i store all my itunes material on and it syncs to my ATV. I am able to see my external hard drive as a networked drive on my desktop, and it works fine. However i am not able to see the networked drive on my laptop. I am running Norton 360 on both machines and both machines are running Windows Vista.
Do I have to install the Airport Disk Utility on both machines? I have read thru lots of threads about this and have not been able to solve this problem. I have gone into my firewall settings and allowed file sharing on my laptop. I cannot think of anything else to do. Any help would be greatly appreciated as this is the main reason I purchased my Airport Extreme.

I have exactly the same set-up, but I can see the portable drive with my MacBookPro but not with the PC connected by an ethernet cable to the Airport Extreme. How did you get the PC to see the portable drive on the Airport?

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

Can I share my external hard drive over the Airport Extreme via the internet to someone in a different city?

Can I share my external hard drive over the Airport Extreme via the internet to someone in a different city?

Yes. Please see the following AirPort User Tip for details on several methods to do so.

2 airport extreme base stations later and still no internet connection-

Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
- The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
Any help or suggestions would be really appreciated if anyone has any ideas
Thanks for your time
Will.
UK.

http://discussions.apple.com/thread.jspa?threadID=2316
78&tstart=0
I think if you follow the instructions I gave in this
link you will be fine.
Remember, If you for any reason loose your
connection, it is normally always a Power Issue..Your
ISP is down for service ..or some other anomoly, If
you were good before your settings will still be
good...Good Luck...Don
Hi Don,
Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
Will.

How do I connect my airport Express to the internet connection of my Macbook Pro without an ethernet cable?

I would like to use my Airport Express (802.11n) to provide audio in another room for a pair of powered speakers, however the iTunes remote software for Android requires (for some dumb reason) an internet connection so I can't control iTunes
So my computer is connected to a cabelmodem via ethernet and the Express has established a network connection with the computer
How do i give the Airport internet access without an ethernet cable?

To share your Internet connection from your laptop, select 'Sharing' in 'System Preferences' and enable 'Internet Sharing'.
http://support.apple.com/kb/PH13855
You will need to set a WEP key. You may need to root the system do some things at the command line. I recommend against that.
Laptops don't work well as routers but it is possible.
Hook up the AirPort express to the laptop using an Ethernet cable and configure with the AirPort utility as if you are setting up a print server or base station. The Android should see the AirPort Express after that.
http://support.apple.com/kb/ht4587
https://discussions.apple.com/thread/2312443
This might work better if you used the AirPort Express as a base station instead of trying to use the laptop as a base station. Then your Android would have Internet access.

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme..

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.

This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection.

Connect to internet via airport extreme via ethernet cable and no airport c

Similar Messages

Maybe you are looking for