Connect to older display

Is there a connector that will let me connect to an older Apple 30" flatscreen monitor? My Mac Book Pro was purchased in September and has a thunderwire connector...but is there an adaptor that will let me hook up to an older 30" Apple display?
Thank you,

Use the same type of connector you would to connect that display to a Mini DisplayPort. For a 30-inch Apple Cinema Display, this is a MiniDisplayPort to dual-link DVI adaptor.
(64159)

Similar Messages

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

I believe you naeed the Apple ADC to DVI adapter.

How do I connect an older imac to my new imac to use as a second monitor?

Hi !
I was wondering if it were possible to connect an older imac to my new imac to use as a second monitor?
My older imac is from 2006. The new one is a 2012 imac.
Any advice would be appreciated.
Thanks,
JC

http://support.apple.com/kb/PH4469
Look this article over, the key is to connect either mini display port or thunderbolt and using CMD+F2, let me know if this helps or if it doesn't work out. I'll find another solution if this doesn't work Joel ^_^

Connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?

Hello Fellars,
Is it possible to connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?
Best regards,

That means i can either buy a new Macbook WITH Thunderbolt AND a Thunderbolt Display or
use my 2009 Macbook Pro with Displayport and an older Display??

Problem waking MacBook Pro when connected to external display

I have the new 13" MacBook Pro and like to use it connected to an external VGA display (Xerox) with the MacBook Pro in closed clamshell mode. The problem I am having is that after working for a a few hours, when I put the Mac to sleep with mains power connected, usb keyboard connected and the external display connected (via mini display to VGA adapter), the Mac will sometimes refuse to wake. I have a wireless Mighty Mouse also and the Mac is set to wake with Bluetooth devices. When I click a key on the keyboard or click the mouse a few times the pulsing sleep light at the front of the Mac goes solid but nothing appears on the external display. If I open the MacBook Pro the solid light goes out but the Mac does not respond. If I close the MacBook Pro display, the solid light comes on again. I have no option but to force a restart. This is an intermittent problem. I have yet to have this happen when no external display is connected.

I have the exact same problem.
Here's my story:
To give you some backgroud, my setup involves having the macbook on a mstand hooked up to an external monitor. I run a usb hub from my macbook, this is where my mouse transceiver is plugged in. I use am Apple wireless bluetooth keyboard (latest slim model)
I recently purchased the 13.3' inch 2.26 MBP as I gave my older 2.0 uMB to a family member. The computer is in the stock configuration with no hardware upgrades.
I have noticed weird behaviour when waking the computer from sleep when the lid is closed. When i wake the computer up (by tuning on bt keyboard), the keyboard light blinks like there is not bt connection and the computer will wake in an inactive state. The led light will be on, but when i flip the screen up....nothing. Screen is dark, keyboard pressing does not illicit any responses. I have to do a hard reboot by holding down the power button to restart the computer. Unfortunately any previous data or work is lost.
I work in IT so I completed troubleshooting and also things outlined on forums in google. Reset PRAM, reset SMC and also reinstalled OSX. Still I get the same result. Fearing I purchased a defective unit, I called Apple and they told me i could exchange the computer so I dropped by the apple store and exchanged it quite easily.
I've spent hours restoring from time machine and I am experiencing the same issue on my new laptop. I'm now assuming its not hardware but more firmware related as I had to do a bluetooth firmaware upgrade when I bought the computer when I checked for software updates.
Is anyone else having any wake issues with their new MBPs? And what should I do next? Should I exchange for a 3rd unit? Thanks for you help everyone.

Hi, I'm need connect the thunderbolt display to my MacPro , but the connection is mini display, you have any adapter for that?

hi, I'm need connect the thunderbolt display to my MacPro , but the connection is mini display, you have any adapter for that?

unfortunately, will not work ever
your mac needs tb on it to use a tb display; the older mac pro's use the apple led cinema display

Connecting a Cinema Display

Can I connect an older Cinema Display (65W) with a Dell laptop? I've got HDMI and USB ports only.

Hi taniabudgie,
If you'd like to use an Apple Cinema Display with a Windows PC, then you just need to connect to the display's DVI connection using an HDMI to DVI converter cable.
The Apple Cinema Display product line features the industry standard DVI connector, which allows it to be connected to a variety of computer systems, including both Apple and Windows-based computers. The DVI connection, along with the VESA DDC support, removes the barriers to using an Apple display with a non-Macintosh PC. As long as your graphics card supports the full single link and/or dual link bandwidth defined in the DVI specification and incorporates DDC technology, your PC graphics card will support the Apple Cinema Display line.
The 23-inch Apple Cinema HD Display and the 20-inch Apple Cinema Display require a single link DVI signal. The 30-inch Cinema HD Display requires dual link DVI support to drive its massive amount of pixels.
Using Apple displays with computers running Windows
Take care,
Alex H.

Connecting 15" studio display LCD to MacPro

Do I need the DVI to ADC adapter to connect my "old" 15" Studio Display (LCD) to the MacPro?
Just bought the MacPro, upgrading from my G4 Powermac circa 2001. No one at the Apple Store mentioned needing an adapter even though I said I had an older display from 6 years ago. I am not happy to say the least. Partly went for the MacPro because I had this display, though small by current standards. Now another $100 I did not expect.
Any recommendations for displays...at a smaller price? Maybe I should have gone with an iMac....
Thanks.
Jen

No one at the Apple Store mentioned needing an adapter even though I said I had an older display from 6 years ago.
Unfortunately hardly anyone stops to think that some older Apple displays used the ADC adapter. I bet half of the staff don't even know what an ADC connector is. Anyway, yes you will need the ADC to DVI adapter unless you can already convert your video signal to VGA. In that case you can then use the includes VGA to DVI adapter that was included with your Mac Pro.
Any recommendations for displays...at a smaller price?
You can try Dell. They often have specials which results in very cheap displays.
Maybe I should have gone with an iMac
My parents just bought iMacs (24" with 2.33GHz upgrades) and while they're very nice they can't come close to the performance of the Mac Pro, especially if you implement RAID 0. So while you might be a bit deflated over this just remember that you did buy a far better performing system.

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

as far as I know then the target display mode is not an option with such an old mac

NVIDIA OpenGL driver lost connection with the display driver

Alienware M14x Laptop
Windows 7-pre 64-bit
8gb ram
3gb Video: NVIDIA GeForce GT 555M
Intel i7 2760QM
AE CS4
AE keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or changing opacity of a layer. in 1080p, I have a picture layer, a solid, some color corrections, and that's it. i just got this new computer and i have never had this problem on my old computer.
this message appears after AE crashes."The NVIDIA OpenGL driver lost connection with the display driver and is unable to continue. The application must close."
this message appears in the taskbar: "Display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop AE from causing my display driver to stop working?
Thanks, Ramzi Rebeiz

For anyone picking up this thread (it's probably too late for rrebeiz40 by now!) I have come across a simple but apparently very effective tip that has solved the 'OpenGL driver lost connection' issue for many people using various NVIDIA with various Adobe progs (incidentally a lot of these seem to crop up on Dell machines, especially Notebooks).
(It fixed my issue with Premiere Pro CS4 - GeForce GT 555M on Win 7 Ultimate 64-bit, Dell XPSL702X).
It's posted on http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40 (look for the last post, No 50) as follows:
THIS FIX APPEARS TO WORK...found on an Adobe forum
"This issue led me to this fix: go to NVIDIA Control Panel --> Manage 3D Settings --> Global Settings, and switch "Power Management Mode" to "Prefer Maximum Performance" (the default "Adaptive" setting seemed to be the culprit). And that's it! The key here is changing the "Global" setting, as my individual programs were already set to "Prefer Maximum Performance." I can cause the error to reoccur by changing back to "Adaptive."
Otherwise lots more ideas on this site: http://www.instructables.com/id/How-to-Fix...Nvlddmkm-Error/
My PC has been running for 2 days now. I only put the top fix in for now. Feel happier I have more options if need be though.
Inserted from <http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40>
It worked for me

Connection to external display does not work under windows bootcamp, with a thunderbolt to vga adapter.

Hello guys, after searching a lot in the forum for an answer to this, I could not find a solution so this is the reason for this post.
I have a Macbook Pro (early 2011 I think) running MacOSX Lion and I have installed Windows 7 64-bit through bootcamp (version 4.0).
Everything works fine except that I cannot connect my external display through my thunderbolt-vga adapter.
The external monitor shows only the boot screen of windows (the one with the windows logo) and then, when I get into the login page it goes blank.
After reading the forum, I have done several things in order to fix this problem such as:
Restarting the macbook with the thunderbolt device connected to it.
Updated to the latest ATI drivers through bootcamp.
Removed the graphics driver and re-install it again.
I have tried to identify the external monitor through windows 'screen resolution' tool (attached photo).
but still no luck.
Does anyone have any idea on what else I could do in order to fix this? By the way, I find it very frustrating that Apple does not have a stable solution to the problem with devices that are connected to the thunderbolt port.
Thank you in advance

and here is the attached screenshot

How to connect my studio display with a Apple display connector to my new mac mini

How can I connect my studio display with a Apple display connector to my new mac mini?

https://discussions.apple.com/message/8315498#8315498

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

What model (year) MacBook Pro? Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
What model (yeasr) and size (17", 20". 22" ...) display. Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors.

How to connect a Cinema Display to alternative input?

I want to upgrade my Mac Pro (2009) to a reasonably priced graphics card but there are very few that have a Mini Displayport input.
How do I connect a Cinema display with only a Mini DP to an HDMI, Displayport or DVI input? (and still use the sound)
I've looked for Mini DP(female) adapters and can't find any.

I'm unsure of the issue, the Mini has both mDP and HDMI outputs, right? If so, the mDP for the Cinema Display an a HDMI to VGA adapter for the 2nd monitor.

TS3354 "To play this movie in HD, you must have a PC with a built-in display or have it connected to a display that supports HDCP."

I recently reinstalled restored my Toshiba laptop with Windows 8 to factory condition. I reinstalled iTunes, and now when I try to play a movie, I get this error message: "To play (name of movie) you must have a PC with built-in display or have it connected to a display that has built in HDCP." This happens with both my downloaded movies and my iCloud movies. It never did this before. Any suggestions?

I have the exact same problem. I watched both AnchorMan 2 and The Hobbit Desolation of Smaug a week ago on my set up. BenQ monitor ATI Radeon HD 5700 Series Video card. No issues. Then I reformat and all of a sudden my purchased movies give me that error. It's so frustrating.
The odd part is for the Hobbit the itunes extras will start just like before, however I can't select a scene.
How is there no response to this? Are we missing something obivous? A default setting? Driver?
Help please!

Connect to older display

Similar Messages

Maybe you are looking for