Connect to iTunes my disable iPhone to restore but the computer cannot detect my device due to network settings pls helpw
mu iPhone was disabled I followed the instruction On how to restore but the computer cannot detect my device due to network settings problem . is there anybody can Help .
iOS: Device not recognized in iTunes for Windows
Similar Messages
-
I put my iphone to restore but the computer turned off and jammed it, what should I do to put it working?
Hi jonnym2132,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If you are unable to update or restore your iPhone, follow these troubleshooting steps:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Judy -
Irecently purchased another iphone as my previous one was taken for a drive on a car roof and obviousley got off at the wrong stop..
I always dredded loosing it as they hold toooo much info ...doh
when doing a i0s 6 update off the new (second hand phone which was working perfectly ) shows -1 error
- is it possibly because it neds a systyem restore off its original computer that it was set up on..?
- it now just shows the itunes symbol and i cant even get into the iphone....
it wont do a restore or connect to itunes..........Help needed by iphone nerd/proYou have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right? -
i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore -
When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help
http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without. -
my ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls
The iPad is telling you it has entered the recovery mode - you need to follow the instructions in http://support.apple.com/kb/HT1212 for connecting to a computer running iTunes by way of the recovery mode.
-
My iTunes says "Preparing iPhone for restore" but nothing is happening on the iPhone
I put my iPhone in the computer to restore it and i load the firmware 2.0.2 because i choose not to update, iTunes Gives me the message saying "Preparing iPhone for restore" but nothing is happening on the iPhone am i dong something wrong?
Are you trying to downgrade your iOS build? That is not possible.
-
My Ipod Touch is telling me to connect to itunes, however when I do nothing happens, what can i do?
Try:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Also try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod 4th generation is stuck on recovery mode and is stuck on the screen that says to connect to the itunes store. I already tried using a non-damaged cable and connecting it to itunes, but the ipod is not showing up as a device on my computer or on itunes. I cant fix the recovery screen until i can coinnect it to itunes... so does someone have any suggestions?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
also this is the second time I have had to restore Ipad
I know how to reset time. It just want stay fixed. Its about three hours behind. The time zone is right, and set to automatic. The question on restore. I have had t0 restore twice now. I am not doing anything that I know that would cause it to crash.
When it crashes, you want know untill the next time you start up the pad from being turn off. -
hi my iphone is broken. it won't pass the connect to itunes. when i try to restore is says that there is an error. please help!
thanks,
jg2013
<Subject Edited by Host>Hello, 02633.
Thank you for visiting Apple Support Communities.
If your iPhone is disabled, you will need to process the steps in the article below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
Jason H. -
Good afternoon, I'm normally the security code disabled but yesterday as he visits I enabled it and put my usual code but my iphone 4S version 5.1.1 and says it is wrong now only ever asks me to connect to itunes or me allows you to enter the code again.
can you tell me how can I fix it? thank youDO as the manual says to do and restore your iphone
-
My iphone 4 is telling me I have to restore but when I plug in and connect to itunes, it freezes about 30-50 % through the process. Now I can't use my phone at all? I am waiting about 1-3 hours for this process to finish and nothing ever happens. HELP!!
Put it into DFU mode - hold the sleep/wake button and home button until the screen goes black (ignoring the slide to turn off slider). When the screen goes black release the sleep/wake button but hold the home button. Continue holding the home button for 10 seconds, then release it. The screen should stay black. Plug it into iTunes and it should come up with this message "iTunes has detected an iPhone in recovery mode. It must be restored before use", that's when it is successfully in DFU mode. Now press the restore button in iTunes and it should run smoothly :)
-
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
my iphone 4 is giving me the icon to connect to itunes. when i connect to itunes it says i must restore my phone. if i restore the phone, it will delete everything. how do i get my information back on the phone after i restore it??????
You can't
Apple has never approved a method to downgrade iOS
Allan
Maybe you are looking for
-
What's the best approach to automatically upload file to Sharepoint?
Hi xMII experts, Does anyone have experience on how to automatically upload the file Sharepoint(Windows Sharepoint Services) ? I tried to google but only find the below solutions: --Create a .Net application.Write the Webservice reference in the
-
When creating a new iCal event, after its title, the TAB key takes to the field "location" (logical, OK). The next TAB key goes to the "minutes" in the starting date field (illogical, not OK). From that field, hitting the TAB key takes, again to the
-
Condition Type with cost element category 1
Dear Sap expert, I have costing based copa and I am running make to stock scenario. SD team added new condition type in their pricing. This condition type is mapped to FI GL account which is a cost account (cost element category 1) while the other co
-
CS2 Not reading all available fonts
Hello, I just purchased a new Dell with an XP Professional Downgrade software package and have installed my CS2 Creative Suite on it. When I open either Photoshop, Illustrator and InDesign, it appears many standard fonts (found in Control Panel / Fon
-
EHP4 Install on ERP 6.0 with Netweaver 700
Can someone confirm for me. When installing ERP 6.0 EHP4 on an existing install do you have to include Netweaver EHP1?