Connect to iTunes with iOS7 for "Push" notifications
Since updating to iOS7, every time I start Gmail and other programs I get this type error message. I cannot find iTunes on the phone and I also there is no selection for "push" for Gmail, only "Fetch"and manual. Any ideas?
having the smae issues and tried everything but nothing is helping. heard that iPhone may need to be restored to original settings.
Similar Messages
-
I upgraded to ios7 on my iphone 4s and now many of my apps are prompting me to connect to itunes for push notifications. In most cases, i can just click ok to this prompt and carry on, but it is still a real nuisance. However with the app dropbox and find my phone, I can not get out of the prompt. I have to reboot my phone to be able to use it again. Any suggestions?
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
After my iPhone 4 was upgraded to IOS 7.0.4, some of the apps cannot be used instantly as before. For example, the Whatapps does not alert unless I open the apps manually. Then a message "Connect to itunes for push notifications" appear. Even I tried connect to itunes for sync again, this problem still cannot be resolved. The same problem applies to some other apps like Runkeeper. Don't know why.
Have you tried a reset? Hold down the home button along with the sleep/wake button until you see the apple, then let go.
-
hey guys i have a question,
so i have the same problem for two of my apps, one is biike race, and the other game is snap chat. so each time i open one of these games i repeatedly get the "connect to itunes for push notifications" box coming up, and im unable to play the game, and i have to click my home button multiple times to get back to the main screen. i dont understand why this is happening and maybe you could help me out.There are a few other threads in this forum regarding this issue. It appears to me that this was once an issue with the iPhone, but has now started up again after the upgrade to iOS 4. My iPod Touch is ~ 2 years old and has had absolutely no problems. It is not jailbroken or altered in any way.
This pop-up started for me after upgrading to iOS 4. I did the restore to factory, reinstalled my apps and the problem returned. It appears my push notifications are working, which is good, but I have to click through the pop-up every time I enter an app that uses notifications.
This will go away when Apple fixes it. -
I upgraded to iOS 7 yesterday on my iphone and now none of my apps shows me any new message and when i open the apps it says "Connect to itunes for push notifications". Please help!!!
Same here. I don't know how to solve the problem, but I figured out a way to close the app without re-starting or resetting the phone. If you click ok and then press the home button twice really fast before the dialog box shows back up, you can put the phone in multi-tasking mode and close the app without having the shut the phone off or reset it. Anxiously awaiting the fix for this since I have several apps I use that I can access at the moment.
-
Why my Iphone tell me to connect to Itune for push notification
why my Iphone tell me to connect to Itune for push notification
Did you try to connect in recovery mode, explained in this article?
If you can't update or restore your iOS device -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi, I am using a iphone 3g and i did not update it for 4 years now i have updated the software and the phone is not connecting to itunes with the error flashing error 11556
https://discussions.apple.com/thread/4977025
-
Connecting MII server with PCO for Notification
Hi All,
I am Trying to connect MII server with PCO for Notification.
I had given,
ServerName,Port ,Version,UserName and password, advanced settings also.Eventhough Iam not able to connect to MII server from PCO.So please let me know any other settings to be done to connect.Hi Parthee
Hope you are following the same steps as mentioned in the document.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/108a16e7-1448-2e10-caa3-9b18af7256b8
Have you tested your connection?
Regards
Anshul
Edited by: Anshul Sahu on Jun 24, 2011 9:34 AM -
Gateway implementation for Push Notification with SMP
Hello there,
We have a requirement for mobile application we are developing. We are using SAP NetWeaver gateway services to push the data to mobile devices (Android). We are using SMP to achieve the push notification.
We have configured SMP to receive the registration from android devices. In the back end system, we can see the subscribed devices in the table /IWBEP/D_MGW_SUB. Currently, we are using REST client to send the notification to individual device (Using <APPCID>). However, we need to send the notification directly from gate way service (ABAP side) to all registered devices on occurrence of some event (Database change). Can you please help on how to send notification from gate way service (ABAP) to SMP, and in turn to the device? And refer some documents regarding the same if any?
Thank you very much in advance!
VijayDimiter Dimitrov
For push notification, you have to use security profile as "Notification" and have to add required role as "Notification User". You can also add other authentication providers as you mentioned for MYSAPSSO2.
Settings>Security profiles>Notification(Cannot be deleted)
For APNs traffic to get past your firewall, you'll need to open these ports:
TCP port 5223 (used by devices to communicate to the APNs servers)
TCP port 2195 (used to send notifications to the APNs)
TCP port 2196 (used by the APNs feedback service)
TCP Port 443 (used as a fallback on Wi-fi only, when devices are unable to communicate to APNs on port 5223)
Send Push Notifications to the Device
Enabling Apple Push Notifications (APNS)
Regards,
JK -
ipod was disabelled and needed connecting to itunes, with countless attempts nothing happend therefore performed as reset, now instead of turning on and off, ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes, try enabelling for restore but only connec to itunes is shown consistently
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means? Thanks
0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.
-
The number pad would not let me type in a 1 2 3 for my 4 digit code. After numerous tries, the phone now says iphone disabled connect to itunes. When I connected to itunes, it asked for the code which I was unable to enter. Help!
Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
-
My iPad is disabled and it says to connect to ITunes with my Mac. It still is not working.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
No request for push notification
some of the apps don't show in settings -- Notification.
When I first downloaded and run the app, there is no any request asking for push notification.
I tried reinstall the app but still not working.That seems to be a recurring issue with no good answers that have worked for all
One thing that has helped some people
Delete the app
Do a reset of your phone Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Re download the app
Maybe you are looking for
-
How do i save files from my macbook to an external hard drive
Ive always been a PC user until recently when i purchased a macbook pro. I have an external hard drive that i used to back up all my files including word documents & mp3's etc. I now want to use the same hard drive to back up files from my macbook bu
-
ITunes won't open because it has an issue w/ Quick Time...
I went to use my new iPod Shuffle, and I got the above error message. I tried to uninstall and re-install quick-time, as recommended, but each time I do, it claims that an instillation of quick-time is already running. It goes on to say that I should
-
Dear All, I had one invoice and multiple GRNs open in GRIR account. All the Documents were for the same Purchase Order Line Item no. But there was a difference of 0.07 paise. With the help of tolerance level, these documents were cleared
-
Batch process using Nik Software - is it possible?
Hi, I'm using Nik Software (plug-ins) with Aperture and was wondering if there was any way to do a batch change? For example if I have to reduce the noise using Define2.0 and I have a profile I would like to use already, is there a faster way to proc
-
Can I use mp3 song as message tone?
I would like to use my mp3 song as message or sms tone instead of the standard tone on the iphone. My previous smart phone (Samsung Galaxy S) is able to do so. Please advise.