Connect to remote 1811. username ... doesn't exist in the config

Hi,
Mistake occurred while configuring 1811 in the remote branch. I' was not in time to add line ?username ?. privilege 15 secret ...? to Cisco config.
I?ve executed ?wr mem? and connection was dropped.
I?ve configured only
enable secret 5 ...
and
ip radius source-interface Vlan1
radius-server dead-criteria time 1 tries 3
radius-server host 10.0.5.35 auth-port 1812 acct-port 1813 key xxx
radius-server host 10.0.4.30 auth-port 1812 acct-port 1813 key xxx
radius-server timeout 3
radius-server deadtime 1
but AAA was not configured yet, just only ?aaa new-model?
How can I login to the remote 1811?
I think it?s impossible and I need a person who can connect to 1811?s console.
But may be some experts can give me advices?

Hi,
This is what I was talking about,
How To Copy Configurations To and From Cisco Devices Using SNMP:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa6.shtml
Regards,
Prem
Please rate the posts so that others can benefit from it.

Similar Messages

  • The Cube with ID = Rate doesn't exist in the collection Error Message

    When doing a Full Optimization in the Rate cube I get a "The Cube with ID = Rate doesn't exist in the collection" error message. What is causing this error and how do I fix it?

    I have seen this error when reporting services was not properly configured. can you connect to http://servername/reports ?
    If not try to fix reporting services first, this solved the problem for me in the past.
    But usually in this case all the aplications are giving this error when modifying. Is this also the case in your appset?
    Does Apshell work when you modify the application there?
    -Joost

  • Business System doesn't exist in the SLD

    Hi,
        Im trying to import XI content into the Integration directory. when i logged into Integration directory I clicked <i>Tools -> Import Configuration Objects</i>.
        Im getting a dialog window saying "Business System <Business system name> doesn't exist in the SLD.
       but when i gave t-code SLDCHECK in the PI system, i could see that business system as maintained in the SLD.
       also i could successfully import the XI content for Integration Repository.
       Any suggestion is highly appreciated
    Thanks
    Sourav

    Hi ,
      we have done a migration from AAIX to HPUX. I have performed some post installation steps as part of this.
       As partof this i have followed the post installation steps for PI usage type. I have changed some com.sap.aii parameters to reflect to the current target systems.
      also *** a part of this i refreshed the CPAcache b giving the follwing URL http://<host>:<Java-Port>/CPACache/refresh?mode=full with login id as PIDIRUSER and password. but its gving something like below...
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://sapdxh:54000/CPACache/refresh?mode=full'. Line...
    CPA cache refresh (mode=full) successfully executed in 62009 milliseconds.
    ^
      so is this causing the problem or are there any connection parameters in XI profile to be looked at more spsecifically ??
      please suggest as im not able to find out this error and its on high priority to solve.
    Thanks
      Sourav

  • When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

    When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • Excise invoice doesn't exist in the supplying plant. Message no. 4F281

    Hi Gurus,
    I am doing STO from Excisable depot to Excisable depot as
    1. Create PO at Receiving Depot
    2. Create Delivery through VL10B
    3. Issuing Material through VL02N
    4. Create Excise Invoice through J1IJ
    5. Do Goods Receipt at receiving depot.----here I am unable to capture the invoice
    I am getting error as" Excise invoice doesn't exist in the supplying plant. Message no. 4F281"
    When i try to capture J1ig with supplying plant excise number , the excise value is not flowing and it is showing "0" duty values.
    Any  plant level setting is missing,
    Searched in the forum but not got any solution..
    Please let me know how to solve this issue.
    Thanks,
    Muru..

    Hi,
       Sorry, I misunderstood it as plant to depot STO. Please ignore my previous comment.
       Please ensure that the excise invoice is posted in the supplying plant. Refer the similar thread: STO from Excisable Depot to Excisable Depot
    Regards,
    AKPT

  • The Dimension with ID ... doesn't exist in the collection

    BPC 7.5 SP3, MS SQL 2005
    I am processing an applicaiton using the Admin console.  Choosing "Modify Application", checking the "Process Application" checkbox and clicking "Modify Application" to rebuild the app.  The result is successful completion with an error on the details portion of the display under "Modify Fact Table" that lists and exception in the Log.  The log in the management console shows the error
    Microsoft.AnalysisServices.ItemNotFoundException: The "Dimension" with "ID" = PROFITCENTER doesn't exist in the collection.
    The ProfitCenter dimension is one of the application's dimensions.
    I can process the ProfitCenter dimension and process this application as part of the dimension processing and it is successful.
    I can optimize this application and it is successful.
    The application appears to be working properly.
    I can open the cube in SQL Server Analysis Services and I can see the ProfitCenter dimension and browse its members.  I can open the application cube and browse it.
    I checked the profitcenter dimension member table and compared it to the fact tables and all the facts are base level members that are not calculated members.
    Has anyone seen this error?  Is this just a spurious message I can ignore or is there something really wrong?

    We were able to solve this issue today.  We turned off Insight and reprocessed the application.  The error did not appear.  I hope this works for you too.

  • [svn:bz-trunk] 21277: Added ds-console source to package-oem and removed copy command for datavisualization .swc which doesn't exist in the specified location.

    Revision: 21277
    Revision: 21277
    Author:   [email protected]
    Date:     2011-05-18 11:35:28 -0700 (Wed, 18 May 2011)
    Log Message:
    Added ds-console source to package-oem and removed copy command for datavisualization.swc which doesn't exist in the specified location. I do not find it in the most recent package-oem.zip neither
    Modified Paths:
        blazeds/trunk/build.xml

    Gusar wrote:No, it's not. I have actually seen cases where software rendering gave a higher glxgears score than hardware rendering (and no, it wasn't about vsync). Of course, with *actual* apps on the same machine, software rendering sucked compared to hardware rendering.
    Please do not jump to conclusions and make assumptions here like 'when will people finally get it??'.  I never said it was a benchmark.  I have also seen many examples of where it's results do not go with conventional performance.  I have a Radeon 9000 that goes faster on glxgears than a Geforce FX 5600 running Nouveau.  Which is the faster card?  The FX by miles.  It is not a benchmark as it can not be compared between configurations.  What I know is that on this individual system, from prior experience over many years when 3D acceleration is working glxgears gets between 300 and 400 fps.  When it is not working it gets less than 10.  That is a fact but does not mean it is benchmarkable.  Yes, a Quake 3 timedemo (I have these numbers too and they very much correlate to glxgears performance for this system given just how slow it is) would be a benchmark but when it runs less than 0.1fps and even the 2D rendering means that navigating the menu is impossible, there just isn't the time to find out.  Hence if playing around with drivers on this system I would use glxgears to check that 3D acceleration is working but not to benchmark.  Glxinfo does not give you all this evidence.
    But to clarify, I wouldn't use glxgears as a benchmark, benchmarking is different and I do a lot of that too.

  • LOGERROR: **theProduct := index.sucatalog doesn't exist in the catalog!

    I keep getting this error in my Software Update Server log:
    LOGERROR: **theProduct := index.sucatalog doesn't exist in the catalog!
    This is after a clean install of Tiger Server.
    Mirrored updates show 91.
    I'll upgrade the server to 10.4.6 and hope that that helps.
    How do I put index.sucatalog in the catalog?
    Thanks,
    James.

    Gave up.

  • The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.

    Hi,
    When I am importing csv file system is showing me the following error:
    [Admin-ProcessPartition]The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.
    I checked my OLAP database. Partition with id = FAC2CRDN exists.
    Please help me to come our from this issue and Thanks.
    Regards,
    Stanislav

    I would suggest you the following steps in order to see if your problem is fixed or if you still have some errors:
    1) full optimize your application
    2) try to full process the OLAP database directly from the Analysis Services management console.
    Regards,
    Simmaco

  • I am unable to restore my subscription. I receive the following error message when I enter the password: " Apple ID doesn't exists or the password is wrong".

    I am unable to restore my subscription. I receive the following error message when I enter the password: " Apple ID doesn't exists or the password is wrong".

    Please refer to Can't authorize with a previously used Adobe ID

  • IPhone connects to wifi but MacBook doesn't pick up the signal.

    iPhone connects to wifi but MacBook doesn't pick up the signal

    Okay, this morning it happened again. I unplugged my iphone, surfed some pages fine. Five minutes later I woke it up again, tried to go to the app store. Nothing.
    Tried to surf some newspaper sites. Nothing. So I used an IP address rather than the www.blablabla.com address and it works.
    Confirmed. Some sort of cirumstances let the DNS service crash. Only IP addresses work. After a reboot (that's the only chance) it works again.
    Network reset, restore iOS, all other typical help steps, never cured it.
    That's a bug.
    Lets put it on http://www.apple.com/feedback/

  • HT1688 Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in.  We have tried multiple usb ports and nothing.

    Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in.  We have tried multiple usb ports and nothing.

    Hello csmithhisler,
    Congratulations on your new iPhone 5c!  I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Connecting to remote server failed - WinRM client cannot complete the operation within the time specified

    Exchange 2010 SP2 Active DAG Node.  Cannot cannot to Exchange Admin Console with the following errors and these errors change from time to time ... and some times it works ...
    attempt to connect to http://DAGNODE.domain.com/powershell using "kerberos" authentication failed: connecting to remote server failed with the following message: The WinRM Client cannot complete the operation
    within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for windows remote management service is enabled.
    thanks,

    Hi,Philip,
    Are you running the DAG on Windows server 2008 R2?If so check the following KB to see if they apply to your issue
    http://support.microsoft.com/kb/976839
    http://support.microsoft.com/kb/2294243
    And you can check if the solutions in these old threads with similar error message do the trick for you.
    http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/54af902c-d718-4656-8a25-7c150e4b0e81/
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/baa1af25-001a-432d-86a0-25c05655e63c/
    Regards,
    Sharon
    Sharon Shen
    TechNet Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • I have a strange object on a webpage that doesn't exist in the design

    I don't know exactly how to describe the problem.
    .. but here it goes:
    First, I'm just an enthusiastic novice. I've done fairly well figuring Studio 8 on my own using a couple of "how-to" 's ... so please excuse the inexact language.
    I have a webpage that consists of a flashpaper document and 3 informational text objects to its right. When I look at the page in dreamweavr that's what i see .. when I upload to the web and then look at my webpage .. there is a large white box occupying the position where the flashpaper doc should be and the doc is instead crammed under the text oblects to the right ...
    I've redone this page numerous times and the problem isn't fixed. I tried to look at the html to see if there was something obvious I could pull out but nothing stood out and the tinkering I did was useless. so, i left it alone and untouched.
    When I look at it in Contribute .. the object is there until I hit "Eit Page"  then the doc moves to the proper position and just to the left of it ot the bttom corner is a mysterious tiny yellow icon that looks like a printer ... its too tiny to be sure and I can't figure out how to zoom into the page for a better look. Is this the culprit? ( Its not selectable or I would just delete it and see what happens.)
    Does anyone have any ideas???
    if it would help to check out the page :  http://www.tejanaworks.com/J%20Zapata%20resume.html
    Thanks a bunch!!!
    ana

    A blessing in disguise. Adobe removed Flash Paper and Flash buttons from DW several versions back because they aren't web friendly.  
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

Maybe you are looking for

  • Need help with LikeFilter for querying the keyset instead of value

    Hi, I'm looking for help with the LikeFilter. I need to query the cache to get all entries with key starting with a particular string. I could see samples using LikeFilter for querying the values in the cache but not the keyset. Can someone help? E.g

  • How to Convert .ps to .pdf?

    Is it possible to convert the .ps file to .pdf file through ghost script. How? Is it possible to convert .ps to pdf through anyother third party tool. Kindly advice me.

  • ICal subscriptions entries not on iOS

    Hi, I had several subscription calendars on Mac which was entered in iCloud and so synced to my iPhone. No the subscription link changed. I deleted the calenders, added new ones (and changed the name of the calenders). Problem: I see the calender sub

  • How do I change fonts

    I'd like to change the font on my emails. Does anyone know how to do this?

  • Can SCC-RTD01 be used with Cernox RTD's, silicon diode temperature sensors?

    Hi,    Can the SCC-RTD01 be used with negative temperature coefficient RTD's such as the Cernox RTD's.  Can it be used with silicon diode temperature sensors?    I was planning on using the SCC-RTD01 with platinum resistance wires, but want a screw m