Connect to Projector

I got the DVI to VGA connector for my MBA and connected it to my Toshiba XD2000.
But I'm not seeing anything on the projector other than the Toshiba logo.
If I go into System Preferences > Displays it shows two desktops. And if I click the Gather Windows button I get a window titled "X2000 Series" It doesn't show if I don't have the cable plugged in.
On the projector if I press the input button it just tells me there is no signal.
Any ideas on how to get the projector to work?

Never mind. I had the cable in the wrong vga port on the projector!

Similar Messages

  • MacBook Air connected to projector won't display dvd in superdrive, but plays on macBook Air screen.

    MacBook Air connected to projector won't display the dvd in the superdrive, but it is playing on the MacBook Air screen.
    When dvd is ejected, MB A screen appears on the big screen through the projector. What do I need to do to get the training dvd showing on the screen?
    Thanks

    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US
    Deselect proxies if selected.
    System Preference > Network > Advanced  > Proxies Tab
    Uncheck “Auto Proxy Discovery”.
    Click OK, Apply.

  • Cannot play the video in powerpoint when connected to projector

    i have linked a video into a powerpoint slide... it played perfectly on the screen. but when connected to projector it cannot be played.
    i am using a macbook pro with Lion OS.
    Thanks!

    I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
    Here what I figured out so far:
    1. It happens when you have PPT open and connect to beamer afterwards
    2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
    3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
    4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
    So in short: Connect to beamer first, then launch PPT
    I know it is only a symptom fix but it worked for me

  • I can not connect to projector using Thunderbolt to VGA adapter

    When booting on Windows 7 using Boot Camp I am not able to connect to projector. I have a Thunderbolt to VGA adapter. It works fine when booting on Mac OS. Do i need to update any drivers or am i using wrong adapter? I have Boot Camp version 4.0.

    If this is you home wifi try resetting the router.  Turn if off at the wall wait a minute and turn it back on.  Are you sure you have the right password?

  • Problem connecting to projectors

    With all versions of Mac OS X that I can remember, it has been a breeze to connect to projectors. Everytime I connected to one, I got a decent image right away. Sometimes I was able to get a higher resolution after that first successful connection, but even the first setting was acceptable.
    Since upgrading to Snow Leopard, results are much more erratic. I connected without problem at a recent conference, but most projectors at my workplace give me difficulties even though I connected to the same projectors without a hiccup before Snow Leopard. Usually the projector says "no signal" and it does not matter if I connect before or after turning the projector on (something I never even worried about before).
    Today I had to use one of our projectors and the only way I could get it to work was to select mirroring (goodbye the nice Keynote's presenter's screen) with a resolution of 1024x768 at 60 or 70 Hz. Disabling mirroring or changing resolutions or chosing higher frequencies resulted in a "Signal not compatible" message. This is really annoying. I don't remember having done anything with my settings that could cause this.
    Anyone else encountered this or has a solution to offer?
    Thanks in advance,
    Denis

    Using Keynote run, Snow Leopard puts slideshow and presenter screen on wrong monitors, so i get the presenter on the projector/external monitor. Works like a dream on Leopard with same file, never had a problem with Keynote before. Cannot find a way to set the screens right, application crashes if I move the edit window to presentation and try to run from there. This must be a bug that needs to be fixed - urgent- I have a presentation to do on April 12, bought a Macbook pro to avoid having to carry along my old Imac24 which never ever caused me a problem.

  • HT2494 how to connect a projector

    how to connect a projector?

    What Mac do you have?
    For most, you are going to need some sort of adaptor. This could be a Mini DisplayPort to DVI or MiniDisplay Port to VGA, depending on what input the projector supports.

  • Connecting with projector

    Hello! I hope someone can help me with the problem..
    I am trying to connect my IMAC G5 with a video projector.
    I have been doing this for years with i book G4, using video adaptor,
    and it has always worked.
    This time, however, when I connect the projector with my IMAC,
    (the 17 inch) the resolution changes to 1024-640, thus the image on the screen
    get "swollen"..
    Even if I try to change the resolution in the system preference panel,
    (Display window), it just doesn't work out; if I change it to 1670 resolution
    as it should be, the image becomes "smaller" with a black frame around it.
    (In this case, the swollen image gets slim as before.)
    I had doubt that the video adaptor is not the right one.
    (According to the guy in the computer shop in Turin, it is Mini-VGA
    and it should work out OK likewise with Imac G5)
    I tried with a computer adaptor, too, that came with Ibook, but it is the same.
    The Mac technical assistance says that there is something wrong with my IMAC and I should take it to the repair.
    Is it really only the solution? or is there something else that I can try?
    Thank you grazie..
    minobu

    Hi, did you get this solved. We also you ProPresenter. I am not sure why you mirrored the screen to get a DVD to play? PP supports DVD playback (unless your using an older version that doesnt have this feature??). Or you can drag the DVD window to the projector display.
    Did you deselect mirror image? because you wont have any arrangement options available, you wouldn’t need them.

  • ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector

    Hi,
    I have 2 identical ThinkPad W530 laptops model 244723G
    Both are set to discrete graphics from BIOS because with optimus driver my projector will not work at all.
    But how i have other issue that causes BlueScreen when connection laptop to projector.
    I have installed latest driver from Lenovo download site -> still BSOB when connecting to projector.
    When i install driver from Nvidia site it fixes BSOD issue with discrete graphics and external projector.
    Can same one else confirm that there is a error on Lenovo optiomus driver when using discrete graphics?
    Solved!
    Go to Solution.

    Would you mind posting the links to those drivers, or copying their exact name for us to search on the appropriate site(s)?
    I use a w520 (quad core/nVidia 1000 discrete graphics board) with a projector and anything that makes that smoother I have to consider. There have been posts about how to re-create the usual ThinkPad use of the F7 key for choosing projector view mode but I admit I have never been able to take the time (and risk of failure) to try the swap of internal files to make it happen. (Starting a project like that always makes me feel I have to have time to do the project and if it goes wrong re-install the OS and all updates -- all before the next time the laptop is needed for anything important. That condition is almost never possible.)
    Yeah, I know, I'm chicken! <grin>
    jonathan7007
    4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

  • ThinkPad W530 with Windows 8 x64 Pro BSOD when connecting to projector

    Nine, that only covers Widows 7. Many people in this thread have reported the problem using Windows 8. Has that been addressed by Lenovo yet? Stability problems like this should NEVER be allowed to go so long without a resolution.
    Edit Note : This thread was created base from the previous thread "ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector. As we currently Cx reporting facing the same issue on Win8 I have seperated this thread in order not toconfuse other customer. For cutomers facing this issue please continue posting in this thread.

    Hi shan_mcarthur,
    Thanks for posting. I read through this thread again and noticed that most of customers here do indeed have Windows 7 installed as what the title represented unless I'm mistaken or may have missed out are you or anyone else here facing the same issue on Windows 8. If that is the case I'll be more than happy to bring this up with the teams but it will have to be a new thread though as I'd like to keep the resolution separate based on the OS use just to not confuse other customer .
    For those facing the same issue above on Win8, please do let me know so we can start a discussion around this.
    Do let me know.
    Regards

  • Can't connect external projector to MacBook Pro running Windows7. Any suggestions?

    Can't connect external projector to MacBook Pro running Windows7. Any suggestions?

    Did you try a cable? The point is you did not provide any information about: what projector, how you are trying to connect, what happens when you try, error messages if any, does an external monitor work, what computer you have, what OS, etc.

  • X220 Trackpad curser movement with Ethernet plugged in and with VGA connected to projector

    Thre are many issues discussed about trackpad problem. My problem comes in the trackpad when X220 is connected to Ethernet port. The curser is not stable and it jumps aout 1/2 cm right and left withlout any figer movement, It vibrates on its own when only finger  is placed on the touchpad. This does not happen when Ethernet port is diconnected even with 90w adapter or 65w adapter plugged in. It comes with Ethernet only. 
    The same preoblem comes again when VGA port is connected to Projector. In my case problm has no affect with any power adapter.(90 or 65 w) plugged in.
    This is so problametc that simple tasks of selection is delayed or wrong selection is made.
    Need Help/Solution anyone.
    Thanks, 
    Installed all latest drivers availabe end March 1012 along with trackpad driver (15.3.39.1) 
    Model ThinkPad X220 (4286-CTO)
    Core i7 2.8 Ghz
    8 GB RAM 
    160 GB Intel SSD
    Finger Print Reader
    HD Camera, 720p
    Intel Centreno Advance N 6205 (2x2 Antenna) WiFi
    IPS Display 
     ~
    Haider 

    Hello Haider1223 and welcome to Lenovo community,
    You have already updated all the system drivers, usually updated driver version of UltraNav resolve the issue.
    Kindly update the BIOS and check if the issue gets resolved.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj15us.exe
    If the issue continues then you need to reinstall the Operating System.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • W530 blue sreen when connecting to projector on battery

    Experiencing BSOD when I connect to Projector using VGA port and laptop is on battery. I am running latest BIOS, video drivers as per Lenovo System update. Laptop has Nvidia K1000M and integrated HD4000 and under optimus configuration (in BIOS). In NVIDIA Control panel --> 3D Settings --> Preferred graphics processor is set to Auto-select.
    070813-19047-01.dmp    7/8/2013 11:01:53 AM    SYSTEM_SERVICE_EXCEPTION    0x0000003b    00000000`c0000005    fffff880`07183762    fffff880`0b71d160    00000000`00000000    nvlddmkm.sys    nvlddmkm.sys+91b762    NVIDIA Windows Kernel Mode Driver, Version 311.00    NVIDIA Windows Kernel Mode Driver, Version 311.00    NVIDIA Corporation    9.18.13.1100    x64    ntoskrnl.exe+75c00                    C:\Windows\Minidump\070813-19047-01.dmp    8    15    7601    302,968    7/8/2013 11:03:06 AM    
    This is very frustrating, has happened both times when I tried to connect to projector and reboots after which connects to projector without BSOD.

    Yes I am having this problem as well.
    When connecting my W530 to a projector using the VGA-out port, I get a bluescreen regardless of whether or not I am plugged in or not.
    HDMI-out works fine. I have yet to try to find an adapter for HDMI to VGA.
    Using Windows 8 and NVidia 320.00 WHQL Quadro drivers.
    The relevant difference between his and my W530 is that I use a K2000M.

  • Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

  • Can I show a higher resolution on my laptop screen than on a connected (VGA) projector?

    Can I show a higher resolution on my laptop screen than on a connected (VGA) projector?
    The projector is only 800 by 600 which screws up my desktop each time I project.
    Additionally - if I use a remote desktop client for windows, the change in resolution makes the projection in windows unreadble.
    Anything I can do?
    Many thanks - Mike

    Will not  work, most likely for BootCamp.  Windows drivers for hunderbolt will only create digital (DVI), not analog (VGA).
    Run Windows in Parallels/other-VM-software where OSX runs the Thunderbolt port, or by a USB-VGA adapter.

  • Updated to iOS 8 and can't connect to projector

    I just updated my ipad to iOS 8.2 and can no longer connect to a projector. I am getting this error message. But the settings page indicates my OS updated successfully. How do I resolve this?

    I can understand if you only read the friendly URL, you can imagine you have to jailbreak your device, but if you spend 1 minute reading the article, you'll see the steps to downgrade to 8.1.3.
    Head over to this page and download iOS 8.1.3 IPSW for your iOS device. Ensure that you download the correct IPSW firmware according to the model number of your device. Installing the incorrect firmware could damage the iOS device. The download size of these files ranges from 1.5GB to 2GB. Therefore, downloading the firmware will take some time
    Once you have the correct iOS firmware version downloaded, plug your iOS device to the computer using USB cable
    Launch iTunes                            
    Navigate to the device's summary page and hold the Option/Alt on the keyboard. Or, Shift if you are using Windows
    While holding the key combination mentioned above, click Restore in iTunes
    Browse to the location where you have saved the IPSW file and open it. Now iTunes will begin restoring your iPhone/iPad and install iOS 8.1.3
    I did it and it works fine again !!

  • PB no longer recognizes VGA connection to projector

    I use my PowerBook with two different external displays. It works fine with the DVI connection to an external desktop monitor. It used to also work fine connecting to a classroom A/V system with a projector (using the DVI-VGA adaptor), but it has mostly (tho not entirely) quit being able to detect the classroom system. When I click on "Detect Displays," nothing changes, or my PB screen changes to a lower resolution as if it is the external monitor. Mirroring doesn't work either. After restarting it still didn't even work. It worked fine for three weeks, now it just doesn't seem to see the A/V projector system. Any ideas?

    I have a hunch it may be the DVI-VGA adaptor (and I don't have another one I can test). Because the last time I was successful using the CPX-885/PowerWerks system, I got connected but had to tighten the screws of the adaptor a lot in order to keep the picture bright enough and not dimmed purple. (Tightening the screws in the other classrooms has not helped.)
    Or I should upgrade to 10.4.

Maybe you are looking for

  • Full Screen issue in v 12.0.0.77

    I have an online class that won't allow me to use full screen mode.  When I click on the icon to go to full screen, it tells me:  "Full screen mode is available in Flash Player 9.0.28.0 or later only.  Your current version is 12.0.0.77."   Any sugges

  • Parse XML in a java stored proc

    I am trying to parse an xml document in a java stored procedure. Just following my nose, I have developed a stored proc that works fine in development (outside the database using JRE 1.4.1) using the Xerces 2.5 parser. But, after having transferred t

  • Variable for 'Solution' text status in the smartform

    Hi, everybody. I would like put to smartform solution resolving info from 'Solution' text status from incident. Is any variable for this status in smartform? regards, Yessen

  • My appleworks data base is no longer supported. what can I use to open it

    My appleworks data base is no longer supported. What can I use to open it

  • HELP FOR SOME MAIL app PROBLEMS IN MAVERICKS!

    As many of you, I was having great difficulty opening Apple's Mail app in Mavericks. The type of problem I was having is this: When trying to open Mail for the first time in Mavericks, I would get the message that the database needed to be upgraded;