Connect to OpenDirectory failed Error 21

Hello,
i tried this afternoon to connect two Mac OX Lion Clients ( macbook pro ) to our existing Mac MIni Server Opendirectory.
In both caes i got the error message:
Die Verbindung zum Verzeichnisserver konnte nicht hergestellt werden. – 2100
The Lion server is running and our other two clients can use network accounts without any problem.
The certificate at serverside is self signed and all machines are running Lion and are updated to current relaese level.
Any help or suggestion what to try next ?
Thank you very much in advance.

No I didn't add my self signed certificate to keychain. It is already there for mail , adressbook and caldav.
It is set to "trust allways".
Time server shows the identical time on Lion server and the client machine(s).
Yes I did it the way you describes in your email system preferences, accounts ....
Excuse me please : What is meant by directory utility ?
No I didn't try to rebuild key distribution center. Should I do ?
I will setup logging tomorrow morning and hope to provide useful information
Thank you

Similar Messages

"Connection to server failed" error with Gmail exchange server

Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75

I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

Connection to hostname failed - Error 709

Hello All,
We are using a Linux system with EP 7.0 installed on it.
After restarting the system, it shows as :-
"Error while connecting to hostname failed - Error 709"
and when we do "nslookup"
it shows as :- "Connection to DNS server failed"
but when we type "hostname" , it shows corectly.
Could any one share more light on this. ??
Thanks in adv.
Regards,
Manomeet Moahapatra

hi manomeet,
inside of using ur host name name use the host name ip address and also check the dns server ip address in tcp/ip property.
Regards.
Kalenthirababu.p
"Reward point it will always encourage me to answer more question"

In Notification Center, Whenever I try to send a tweet I get the "tweet cannot be sent because connection to Twitter failed error" What do I do? This is happening on 10.9 Mavericks

I see that Apple has had the same issue in 10.8 since I read http://article.wn.com/view/2013/03/21/Fix_Connection_to_Twitter_failed_when_twee ting_from_OS_X/. But I'm not sure what to do now since I have not been able to find a fix for 10.9 Mavericks

Try reading this article. It might help you: http://www.cnet.com/how-to/fix-connection-to-twitter-failed-when-tweeting-from-o s-x/
Thank you!

Connection to [i]server[/i] failed (Error NT_STATUS_IO_TIMEOUT)

Hi there,
I'm a long time linux user (casual) and have recently got hold of a machine that I am using as a server. I am able to SSH into this fine from my laptop and I am doing all the setup from ssh.
I am trying to set it up so I can use Samba, however keep getting the following error
# smbclient -L [i]server[/i] -U%
Connection to [i]server[/i] failed (Error NT_STATUS_IO_TIMEOUT)
I thought I had followed the samba set up wiki to the letter
My smb.conf looks like so
[global]
usershare path = /var/lib/samba/usershare
usershare max shares = 100
usershare allow guests = yes
usershare owner only = false
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *pass$
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = yes
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
[i]<everything else is commented out>[/i]
I have no windows machines so it's only my laptop and desktop both running linux that I need to connect to this. I have tried googling and searching these forums to no avail
Thanks for any help that can be offered
Mike

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset.

Connection Failed Error while Importing tables in 11.1.1.6 on Windows 7

Hi,
Can you please help me in resolving the connection failed error while importing the tables from the database.
I am using OBI 11.1.1.6 on Windows 7
You help is highly appreciated. I have followed all the below blogs but still i was not able to resolve the issue.
http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
http://obieedeveloper.blogspot.in/2012/03/connection-failed-error-in-obiee-11-g.html
http://iadviseblog.wordpress.com/2011/05/29/obiee-11g-error-in-importing-metadata/
http://www.obieefans.com/%E2%80%9Cthe-connection-has-failed%E2%80%9D-error-in-obiee-11g-admin-tool/
Thanks in Advance
Siva

It would be nice if you put your issues instead of asking to look those many urls.
try using tns entry in connection pool or follow this thread
Connection failed in OBIEE 11g

Connection Failed Error in OBI 11.1.1.7

Hi,
While trying to import the metadata from the Oracle Database i am getting the "Coonnection Failed" error in OBIEE 11.1.1.7 on windows 7.
For this i have followed the below steps:
1. Copy the tnsnames.ora file from Oracle Database.
Path : C:\oracle\product\10.2.0\db_1\network\ADMIN
2. paste the file to the below location in OBIEE11g directory
C:\OBIEE11g\Oracle_BI1\network\admin
C:\OBIEE11g\oracle_common\admin
Can you please let me know whether i am missing any steps to import the metadata successfully.
Thanks in Advance
Siva

Which DSN have you selected in the connection pool?
Try to do tnsping to the database that you are connecting to and make sure everything is fine.
If everything is fine, try to copy the entire tns string in the connection pool where you specify the DSN.

I can't log on to itunes account. Keep getting the error: Connection Manager::invoke::Failed to find service connection url. What can I do?

I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?

Hi, Buster1932.
I would recommend logging out of your account then logging back in. If the issue persists, see the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

Flex/Zend channel connect failed error...

Hi guys.
    I am using Flex and php to develop my project. Everything works great in my local machine. However, when I upload my files to my server (godaddy.com). I got the error when loading my flex application.
The pop-up error message is
send failed
channel.connect.failed.error
Netconnection.call.Badversion: url:
http://mydomail/folder/gateway.php
I have upload my ZendFramewrok folder into my server and amf_config.ini has been configured. (webroot =http://mydomain)
I am not sure what's going on here. Please help. Thanks.
Update: my gateway.php
<?php
ini_set("display_errors", 1);
$dir = dirname(__FILE__);
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "$dir/amf_config.ini";
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library'; //I did upload the ZendFramwork folder
//Load ini file and locate zend directory
if(file_exists($configfile)) {
$arr=parse_ini_file($configfile,true);
if(isset($arr['zend']['webroot'])){
$webroot = $arr['zend']['webroot'];
$zenddir = $webroot. '/ZendFramework/library';
if(isset($arr['zend']['zend_path'])){
$zenddir = $arr['zend']['zend_path'];
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
$dirs = $amf->directories->toArray();
foreach($dirs as $dir) {
     // get the first character of the path.
     // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
     $length = strlen($dir);
     $firstChar = $dir;
     if($length >= 1)
      $firstChar = $dir[0];
     if($firstChar != "/"){
      // if the directory is ./ path then we add the webroot only.
      if($dir == "./"){
       $server->addDirectory($webroot);
      }else{
       $tempPath = $webroot . "/" . $dir;
    $server->addDirectory($tempPath);
}else{
      $server->addDirectory($dir);
// Initialize introspector for non-production
if(!$amf->production) {
$server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
$server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
Error from gateway.php if I call it directly.
Warning: require_once(Zend/Loader/Autoloader.php) [function.require-once]: failed to open stream: No such file or directory in /home/content/79/4687979/html/parkerList/gateway.php on line 27
Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.:/usr/local/php5/lib/php:http://blackwheels.info//ZendFramework/library') in /home/content/79/4687979/html/parkerList/gateway.php on line 27
gateway.php is the rat. but I still can't figure out what's wrong. Zend/Loader/Autoloader.php is under the server root "ZendFramework/library" folder. I don't understand why my application can't find it. Thanks again!

You will get a better response if you repost your question on the Flex forums. This forum is for the Livecycle Data Services product.

Connection Failed errors freezing iDVD when trying to do Magic DVD feature

Whenever I try the Magic DVD feature lately (it used to work), iDVD freezes and I have to force quit. It repeatedly gives Connection Failed errors. But, strangely enough, if I simply make a new iDVD project (not through the Magic feature), it works just fine. I don't know of anything that I've done to cause this error. Tried messing with .plist files and don't want to do that again (seemed to cause bigger errors).

Hi
No not really any of them.
I suggested this to find out where the trouble resides.
• If the new account works. You solved an acute situation and the problem is most probably a
pref file.
=> Delete the one in first account or even re-install iLife
• If not - a more severe trouble shooting is of need
Yours Bengt W

Connection refused: proxy: HTTP: attempt to connect to failed [error] ap_proxy_connect_backend disabling worker

Hi all,
I'm investigating cause of a wedged wiki this morning. The MacMini (10.7.5) was working well for the last year but we're not sure when it gave up the ghost.
I've already applied the fixes detailed at Mac OS X v10.5, Mac OS X Server v10.5: Web, Mail, Wiki, Personal Web Sharing, Parental Controls services may not start after restoring a Time Machine backup but it has't helped.
The error we see when we visit the top level of the server is:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.22 (Unix) PHP/5.3.15 with Suhosin-Patch mod_ssl/2.2.22 OpenSSL/0.9.8r DAV/2 Server at sacmini.local Port 80
The message in the httpd error logs is:
Connection refused: proxy: HTTP: attempt to connect to failed [error] ap_proxy_connect_backend disabling worker
Let me know if you have any ideas. Thank you.
--Athonia

Thanks for the reply.
So, there were some Ruby related log file entries. Do these have any meaning to you? I'm checking to see what collabcored2 does exactly.
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config/environment.rb:11
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config.ru:13
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /Library/Ruby/Gems/1.8/gems/rack-1.2.1/lib/rack/builder.rb:46:in `instance_eval'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /Library/Ruby/Gems/1.8/gems/rack-1.2.1/lib/rack/builder.rb:46:in `initialize'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config.ru:1:in `new'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config.ru:1
May 7 14:22:33 sacmini com.apple.launchd[1] (com.apple.collabcored2[22106]): Exited with code: 1
May 7 14:22:33 sacmini com.apple.launchd[1] (com.apple.collabcored2): Throttling respawn: Will start in 9 seconds

CJS-30196 Connect to SAP gateway failed: Error during installation

Dear Experts,
Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
ERROR 2009-08-04 08:28:43
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'node1:sapgw03' not reached
TIME        Tue Aug 04 08:28:43 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1
ERROR 2009-08-04 08:28:43
FCO-00011 The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
Regards,
Ritesh Bhatia

Hi Guys,
I am installing Ecc6 on my laptop. While installing i have got a below error...
ERROR 2012-01-24 06:58:02
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A
ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION
CPIC (TCP/IP) on local host with UnicodeERROR       partner
'ecc6:sapgw04' not reachedTIME        Tue Jan 24 06:58:02
2012RELEASE     700COMPONENT   NI (network interface)VERSION
38RC          -10MODULE      nixxi.cppLINE        2764DETAIL
NiPConnect2SYSTEM CALL connectERRNO       10061ERRNO TEXT
WSAECONNREFUSED: Connection refusedCOUNTER
ERROR 2012-01-24 06:58:02
FCO-00011 The step createJSF with step key
NW_Onehost
ind
ind
ind
ind
0
0
NW_Onehost_System
ind
ind
ind
ind
1
0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Could you please provide some solution for this?
with regards
Vinayak

*** ERROR = Connect to database failed, rc = -4008 (POS(1) Unknown user na

Hello
I have just finished a dbcopy of Maxdb 7.6 to a new system with initilization.i can bring the db online. I have ran the xuser command to fix the db users as below command as per note 39439
i changed them in home dir of sidadm,sqdsid
                      xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
c) DBM user: for example, CONTROL.
                       xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
d) SYSDBA user: for example, SUPERDBA.
                       xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
But iam having the below error now when trying to bring the SAP system up in dev_w0
C Try to connect (DEFAULT) onconnection 0 ...
C
C Mon Dec 19 21:46:11 2011
C *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combinati
on)
[dbsdbsql.cpp 137]
B ***LOG BY2=> sql error -4008 performing CON [dbsh#3 @ 1208] [dbsh    1208 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dbsh#3 @ 1208] [dbsh    1208 ]
B ***LOG BY2=> sql error -4008 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1537]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10837]
M
is there something that i missed somewhere?
Any ideas welcome

erpsyscs1:cs1adm 46> xuser list
XUSER Entry 1
Key         :DEFAULT
Username    :SAPCS1
UsernameUCS2:S.A.P.C.S.1. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>

Test conn. SAPOSS error when opening an RFC connection SNC processing fail

Dear all,
   I configured a Saprouter in DMZ with SNC connection type to establish connection from my company to SAP and vice-versa. Also I accept connection from external company to our SAP systems. During the test in SM59 SAPOSS connection I receive the following error:
Logon     Errore di colleg.
Dettagli err.     Error when opening an RFC connection
Dettagli err.     ERROR: SNC processing failed: SncSessionInitiatorAK
Dettagli err.     LOCAZ.: SAProuter 39.1 (SP3) on 'srvsaprouter1'
Dettagli err.     DETT.: NiSncIInitHdlSecurity: sncrc=-4;0x9d9350
Dettagli err.     COMPONENT: NI (network interface)
Dettagli err.     CONTAT.: 209
Dettagli err.     MODULE: nisnc.c
Dettagli err.     RIGA: 1091
Dettagli err.     VALORE RIT.: -104
Dettagli err.     SUBRC: 0
Dettagli err.     RELEASE: 710
Dettagli err.     ORA: Fri Jul 17 11:01:22 2009
Dettagli err.     VERS.: 39
My saprouttab for SAP AG connection is the following:
#SNC-connection from and to SAP
#KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.229 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.229 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.211 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.211 3600
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.209 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.210 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.231 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.231 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0s.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0sc.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.242 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.242 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0t.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0tc.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.215 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.215 50100
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0p.calpeda.priv 50100
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0pc.calpeda.priv 50100
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
#P <IP-addess of a local PC> 194.39.131.34 3299
P * * *
P * 194.39.131.34 3299
D * * *
Any suggestions?
Thanks in advance.

SNC processing failed could mean lots of things... did you installed the SAPcrypto library?.. did you created the certificates correctly?...
Read SAP notes 812386 and 33135.
Regards
Juan

Connect to OpenDirectory failed Error 21

Similar Messages

Maybe you are looking for