Connect to printer via Express via Extreme

I have a Canon printer connected via USB to my Extreme base station which is connected to my DSL modem. It prints fine. I run an internet connection off of the ethernet port and send it to an Express base station to my shop. My question is this - Is it possible to print from this Extreme base station via the Extreme base station that is connected to the printer?

Answered my own question. Got it to work via Bonjour. It wouldn't recognize the printer earlier but works fine now. Prints from both my Powerbook and a PC running XP.

Similar Messages

Connecting network Printer to laptops via wireless

My daughter received a new Toshiba laptop for Christmas to help with her school work and I have been working to get it setup. I have nearly everything working fine including a network connection for internet through my network router, but I am having difficulty with connecting the laptop to my network printer. I have a Belkin F7D3302 v1 wireless router that serves as my network router and this Belkin router is connected via an ethernet cable to my desktop and the router is also connected wirelessly to my Alienware laptop (both run Windows 7) - I have full connectivity with both of these computers and no printing issues - I also have an older Sont Vaio laptop that runs Windows XP SP3 - it is also connected wirelessly to the network and I can print from this computer without any problem. I went into my daughter's computer to install the printer and although it found the printer the TEST PAGE would not print and the computer shows the printer as being offline. I did do a look at the Network Config on the printer and it shows the IP address as all zeros which I found odd, but my Alienware and Sony are conected so I should be able to get my daughters laptop to connect. Any help would be appreciated to get my daughters laptop connected to the printer

I have rebooted the laptop multiple times while using HP Scan and Print doctor, but to no avail. I am baffled largely because the ISP service connected between the Belkin router and the laptop without any difficulties and although when I click on Add Printer it shows the network printer it shows the status as offline continuously - when i try to start the HP software direct on the laptop (I installed the original HP software to the laptop) it says it cannot start because the printer has not finished installing. I am guessing it is either a Win 8.1 issue of some sort.

Connect iMac to Airport Express via ethernet cable?

I get poor performance using AirPlay to connect to my stereo with the Airport Express on the wireless network in my apartment building. The wireless router is on a different floor, and on the opposite side of the building, which I believe is the cause of the intermittent signal -- the music cuts out and back in constantly.
However, my workstation is very near the stereo, so I think I should be able to run an ethernet cable directly from my iMac to the Express. How do I set this up, though?

Hi there frustrated newbie 2014,
You may find the troubleshooting steps in the article below helpful.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

Why can I no longer print from my Windows XP computers to my Bonjour connected Canon printer thru an Airport Extreme Base Station (f/w 7.6.4, model A1301)?

Something has changed recently and I haven't figured it out. My 2 Windows XP computers are no longer able to print via Bonjour. I have tried removing and reinstalling Bonjour. Upgrading the firmware on the AIrport Extreme Base Station and comparing Port settings from an able to print Windows Vista laptop. Port settings match and Bonjour says it sees the printer...but the communication is not happening between the computer and the networked printer, it times out and produces an error in the print que. Both XP computers have no problem using the internet via the Base Station. One is wired and one is wireless. Thoughts?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

How do I print from a Windows7 PC to an already connected USB printer on an Airport Extreme?

I currently have an Airport Extreme set up to serve my house, with a printer plugged into the USB port on the Airport. I have since bought a Windows7 Laptp for work and I want to print to he existing printer. How do I do this? My existing Powerbook works just fine.

Install the Bonjour Printer Wizard:
http://support.apple.com/kb/DL999?viewlocale=en_US&locale=en_US
Regards,
Shawn

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

Connecting HP LaserJet P3015 printer (via Cat5e) to Extreme base

I've configured my network (thanks to the help of this forum):
Airport Extreme Base station (extended by Airport Express).
My laptops (connected wirelessly) run OS10.7.5. I am using Airport Utility 6.3.1
I am attempting to configure an HP LaserJet P3015n (which apparently is part of the HP3010 series) via ethernet cable. I've connected the ethernet cable from Airport Extreme to printer.
Previously, I had successfully configured the HP3015n via USB cable when my Airport Express was my "main" base station.
But now I'm unable, since configuring the Airport Extreme as my main base station and the printer via Cat5e cable, to get the HP3015n recognized via Print & Scan in the Sys Prefs or through the printer window (e.g. when you print a doc via MS Word).
I read this Apple Support Doc: "OS X Mountain Lion: Set up an IP printer" (even though I'm using 10.7.5) to see if I could glean some info.
http://support.apple.com/kb/PH11478?viewlocale=en_US
What I've done or noted:
1) removed the old p3015n listing from that I had configured via USB in case something needs to be reset
2) selected the 3015n printer (via the + sign) and tried to add software drivers for it. I select the 3015n printer as the one listed "nearby" printer (and I wonder if that printer is coming up because it was previously configured on my network or if this is a "fresh" "sighting" by my network? When I do attempt to download software for it, Apple at first reports that the software is avail but after what seems to be an attempted download, that it can't be installed.
3) I note that the HP printer address (which I gleaned form the printer's LCD screen) is 10.0.1.9
4) The driver appears to be named 3010 even though the printer is 3015. Previously I had installed the 3010 driver and that is the name by which the printer has previously been recognized.
5) I was able to printer out some pages on the printer via the LCD screen with all kinds of info. Including an "Embedded Jetdirect page," "Embedded Protocol page," and a "Configuration page." My understanding from reading a few Apple Support Docs previously is that Jetdirect is among the ways that I can configure the printer. So maybe that is one way?
Thanks for your time and insights!

Most older HP LaserJets must be assigned a new static IP address any time the router changed. Based on the excellent information in this thread and others, I compiled a complete protocol for doing this and in particular when using a newer (2013) Airport Extreme. My printer is an HP LaserJet 4050N.
Connect the LaserJet to one of the Airport Extreme's ethernet LAN ports using a Cat5e cable.
Open the Airport Utility
Click on the Icon of the base station to confirm the LAN IP address (usually 10.0.1.1).
Click the Edit button and then the Internet menu to display the Subnet Mask (usually 255.255.240.0).
Close by clicking Cancel.
On the LaserJet
Click the green ‘GO’ button until the display reads ‘Offline’
Click ‘MENU’ 7 times or until ‘EIO 2 JETDIRECT MENU’ shows
Press ‘ITEM’ button until ‘CFG NETWORK=NO *’ is displayed
Press ‘VALUE’ button until value reads ‘YES’
Press ‘SELECT’
Press ‘ITEM’ button until ‘CFG TCP/IP=NO*’ is displayed
Press ‘VALUE’ button until value reads ‘YES’
Press ‘SELECT’
Press ‘ITEM’ button until ‘BOOTP=NO’ is displayed (or press ‘VALUE’ button until value reads ‘NO’ and then press ‘SELECT’)
Press ‘ITEM’ button until
‘IP BYTE 1=XXX’ is displayed and where I have put ‘XXX’ using the ‘VALUE’ button enter the first number of the ‘IP’ address displayed in ‘Airport Utility’ (usually 10).
Repeat this procedure for ‘BYTE 2, 3 AND 4’ by using entering a value each time using the ‘VALUE’ button and then pressing ‘SELECT’ before finally moving onto the next ‘IP BYTE’ value using the ‘ITEM’ button.
After all of the ‘IP’ values have been entered pressing the ‘ITEM’ button will display ‘SM BYTE 1=XXX’ – this is the ‘Subnet Mask’ value. Follow the same process as for the ‘IP’ address and enter the values given in the ‘Ethernet’ pane in ‘Network’ under ‘System Preferences’.
After entering the final ‘Subnet Mask (SM)’ value (BYTE 4) press ‘SELECT’ and finally press the green ‘GO’ button.
Open System Preferences and click on "Print & Scan".
Click on the ‘+’ tab on the left of the ‘Printers’ Pane.
Click on the ‘IP’ tab.
From the drop down 'Protocol' menu select 'Line Printer Daemon'.
In the Address field enter the ‘IP’ values that you entered in the printer except change the last digit (usually 1) to 100 (usually 10.0.1.100). (The base station can manage more than 100 IP values and this ensures the first 99 other assigned IPs will not conflict.)
In the 'Print Using' menu choose a Driver/Model (if an appropriate one is not set automatically).
Click ‘Add’.
Close the 'Print & Scan' window.
The Printer name will appear as the IP address you assigned in the 'Printer' pull down menu in the Print window of your applications. Select it to print to that printer.

Bridge an AirPort Express from an Extreme connected to a Motorola DOCSIS 3 cable/modem/gateway via an ethernet cable? Can I connect ethernet to the Express to setup/handshake/coordinate, and then unplug the ethernet cable from the Express?

In other words, does the AirPort Extreme NEED to be the device connected to the coaxial cable, or can I connect that cable to the Motorola SBG6580 DOCSIS 3.0 cable modem/wireless gateway? (My Internet provider requires DOCSIS 3.0 for speeds above 12 megabits/sec.)
Will the Airport Extreme "program" the Express via an ethernet cable, and than the cable can be removed?
The "bridge" or "repeater needs to be quite a distance away from the physically connected cable modem/wireless gateway and the ethernet- connected AirPort Extreme, and we have wall-to-wall carpeting, and the walls and ceilings are off-limits (family politics), so a looooong ethernet cable is out of the question.
Any help is GREATLY appreciated!
Thanx!
P.S. The 802.11 in my house (ground floor, about fifty feet away from the modem; in the living room about 35ft away *****! And Motorola touts this wireless gateway as having amazing coverage (360, I think they call it),but in fairness, this house is old and has a 5 hanset cordless landline and a microwave and a fan, etc., etc., etc......

See if find a solution in one of these discussions:
Best bets to extend/boost signals from Airport and AP Extreme
How to extend and Extreme network using Express

Connecting Extreme and Express via ethernet to both transmit

Hi,
I have a brand new Airport Extreme and Express set up in my house. At the moment the Express is wirelessly extending the range of the Extreme and also serving Airtunes to my Stereo.
My question is can I connect the Airport Extreme and Express via ethernet so that they both transmit a wi fi signal. Or can the Express only connect to the Extreme wirelessly when acting as a network extender?

I figured it out after I did the post.
I plugged them both in to the Ethernet but instead of having the Express extending the Extremes network, I set them both up with the same Name and Password to act independantly as an Active Roaming network.
Now my laptop just picks the one with the best signal as I roam the house and you don't even notice it change Airport.
My Airtunes is now hard wired as well.
thanks.

Connecting aiport extreme and airport express via ethernet cable ?

Is it possible to connect an airport extreme to an airport express via ethernet cable, I ask because I want to expand the range of my wifi network to the basement of my house, the floors are really thick concrete so I installed some ethernet cable runs, I hope somebody can help me, thank you.

+How do I do it ? Do I connect the modem to the airport extreme and then run the ethernet cable from one of the extreme's ethernet ports to the express ethernet on the basememt and a second cable from another of the extreme's ethernet connectors to the express on the second floor+
Yes, this is exactly correct.
To configure each AirPort Express (AX)
Open AirPort Utility, click Manual Setup
Click the Base Station tab below the icons to name your device, assign a device password and adjust time zone settings. Give each Express a separate name so you can identify then easily.
Click the Wireless tab
Wireless Mode...Create a Wireless Network
Wireless Network Name...Exact same name as your AirPort Extreme network
Radio Mode 802.11n (802.11b/g compatible) if you want to use 2.4 GHz
Channel...Automatic
Wireless Security...Exact same setting as your AirPort Extreme network
Wireless Password....Exact same setting as your AirPort Extreme network
Click the Internet icon
Change the Connection Sharing setting at the bottom to "Off (Bridge Mode)"
Click Update at the lower right and the AirPort Express will restart in 20-30 seconds
I think it is easier to configure each AirPort Express with AirPort Utility by temporarily connecting it to your computer with a short ethernet cable. Once you have saved the configuration, you can move the Express to the location that you need.
Please post back on your progress.

Help connect network printer to AP Express joined to an AP Extreme

I have an AP Extreme network that I have added a AP Express (joined not extended) and thought I could connect my HP LaserJet 2000TN via an ethernet cable to my AP express. But I can not find the printer when I try to print.
Both APs are n. The AP Extreme is connected to a cable modem via ethernet. The printer is in another room and floor level so thought this would be much easier than running an ethernet cable through the floor to the AP Extreme.
I think I need the printer IP address but not sure how to find that, but I kind of think it is more that that.
Any help would be greatly appreciated.
Thanks

Hello mhilera. Welcome to the Apple Discussions!
Is your 802.11n AirPort Express Base Station (AXn) the only router in your network configuration? Do you have the HP printer connected directly to the AXn by USB or wirelessly with the printer's built-in wireless capability?

Can I connect Tower w/o wireless card into my Airport Express via ethernet for internet?

Greetings. I have an airport extreme sending wireless internet signal all over the house. I have a music studio computer Intel Xeon that has no wireless card in a seperate room. Am I able to configure an older Airport Express 802.11g that is connected wirelessly to the Extreme signal to connect to internet signal to my tower via the ethernet connection on the Airport Express?... i.e., connect the ethernet cable from my tower to the ethernet port on the Express to access internet signal? If so do I have to set up the Express for a certain kind of configuration that is different than, say, if I were using the airport express for airplay or a printer?
Thank you for your help. Jeff

Am I able to configure an older Airport Express 802.11g that is connected wirelessly to the Extreme signal
Unfortunately, the older AirPort Express model that you have does not have this type of capabiility.....an "n" version of the AirPort Express would be able to do what you want.
Look for a Model A1264 or Model A1392. The A1392 is the newer version, but the A1264 would do fine.
Here I assume that you have an 802.11"n" version of the AirPort Extreme.

AirPrint via Airport Express or Extreme

Any plans for AirPrint support for printers connected via Airport Express or Extreme ?

Hello. Here is a solution without the need of a main computer...
http://www.amazon.com/Lantronix-xPrintServer-Home-Printing-XPS1002HM-01-S/dp/B00 8KCSPRK/ref=sr_1_1?s=pc&ie=UTF8&qid=1365001962&sr=1-1
I got one my self. It works.

Only one device will connect to wifi via my airport Extreme

The power went off at our house recently. Since then I have been unable to connect more than one device via my airport extreme. I have tried unplugging and resetting both modem and router repeatedly. It would switch between laptops, allowing one to be connected while saying the other had no connection and to reset the router/modem. I have tried reconfiguring the airport express (a couple of times). I have tried resetting the network settings on my iphone5. I have restored the factory settings on my iphone5... On my iphone5 the Airport Utility cannot locate the Airport Extreme. It says no base stations have been found.
My husbands android mobile also cannot connect to wifi (which it previously could).
Help please!

So it seems a night of rest has done everything a world of good! I just turned on the second lap top, it connected to the wifi. Then with bated breath tried the iphone5 and it connected too. So, seems that the resets I did yesterday did do the trick, just things needed to be shut down and restarted again. Yay!

Macbook will not connect to printer via the network

I have my G5 computer connected to my home network airport extreme with an ethernet cable. I have a new Canon MX 860 (which will work over a network) which is also connected to the airport extreme with an ethernet cable (wired lan connection). The G5 and the Canon work well together; printing and scanning etc.
I have a Macbook that will not connect to the Canon via the network. I have checked and rechecked the setup and am stumped. I get various failure notices:
"The "Canon..." printer could not be found in your list of printers" (altho it is listed)
"Unable to get printer status (forbidden)"
"Status: In use, Default" (altho the printer is ready and not in use)
"Operation could not be completed -client-error-not-possible"
Both computers are setup for printer sharing and the printer list allows the Canon to be shared.
The network works well supporting Macbook and several Tivos.
Any help on what I should try next?
Thanks for any suggestions
John

Hello John,
For starters, you don't need printer sharing enabled. Since the MX860 is connected to the extreme via Ethernet, then the MacBook should be able to connect directly to the MX860 via wireless or wired.
For either type of connection, you need to add the printer via More Printers > Canon IJ Network. You should not connect via the Default browser view, as this will only show the shared printer via the G5 (which you should disable). In fact, based on the errors you are getting, it does sound like you have added the printer by selecting the shared offering.
So I would delete the current printer queue and add again, using the More Printers > Canon IJ Network menu. This window should show the MX860 with its MAC address in brackets. When you select it and press Add, the printer will be created with a name something like 'Canon MX860 series (00.00.85.xx.xx.xx)'.
If the printing still fails with the printed added as above, then please reply.
PaHu

Connect to printer via Express via Extreme

Similar Messages

Maybe you are looking for