Connect to Microsoft OneDrive version 1.3.0.24

OneDrive maintenance release (v1.3.0.24) addresses the recent issue which is preventing our users (on the BB 10.3.0 and earlier OS releases) to login to their OneDrive account.
What’s new in this release (v1.3.0.24) that will be available from BlackBerry World today:
Updated legacy redirect URI to fix the login issue
Ensured uploaded photos are not downsized
Removed non-essential permission request (for new account or after you remove permissions for existing accounts)
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

I actually have Ver. 1.3.1.29 (on Passport running OS 10.3.1)
I didn't notice but this might have been one of the 6 apps that updated after upgrading the OS recently.
If you are expecting app updates and don't see them, clear BlackBerry World cache and check again. See http://www.blackberry.com/btsc/KB24714
- Ira

Similar Messages

The action cannot be completed. the connection to microsoft exchange is unavailable

Hi dear.
We have exchange 2013 and we want auto configure outlook 2007,2010 and 2013. In first time when we are setup exchange 2013 we can auto
configure outlook. But I don’t know now we cannot configure outlook. I think when we make some change in exchange certificate ( created by exchange in first time ) and after that we cannot configure outlook. Just we can set up pop3 and imap
for outlook. Now we have outlook with pop3 and outlook web app ( OWA ) and we don’t have problem with them, but we want our client see the all contact list in outlook. When we want configure outlook with Microsoft exchange server we get the error “
the action cannot be completed. the connection to Microsoft exchange is unavailable “.please help me. I don’t know how I solve the problem.

hi.
ok. this is the out put of autodiscover url in address bar :
"" <?xml
version="1.0" encoding="utf-8" ?>
- <Autodiscover
xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
- <Response>
- <Error Time="10:30:23.5154338"
Id="3405091169">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData
/>
</Error>
</Response>
</Autodiscover> ""
thanks for your help.
If it returns error code 600, your autodiscover service should be accessible in Exchange server. Please restart Microsoft Exchange Address Book service in Exchange server, then create a new Outlook profile in Outlook to have a try.

The connection to Microsoft Exchange is unavailable. outlook must be online or connected to completed this action

Hello,
I used to use Outlook 2010 connecting with my account.
However, after I upgrade to outlook 2013, whenever I tried to connect to my account,
it keeps saying "The connection to Microsoft Exchange is unavailable.
outlook must be online or connected to
completed this action."
I've read the other threads, I deleted my accounts through using control panel and so on, but nothing works for me.
Plz help me :(
Other office stuff such as excel,
powerpoint and word works very well.
Thanks

Hi,
If you could connect with your Exchange account with Outlook 2010 successfully and OWA works well. Then the issue might be more related to your Outlook 2013.
I would like to know your Exchange server version. Please understand Outlook 2013 is not compatible with Exchange server 2003 or an earlier version of Exchange. For more resource:
http://technet.microsoft.com/en-us/library/cc178996.aspx
Regards,
Rebecca Tu
TechNet Community Support

The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action. Error while connecting to exchange through Outlook 2010

Hi,
I have set up Exchange Server 2013 on Windows Server 2008 R2. Everything is working fine except I am unable to configure Exchange account in Outlook 2010 or any other version. It says
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Error screenshot is attached. Even, I am able to configure exchange active sync on my adroid and ipad which is working perfect. Please let me know if any body have any idea about it. Searched many blog and forum but still now solution till now.
Thanks in advance
Regards,
Manoj

Hi Manoj,
Can you ping your Exchange server? It would hlep us isolate the fault from network releated issue.
Is there a trusted certificate installed on Exchange 2013 server?
If you run the test of RPC over HTTP in
https://www.testexchangeconnectivity.com/, is there any error returned?
For more information, please refer to :
http://technet.microsoft.com/en-us/library/bb123741(v=exchg.150).aspx
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/1b4dc21c-c745-4699-8eee-423105608dcd/
Thanks.
Fiona Liao
TechNet Community Support

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

Exchange 2013 Issue - Cannot open default email folders. you must connect to microsoft exchange

Hello all, this is my first post and nightmare to this issue because i believe i made mistake and overlook something. I search over the internet i cant find the best answer or maybe i missed something during the configurations. The exchange was working fine
not after i change the setting following the method
Configure External and Internal URL in Exchange 2012. after that, the users outlook experiencing disconnect from exchange. I restore back the previous setting but now I cant add any new user to the any Outlook version or change the server path. it will
cause the problem which show the message below:
"Can't open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folder with your offline folders with your Outlook data file (.ost)"
I restarted the server and check all the Exchange services are running. The Outlook web is running and they able to receive and send out. The existing link to the exchange are still working so I not really sure what setting should i look into. I was thinking
about restoring back from Window Server Backup but was advise not to do it unless there are ways to look back the previous setting from the backup.
One of my ex-boss told me could be the Exchange Certificate but wasn't sure.
I really appreciate someone could advice and help me resolved this issue.
IT Tech Supports

Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
IT Technician

OFFICE 2013 - Word could not re-establish a DDE connection to Microsoft Query

Hi, I have installed office 2013 on a pc and used excel to run a query on a database and created a .qry query so I can use this data in word mail merge.
The query runs ok and returns the data.
However, when I go to take the data in through mail merge it comes up with a message "Confirm data source" ( I enabled this after reading kb article below) so I select "MS query files via DDE(*.qry, *.dqy)" as this is a .dqy I select
it. It says at the bottom of the screen word is starting query then comes up with the error "Word could not re-establish a DDE connection to Microsoft Query to complete the current task".
I have re-did the query from scratch and no difference I tried the recommend kb article 918594 and it still doesn't work.
I recreated the odbc link and still no joy.
Has anyone come across this and have they a solution I would be grateful.
Thanks
Tom

Hi,
Try to check whether the methods listed in the following link is helpful. The link applies to previous versions, but we can refer to it.
http://support.microsoft.com/kb/813989
Jaynet Zhang
TechNet Community Support

After lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

I've had a similar problem. On my first boot up after installing 10.7.4, Firefox would not open. Crashed every time. Safari was not affected. I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago.
Here's what fixed it: a second boot up.

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

'authentication failed' using Microsoft ADSI version LDAP server

Hi All,
Now days i am facing some problem in authentication (i am using microsoft ADSI version LDAP Server) but am not able to authenticate the LDAP users.
I have configured my LDAP server in the same manner as u mentioned in this blog.
when I am trying to authenticate the user from the RPD itself i m gettig the following error:
“authentication failed” (actually i forgot the exact message but it mean is same as i referred here)
though i am able authenticate the bind user ( which i used to configure the LDAP Server)
Please help me in this as i already wasted a lot of time in doing R&D to make it work..
I have an urgent requirement to do the same..
Your help will highly appreciated…
thanks in advance
PS: I have checked the 'ADSI' box in advance tab:

Hi,
Please have a look at the below link:
Unknown certificate error when testing LDAP SSL connection
Not sure whether it will help you. But have a look at it.
Regards,
Jithin

JDBC connection to Microsoft SQL Server

How connect to MS SQL 2000 using JDBC from Oracle(java stored procedure) ?
I can connect to Oracle jdbc:
create or replace and compile java source named Hello as
import oracle.jdbc.driver.OracleDriver;
(C:\oracle\bise1\db\jdbc\lib\classes12.zip\oracle\jdbc\driver)
But I don't know how to connect to
Microsoft sql server?
sorry answer in
Re: Querying MS SQL Server from PL/SQL with JDBC
1)download
Microsoft SQL Server 2005 JDBC Driver 1.2
2)C:\oracle9i\bin>loadjava -user scott/tiger sqljdbc.jar
import com.microsoft.sqlserver.jdbc.SQLServerDriver;

Hello,
SQL Server Express will go to sleep if idle, this behavior is not configurable.
When SQL Express transitions from idle to active some of the memory that was released needs to be reclaimed; this results is a slight lag during "startup time" when you're first connecting to SQL Express.
The other sort of sleep occurs when a database with AUTO_CLOSE unloading itself after a period of inactivity. This can be resolved by setting AUTO_CLOSE to false.
You can refer to the following blog about more details about this:
http://blogs.msdn.com/b/sqlexpress/archive/2008/02/22/sql-express-behaviors-idle-time-resources-usage-auto-close-and-user-instances.aspx
You can try to upgrade the SQL Server Express to a non-free version to get rid of this.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

ORA-03134: Connections to this server version are no longer supported from 11.2 to 9.2.0.8 database

Hi,
I am using the ODP.NET 11.2 (Oracle.DataAccess.dll 4.112.3.0) for .NET 4.5 (in Visual Studio 2012). I can connect to 11g Databases but when trying to connect to 9.2.0.8 database this error is thrown:
ORA-03134: Connections to this server version are no longer supported
I don't understand why, as I could connect using Toad, but not from a .NET application.
By the way, I'm using Windows 7 64bits.
Any idea?
Thanks in advance,
Dave

Thanks Mark for looking into this.
The GAC contains the following assemblies:
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.17929
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.102.4.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=AMD64
Oracle.DataAccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=AMD64
Oracle.DataAccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Oracle.DataAccess, Version=2.121.1.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Oracle.DataAccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=AMD64
Oracle.DataAccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Oracle.DataAccess, Version=4.121.1.0, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Number of items = 7
As you can see, I have been trying with different versions but nothing. Anyway, as far as I know if the referenced library in VStudio is marked as CopyToLocal, it shouldn't take any library from GAC.
And SQL query is returning this info:
PRODUCT
VERSION
NLSRTL
9.2.0.8.0
Oracle9i Enterprise Edition
9.2.0.8.0
PL/SQL
9.2.0.8.0
PRODUCT
VERSION
TNS for HPUX:
9.2.0.8.0
Thanks.

Office 2013 - The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete.

Hi Team,
Just purchased and downloaded Office Home Premium and having trouble with Outlook. For what ever reason, I am unable to create account/add my email address ([email protected]) into the program. Through the set-up process it continuously
tells me that it is unable to connect to Microsoft Exchange, and that it must be online or connected to complete. In the end, it comes up with this pop-up listing a file. Something like that. Any pointers on how to resolve this or are a lot of people having
this problem..
Also, I installed this on my laptop (OSX 10.8.2)
and it worked fine, but not on my desktop (Win8 Pro 64-bit)
Thanks
Andi

Hello,
Does OWA work?
Does this issue occur on other users?
In Exchange 2013, most of the internal and external client becomes to use Outlook Anywhere(RPC over http).
Please make sure the autodiscover.domain.com is included in the certificate.
Thanks,
Simon Wu
TechNet Community Support
Hi I am having the same issue. Brand new computer, using Office 365 and trying to set up Outlook 2013 on Win 7 machine. OWA works fine. But cannot set up Exchange on my desktop.
I don't know what you mean by "In Exchange 2013, most of the internal and external client becomes to use Outlook Anywhere(RPC over
http).
Please make sure the autodiscover.domain.com is included in
the certificate."
Can you please walk me through this? Thank you.

BIB-16633 Cannot connect because the database version is incompatible with

BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
Reply
why is this?
oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
at oracle.dss.connection.client.Connection.connect(Connection.java:425)
at oracle.dss.connection.client.Connection.connect(Connection.java:342)
at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Lisa Sherriff
Posts: 137
OTN Member Since: Jan, 2001
Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
Reply
Hi,
From the 10.1.2 BI Beans Install Guide it says:
OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
* Oracle9i Release 2 Enterprise Edition, as follows:
o 9.2.0.6 for all platforms.
o 9.2.0.5 with the latest OLAP patch for Windows-only.
* Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
From the error message it would appear that the Database is not one of the above.
Thanks,
Lisa
JDev QA
401488
Posts: 48
OTN Member Since: Aug, 2002
Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
Reply
Hi,
Please note that we have follwing versions of DB up and running:-
1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
Pls let us know the solution to resolve this problem ASAP.
Thanks.

You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
10g - 10.1.0.3 with additional OLAP patch
9i - 9205 with additional OLAP patch
9i - 9206
I would suggest that you have not applied all the required database patches to your instance.
Hope this helps
Business Intelligence Beans Product Management Team
Oraclc Corporation

Connect to Microsoft OneDrive version 1.3.0.24

Similar Messages

Maybe you are looking for