Connect to remote database is incorrect

There is a database server with two running Oracle instances. Their SIDs are "SID1" and "SID2".
I'm trying to establish a remote connect from an another host.
tnsnames.ora:
ArchiveDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 172.16.82.11)(PORT = 1521))
(CONNECT_DATA =
(SID = SID2)
But when I try to connect to the remote database using: sqlplus user/password@ArchiveDB, it says that login/password are incorrect, but if I use credentials for the instance (database, to be more precisely) "SID1", it works. That's why I decided that it tries to connect to SID1, not SID2. Why? Any Ideas?
Thanks in advance.

Hi,
As per your scenario, you specified either the problem must persist in your tnsnames.ora or listener point to the ORACLE Home..!!
it says that login/password are incorrect
Second thing is that try to check whether required is used to connect the DB, I mean correct user is utilized for login
Coming to remote Login, check whether oracle password file is maintained and REMOTE_LOGIN_ PASSWORDFILE is exclusive is setted properly
- Pavan Kumar N
Edited by: Pavan Kumar on Oct 8, 2008 4:54 PM

Similar Messages

Connection to remote database failed

I have configured the cman.ora file and changed the connection
string for the java applet, but I encountered the error
"The NT Adapter could not establish the connection" when I tried
to connect to remote database from JDev2.0(beta).
Any ideas of what are the possible causes for this?
At the cman.ora file, the setting are:
cman = (ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=<web_host_ip>)(PORT=1610))
(ADDRESS=(PROTOCOL=tcp)(HOST=<db_host_ip>)(PORT=1521))
cman_profile = (parameter_list=
(MAXIMUM_RELAYS=1024)
(LOG_LEVEL=1)
(TRACING=yes)
(RELAY_STATISTICS=yes)
(SHOW_TNS_INFO=yes)
(USE_ASYNC_CALL=yes)
(AUTHENTICATION_LEVEL=0)
At the java applet the connection statement are:
DriverManager.registerDriver (new
oracle.jdbc.driver.OracleDriver());
Connection conn =
DriverManager.getConnection ("jdbc:oracle:thin:" +
"@(description=(address_list=" +
"(address=(protocol=tcp)(host=<web_host_ip>)(port=1610))" +
"(address=(protocol=tcp)(host=<db_host_ip>)(port=1521)))" +
"(source_route=yes)" +
"(connect_data=(sid=<orasid>)))", "<user>", "<id>");
The error at the dos prompt running from JDev2 are:
java.sql.SQLException: The NT Adapter could not establish the
connection
at oracle.jdbc.dbaccess.DBError.check_error(Compiled
Code)
at oracle.jdbc.driver.OracleConnection.<init>(Compiled
Code)
at oracle.jdbc.driver.OracleDriver.connect(Compiled Code)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(Compiled Code)
at test.Applet1.jbInit(Compiled Code)
at test.Applet1.init(Compiled Code)
at sun.applet.AppletPanel.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
Thanks,
Eye Gee
null

I am able to connect to the remote database using SQL*plus but
does it means it is using CMAN connection?
How do I test the CMAN connection from SQL*plus? Any example for
me to follow?
Thanks,
Eye Gee
mark tomlinson (guest) wrote:
: Have you tried using the CMAN connection from something like
: SQL*plus to verify that it is configured correctly? Everything
: looks correct, so it might be hiding an actual NET error
: underneath.
null

I want to connect to remote databases which can be specified by URL

Hi,
i'm tinu
I want to connect to remote databases which can be specified by URL
the database is ORACLE 9i
pls help me, how to connect to it
i have the ip address,port address,sid,username and password of the database
is there any difference in the actual code of database connection
plss help

Hi,
There is a particular example with MS SQL 2000 in thread http://forum.java.sun.com/thread.jspa?threadID=608314
In the given example you just need to change the database URL and the JDBC driver. Just examine the code a little bit.
Also you may wish to visit the SUN's JDBC tutorial on http://java.sun.com/docs/books/tutorial/jdbc/
Ferad Zyulkyarov

Connecting to remote database (idle) with Password File Authentication

Hi all,
I was wondering if it's possible to connect to a remote database that is shut down (idle instance) as sys user with sysdba privileges? In the book Oracle - All in One on page 210 in the section - Operating System and Password File Authentication it says:
Connection with operating system or password file authentication is always possible, no matter what state the instance and database are in, and is necessary to issue STARTUP or SHUTDOWN commands.
Above indicates that it's possible but I'm unable to do so.
I managed to connect to remote database that was in nomount mode (see below for details).
When I first tried to connect to a remote database (idle instance) using password file authentication it was giving following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:59:28 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
After starting the database to nomount mode I was getting following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:48:36 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12528: TNS:listener: all appropriate instances are blocking new connections
Enter user-name:
So I added the clause (UR=A) to my listener.ora file and after that it work and I was able to connect:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 14:04:49 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
I have all necessairly entries in tnsnames.ora on my local host.
Also I have no problems when connecting as sys user with sysdba when the DB is open but can't get it work on an idle instance.
I know that I can use operating system authentication but want to know if there is a mistake in the book or I'm doing something wrong.
Regards,
Dawid
Edited by: 978239 on 2012-12-21 06:24

978239 wrote:
Hi all,
I was wondering if it's possible to connect to a remote database that is shut down (idle instance) as sys user with sysdba privileges? In the book Oracle - All in One on page 210 in the section - Operating System and Password File Authentication it says:
Connection with operating system or password file authentication is always possible, no matter what state the instance and database are in, and is necessary to issue STARTUP or SHUTDOWN commands.
Above indicates that it's possible but I'm unable to do so.
I managed to connect to remote database that was in nomount mode (see below for details).
When I first tried to connect to a remote database (idle instance) using password file authentication it was giving following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:59:28 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptorSince the database is down, the only way the listener is going to know of it is if you create a static registration by adding an entry for the db in the SID_LIST section of listener.ora
>
Enter user-name:
After starting the database to nomount mode I was getting following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:48:36 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12528: TNS:listener: all appropriate instances are blocking new connections
Enter user-name:
So I added the clause (UR=A) to my listener.ora file and after that it work and I was able to connect:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 14:04:49 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
I have all necessairly entries in tnsnames.ora on my local host.
Also I have no problems when connecting as sys user with sysdba when the DB is open but can't get it work on an idle instance.
I know that I can use operating system authentication but want to know if there is a mistake in the book or I'm doing something wrong.
Regards,
Dawid
Edited by: 978239 on 2012-12-21 06:24

Failed to connect to remote database DMWEB_SITE1. Error is ORA-12533

hello Gurus,
I don't get what's hapenning with my Standby database
I've follwoed the procedure as usual to recreate my standby as usually (works fine) exception this time
I've created a separat listener so tha I've configured a local_listener
in Site 1 Ok
Site 2 I get error message below in my dataguard trace File ...
NSV0: Failed to connect to remote database DMWEB_SITE1. Error is ORA-12533
DG 2010-01-08-15:56:32 0 2 0 NSV0: Failed to send message to site DMWEB_SITE1. Error code is ORA-12533.
DG 2010-01-08-15:56:32 0 2 707758231 DMON: DMWEB_SITE2 unable to contact primary for DRC version check
When I try to enable the dataguatrd configuration it succed but the Site2 remains Disable.
My Local Listener :
LISTENER_DMWEB.world =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=srvldbp03.int.imd.ch)(PORT=1523))
(ADDRESS=(PROTOCOL=TCP)(HOST=srvldbp13.int.imd.ch)(PORT=1523))
Txs for any Help
Rgds
Carlos

yes i've check Both Adress
The tnsnames in Both Sites is :
DMWEB_SITE1.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvldbp03.int.imd.ch)(PORT = 1523))
(CONNECT_DATA = (SERVICE_NAME = DMWEB_SIET1)(ORACLE_HOME = /u01/app/oracle/product/10.2)(SERVER = DEDICATED))
DMWEB_SITE2.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvldbp13.int.imd.ch)(PORT = 1523))
(CONNECT_DATA = (SERVICE_NAME = DMWEB_SITE2)(ORACLE_HOME = /u01/app/oracle/product/10.2)(SERVER = DEDICATED))
*********** FROM SITE 1
[oracle@srvldbp03 admin]$ tnsping DMWEB_SITE1.world
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = srvldbp03.int.imd.ch)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = DMWEB_SIET1)(ORACLE_HOME = /u01/app/oracle/product/10.2)(SERVER = DEDICATED)))
OK (0 msec)
[oracle@srvldbp03 admin]$ tnsping DMWEB_SITE2.world
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = srvldbp13.int.imd.ch)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = DMWEB_SITE2)(ORACLE_HOME = /u01/app/oracle/product/10.2)(SERVER = DEDICATED)))
OK (10 msec)
[oracle@srvldbp03 admin]$
******** FROM SITE 2
[oracle@srvldbp13 bdump]$ tnsping DMWEB_SITE1
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = srvldbp03.int.imd.ch)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = DMWEB_SITE1)(ORACLE_HOME = /u01/app/oracle/product/10.2)(SERVER = DEDICATED)))
OK (0 msec)
[oracle@srvldbp13 bdump]$ tnsping DMWEB_SITE2
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = srvldbp13.int.imd.ch)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = DMWEB_SITE2)(ORACLE_HOME = /u01/app/oracle/product/10.2)(SERVER = DEDICATED)))
OK (0 msec)
[oracle@srvldbp13 bdump]$
In Both Database the Parameter LOCAL_LISTENER=LISTENER_DMWEB
When I check Dataguard Configuration
SITE 1 is OK
SITE 2 is disabled and the trace shows this Ora:12533 Error

NSV0: Failed to connect to remote database orcl. Error is ORA-12514

sGetting error on data guard broker configuration. redologs shiping properly, withot any problems.
Database: 11gR2 , Linux 64-bit
[root@redhat ~]# su - oracle
[oracle@redhat ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Fri Jun 18 17:39:07 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> connect /as sysdba
Connected.
SQL> connect sys/oracle@primarydb as sysdba
Connected.
SQL> connect sys/oracle@physicaldb as sysdba
Connected.
SQL>
*/etc/hosts file contents on all nodes*
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1     localhost.localdomain     localhost
192.168.1.232     redhat          redhat
192.168.1.234 rac1          rac1
primary database (drcorcl.log)
2010-06-18 17:41:39.972 02010001 1362743835 DMON: CTL_GET_STATUS forwarded to site physicaldb for processing
2010-06-18 17:41:41.044 NSV1: Site physicaldb returned ORA-16664.
2010-06-18 17:41:41.045 02010001 1362743821 DMON: Database physicaldb returned ORA-16664
2010-06-18 17:41:41.045 02010001 1362743821 for opcode = CTL_GET_STATUS, phase = NULL, req_id = 1.1.1362743821
2010-06-18 17:41:41.045 02010001 1362743821 DMON: CTL_GET_STATUS operation completed
2010-06-18 17:41:41.050 01000000 1362743836 DMON: MON_PROPERTY operation completed
2010-06-18 17:41:41.054 01010001 1362743837 DMON: MON_PROPERTY operation completed
2010-06-18 17:41:41.058 01010001 1362743838 DMON: MON_PROPERTY operation completed
2010-06-18 17:41:41.062 01010001 1362743839 DMON: CTL_GET_STATUS operation completed
2010-06-18 17:41:56.045 NSV1: Site physicaldb returned ORA-16664.
2010-06-18 17:41:56.045 02010001 1362743835 DMON: Database physicaldb returned ORA-16664
2010-06-18 17:41:56.045 02010001 1362743835 for opcode = CTL_GET_STATUS, phase = NULL, req_id = 1.1.1362743835
2010-06-18 17:41:56.046 02010001 1362743835 DMON: CTL_GET_STATUS operation completed
physical standby database (drcorcl.log)
2010-06-17 00:41:30.410 drcx: could not find task req_id=1.1.1362743821 for PROBE.
2010-06-17 00:41:45.411 drcx: could not find task req_id=1.1.1362743835 for PROBE.
2010-06-17 00:42:00.546 NSV0: Failed to connect to remote database orcl. Error is ORA-12514
2010-06-17 00:42:00.547 NSV0: Failed to send message to site orcl. Error code is ORA-12514.
2010-06-17 00:42:00.547 DMON: Database orcl returned ORA-12514
2010-06-17 00:42:00.547 for opcode = HEALTH_CHECK, phase = BEGIN, req_id = 1.1.1362743840
2010-06-17 00:42:15.414 drcx: could not find task req_id=1.1.1362743840 for PROBE.
2010-06-17 00:43:15.548 NSV0: Failed to connect to remote database orcl. Error is ORA-12514
2010-06-17 00:43:15.549 NSV0: Failed to send message to site orcl. Error code is ORA-12514.
2010-06-17 00:43:15.549 DMON: Database orcl returned ORA-12514
2010-06-17 00:43:15.549 for opcode = HEALTH_CHECK, phase = BEGIN, req_id = 1.1.1362743841
Standby Lintener file contents
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1)(PORT = 1521))
ADR_BASE_LISTENER = /oradisk/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DNAME = physicaldb)
(ORACLE_HOME = /oradisk/oracle/product/11.2.0/db)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DNAME = physicaldb_DGMGRL)
(ORACLE_HOME = /oradisk/oracle/product/11.2.0/db)
(SID_NAME = ORCL)
Primary database Listener contents
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.232)(PORT = 1521))
ADR_BASE_LISTENER = /oradisk/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DNAME = orcl)
(ORACLE_HOME = /oradisk/oracle/product/11.2.0/db)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DNAME = orcl_DGMGRL)
(ORACLE_HOME = /oradisk/oracle/product/11.2.0/db)
(SID_NAME = orcl)
TNSNAMES.ora on all nodes
PRIMARYDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.232)(PORT = 1521)))
(CONNECT_DATA =(SID = orcl))
LISTENER_PHYSICALDB =(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.234)(PORT = 1521))
PHYSICALDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.234)(PORT = 1521)) )
(CONNECT_DATA =(SID = orcl))
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.232)(PORT = 1521)))
(CONNECT_DATA =(SERVER = DEDICATED)(SID = orcl) )
)

Don't use the old syntax 'SID=...' in tnsnames.ora, use 'SERVICE_NAME=...' . Make sure 'SERVICE_NAME' is exactly the same returned by 'lsnrctl status' on both nodes.
Primary and standby cannot talk to each other currently through the listener:
ORA-16664: unable to receive the result from a database
Cause: During execution of a command, a database in the Data Guard broker
configuration failed to return a result.
Action: Check Data Guard broker logs for the details of the failure. Fix any
possible network problems and try the command again.
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
Action: - Wait a moment and try to connect a second time.
- Check which services are currently known by the listener by executing: lsnrctl services <listener name>
- Check that the SERVICE_NAME parameter in the connect descriptor of the net service name used specifies a service known by the listener.
- If an easy connect naming connect identifier was used, check that the service name specified is a service known by the listener.
- Check for an event in the listener.log file.
Werner

Connect to remote database

hello
i am souvik kundu . i am using tomcat web server that is in india . Through this web server i want to connect oracle data base that is in philipins(remote) .pls tell me the code or procedure how i connect to remote data base ?????????

Dear Souvik,
The physical location of the database is not of big concern while working with the java programs.
U might be aware how to connect to remote database from ur localmachine if u have databaseclient(Oracle client for example) installed in ur system.
U need to have a tnsnames.ora file to resolve the database.
An entry in the tnsnames.ora file will lokk like the following
name=( description = (address = ( host =ipnumber ) ( protocol = tcp ) (port = some port number ))(connect_data = (sid=sidname)))
Here the sidname is very important
If u have this description in the tnsnames file , then u can connect to any oracle machine in the world with the valid userid and password.
al this is another part of the story , but now our concern is to make ur tomcat application capable of conencting to remote database
there are two ways that i suggest u
1) Explicitly make connections to the remote database from withing ur java program as follows
String userId="scott";
String passWord = "tiger";
String url = "jdbc:oracle:thin:@ipnumber:portnumber:sidname";
String driver = "oracle.judbc.OracleDriver";
//This is very important
try{
Class.forName( driver );
Connection con = DriverManager.getConnection ( url,userId,passWord );
}catch(){
Here the difference is that if ur using a local database u need not to give the ip number and portnumber combination
Note:check whether ur network can contact to the destination by running the command at command prompt
> tnsping ipnumber
If tns ping doesnt work then u cant contact the remote database.
2) Use tomcat admin console screen to set up a datasource and give required information as I provided above,
Then u can obtain the connection frm the datasource.
Regards
mahi

Connecting to remote database using Connector/J

I'm new to JDBC so be gentle.
Basically i'm trying to connect to a remote database from my own computer (client to server). As far as I know i'm doing everything correctly. Am I correct in thinking that Connector/J is native to JDK versions 1.2 and up? Which in turn means that I don't have to install any other drivers as long as i have the JDK installed?
public void loadDriver() {
        try {
            Class.forName("com.mysql.jdbc.Driver").newInstance();
        catch (Exception ex) {
            System.out.println("Cannot load driver");
    }Ok, here's my loadDriver() method which isn't working and causes nothing else to work because it doesn't work. I'm getting the information from the mySQL documentation here: http://dev.mysql.com/doc/connector/j/en/cj-registering-with-driver-manager.html
Not sure what's going wrong here, help would be very much appreciated
Regards

Ok i ended up putting the correct .jar file into the correct dir finally. It seems as though some of the instructions in the documentation are incorrect.
Ok i am now able to load the driver but the connection keeps timing out when trying to connect to the database.
At the moment i'm trying the following:
con = DriverManager.getConnection("jdbc:mysql://kezzer.co.uk/db", "username", "password");But it doesn't seem to be working. Obviously i'm not using those exact strings for the database, username and password but that's the format it's currently in. Any ideas?

Connecting to Remote Database using Debian w/Oracle XE

Hello.
I have managed to install Oracle XE on a Debian box.
I am trying to connect to a remote server located on my network.
I am using the following connection string:
# sqlplus <User>/<Password>@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<IP>)(PORT=1521)))(CONNECT_DATA=(SID=<SID>)))'
However, I was given both a SID and a Service_name.
I tried connecting with both.
Is it possible to parametrize both? I checked and the remote server is up, and that is the existing port.
Thanks a lot!

user603592 wrote:
Hello.
I have managed to install Oracle XE on a Debian box.
I am trying to connect to a remote server located on my network.
I am using the following connection string:
# sqlplus <User>/<Password>@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<IP>)(PORT=1521)))(CONNECT_DATA=(SID=<SID>)))'
However, I was given both a SID and a Service_name.
I tried connecting with both.
Is it possible to parametrize both? yes, see below
bcm@bcm-laptop:~$ sqlplus -h
SQL*Plus: Release 11.2.0.1.0 Production
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Use SQL*Plus to execute SQL, PL/SQL and SQL*Plus statements.
Usage 1: sqlplus -H | -V
    -H             Displays the SQL*Plus version and the
             usage help.
    -V             Displays the SQL*Plus version.
Usage 2: sqlplus [ [<option>] [{logon | /nolog}] [<start>] ]
<option> is: [-C <version>] [-L] [-M "<options>"] [-R <level>] [-S]
    -C <version>   Sets the compatibility of affected commands to the
             version specified by <version>. The version has
             the form "x.y[.z]".     For example, -C 10.2.0
    -L             Attempts to log on just once, instead of
             reprompting on error.
    -M "<options>" Sets automatic HTML markup of output. The options
             have the form:
             HTML [ON|OFF] [HEAD text] [BODY text] [TABLE text]
             [ENTMAP {ON|OFF}] [SPOOL {ON|OFF}] [PRE[FORMAT] {ON|OFF}]
    -R <level>        Sets restricted mode to disable SQL*Plus commands
             that interact with the file system.     The level can
             be 1, 2 or 3. The most restrictive is -R 3 which
             disables all user commands interacting with the
             file system.
    -S             Sets silent mode which suppresses the display of
             the SQL*Plus banner, prompts, and echoing of
             commands.
<logon> is: {<username>[/<password>][@<connect_identifier>] | / }
           [AS {SYSDBA | SYSOPER | SYSASM}] [EDITION=value]
    Specifies the database account username, password and connect
    identifier for the database connection. Without a connect
    identifier, SQL*Plus connects to the default database.
    The AS SYSDBA, AS SYSOPER and AS SYSASM options are database
    administration privileges.
    <connect_identifier> can be in the form of Net Service Name
    or Easy Connect.
      @[<net_service_name> | [//]Host[:Port]/<service_name>]
     <net_service_name> is a simple name for a service that resolves
     to a connect descriptor.
     Example: Connect to database using Net Service Name and the
           database net service name is ORCL.
        sqlplus myusername/mypassword@ORCL
     Host specifies the host name or IP address of the database
     server computer.
     Port specifies the listening port on the database server.
     <service_name> specifies the service name of the database you
     want to access.
     Example: Connect to database using Easy Connect and the
           Service name is ORCL.
        sqlplus myusername/mypassword@Host/ORCL
    The /NOLOG option starts SQL*Plus without connecting to a
    database.
    The EDITION specifies the value for Session Edition.
<start> is: @<URL>|<filename>[.<ext>] [<parameter> ...]
    Runs the specified SQL*Plus script from a web server (URL) or the
    local file system (filename.ext) with specified parameters that
    will be assigned to substitution variables in the script.
When SQL*Plus starts, and after CONNECT commands, the site profile
(e.g. $ORACLE_HOME/sqlplus/admin/glogin.sql) and the user profile
(e.g. login.sql in the working directory) are run. The files may
contain SQL*Plus commands.
Refer to the SQL*Plus User's Guide and Reference for more information.
bcm@bcm-laptop:~$

How can i connect to remote database from netbeans

Hi,
I have got MySQL database server installed and running on a different machine. Is there any way to connect and browse database remotely using netbeans 5.5?
I have added connector/driver for that database. i can connect and browse the database with host: "localhost" and port number. But when i specified the ip address of that machine, it gives me error.
Can anyone help please.
cheers.

well, its not working in App server either.
In App server admin console, on that connection pool if i define servername as "localhost", it works fine. If i change it to the remote machine's ip address, then it doesn't work.
Any idea will be appreciated.
cheers.

Oracle 8.0.5 on RH6.0, unable to connect to remote database

Hi Everybody,
I have this problem, i have running oracle 8.0.5 on RH6.0
everything works ok for me. But when i use sqlplus on box where
is my Oracle running and try to connect to another database on
my site (which is running on HPUX) I got resul ORA-01017 invalid
username/password. Tnsping to this machine is ok, so i have this
in my tnsname.ora When i create dabase link (with user which I
try to use to connect remote database) on my local datbase to
this database then link works sucessfully too. select * from
dual@remote_database Ok. What's wrong ??? Remote database is
Oracle 7.3.4.3 on HPUX. Any difference between SQL*Net of
Oracle7 and 8 ???
null

Try putting
disable_oob = ON
in your sqlnet.ora file.
Anwar.
Radek Sedmak (guest) wrote:
: Hi Everybody,
: I have this problem, i have running oracle 8.0.5 on RH6.0
: everything works ok for me. But when i use sqlplus on box where
: is my Oracle running and try to connect to another database on
: my site (which is running on HPUX) I got resul ORA-01017
invalid
: username/password. Tnsping to this machine is ok, so i have
this
: in my tnsname.ora When i create dabase link (with user which I
: try to use to connect remote database) on my local datbase to
: this database then link works sucessfully too. select * from
: dual@remote_database Ok. What's wrong ??? Remote database is
: Oracle 7.3.4.3 on HPUX. Any difference between SQL*Net of
: Oracle7 and 8 ???
null

Process terminated by signal 11 (abap dump) connecting to remote database

Hi
We are currently running 4.7 Enterprise on Oracle 9.2.0.6.0 and frequently connect to another remote (non SAP) oracle database using the following statements:
exec sql.
connect to 'remote'
endexec.
The remote system is set up in SAP using view DBCON.
This works pretty well but we have started to see an increasing number of terminations "Process terminated by signal 11"
I suppose I have two questions
1. Can we modify our abap to catch this exception (this would let us try again or exit gracefully)
2. Does anyone know the cause of this exception or where to look to find the cause
Many thanks for your help.
Simon

Fixed at last - an update to the Oracle client / libaries I think was what cured it in the end. Phew
Thanks

Connecting to remote database without using db links

Referred Thread:
Re: Remote DB connection without DB link
In reference to the thread above, my question goes like this:
Let's say I want to run a query from a database and use data from another database. I have the user, password, SID and port number of the other database but do not want to create a separate connection using sqlplus or connect commands.
Something like this:
SQL> show user
USER is "A"
SQL> select a.col1, b.col2 from tab1 a, tab2@????? where <some condition>;
Can this connection be done on the fly ?? I agree that a DB link will do the trick, but let's say I am not supposed to create objects on the other database.

You need two sets of privs on the remote database to view data in that database schema:
- create session (the schema must allow client connections to create schema sessions)
- select on other schema tables whose contents to view
You need a single priv on the local database, to connect to that remote schema on the other database:
- create database link
You also need the following in order to create the db link:
- the remote schema name and password
- IP address or hostname of the remote db server
- the remote Listener's tcp endpoint port
- the name of the remote database (SID, instance or service name)
If you do not have these privs, you cannot use/access the remote database from the local database session via a database link.
Other alternative methods needs additional privileges and objects on both the remote and local database sides - and are more complex (e.g. using web services, using web-enabled procedures, etc).

Connect to remote database from forms

hi,
I installed 10g developer suite on windows.I have a 10g database running on HPUX server.
I need to connect to this database from forms ( i,e from windows ).
Do i need to install an Oracle client so that forms can talk to a remote database?
I edited C:\Forms_Dev\NETWORK\ADMIN/tnsnames.ora to include the remote database entry. It's not working. So I am thinking maybe I need to install oracle client as a go between.
Thanks

Do i need to install an Oracle client so that forms can talk to a remote database?No, Tnsnames (NET8) is enough.
Write us you tnsnames.ora or try
tnsping <serverdb> from client, and check.

How Forms 6i could connect to remote database 9i

AOA,
Our company has different sites located in different cities. In the main office we have developed many modules using Oracle 9i and Developer 6i and our data is highly confidential.
In all remote sites our modules are running by standalone. Now we want to connect our remote sites with our main Database.
What will be the options available to make highly secured connection between our sites and main office.
In our city different ISPs are available who can provide dedicated IP access, DSL and VPN.
If anybody has any experience please let us know.
Regards
Aimed Bill
System Analyst
Pakistan
Message was edited by:
AB Shah

In the itvimsapp server execute the command
emctl status dbconsole
and see the name server and port, for example:
===================================
[oracle@bddesa oracle]$ emctl status dbconsole
TZ set to America/Guayaquil
Oracle Enterprise Manager 10g Database Control Release 10.1.0.3.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://bddesa:5500/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
===================================
If the server is running you can connect with the sentence
http://bddesa:5500/em or http://192.168.1.186:5500/em
I hope this help
Regards,
Wilson

Connect to remote database is incorrect

Similar Messages

Maybe you are looking for