Connect to SAP MaxDB
Hey,
I've installed SAP MaxDB Version 7.7.07.33 64 bit, and I'm having some troubles to connect to the Database.
1- The first problem : When I open DBM Command Line Interface (dbmcli) he ask for a server name which I don't have.
2- The second one : When I use SQL Command Line Interface (sqlcli) and I try
dbmcli -d MYDATABASE-u DBADMIN,mypassword -uSQL DBM,hispassword
I get always this : * -10709: Connection failed (RTE:Database name is missing)
I checked my database name, who is : MYDATABASE
I don't know where the problem comes.
Do you have any ideas ?
Thanks.
I'm just trying to get the authorised user by typing :
C:\Program Files\sdb\programs\pgm>dbmcli -d MYDATABASE -u DBADMIN,mypassword user_getall
EXCEPTION caught, PID: 5480, thread: DBMSrv_MainThread, code 0xc0000005 (Access violation) at IP 0x0000000000426C00, read of address 0x000000000000018C, 6-21 15:14:59 GMT
Do you know what that mean ?
Similar Messages
-
How to configure sap maxdb client to connect to SAP ERP system (SAP HR)
Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb clienti tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4008
POS(1) Unknown user name/password combination
For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani -
RSA1 DB Connection from SAP BW to external SQL Server databas.
Hello,
I am trying to connect our SAP BW system with SQL Server Source System through DB Connect in transaction RSA1.
Our BW system is running on Windows and MaxDB platform, therefore have I already added the latest dbmssslib.dll library to the kernel for SQL Server.
But the connection does not work anyhow, I recieve the error "Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does > exist or access denied." and I am quite sure that my input parameters are correct.
Therefore I wonder if someone has run into a similar problem and what the problem could be?
Best Regards,
Niklas SandstedtHi,
I am sorry that my case was assigned to wrong forum.
That should now have been corrected, however my problem still remains unsolved in one of our systems.
I found note 178949, which fixed the problem in one system. But even though the system setup seems to be identical, the two systems appears different.
The following has been done for both systems:
1. Upgraded kernel to 701 version 111 and added dbmssslib.dll and dbmssslib.pdb files
2. Created Logical system in BD54.
3. Tried to create DB connection in transaction DBACOCKPIT.
In the third step, the setup fails and I receive the following error message when I test the connection:
Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not > exist or access denied.
Database error -1
All profile parameters AL11-directories also seems to be correct in both systems, so both should find the dbmssslib.dll file.
One issue that I see is in DBACOCKPIT, the checkbox for "SAP Systems with basis release" is unchangeble and marked. This however, I think was changed in the other system automatically when the connection was established successfully.
Has anyone run into the same problem?
Best Regards,
Niklas Sandstedt -
CJS-30196 Connect to SAP gateway failed: Error during installation
Dear Experts,
Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
ERROR 2009-08-04 08:28:43
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'node1:sapgw03' not reached
TIME Tue Aug 04 08:28:43 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
ERROR 2009-08-04 08:28:43
FCO-00011 The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
Regards,
Ritesh BhatiaHi Guys,
I am installing Ecc6 on my laptop. While installing i have got a below error...
ERROR 2012-01-24 06:58:02
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A
ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION
CPIC (TCP/IP) on local host with UnicodeERROR partner
'ecc6:sapgw04' not reachedTIME Tue Jan 24 06:58:02
2012RELEASE 700COMPONENT NI (network interface)VERSION
38RC -10MODULE nixxi.cppLINE 2764DETAIL
NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT
WSAECONNREFUSED: Connection refusedCOUNTER
ERROR 2012-01-24 06:58:02
FCO-00011 The step createJSF with step key
NW_Onehost
ind
ind
ind
ind
0
0
NW_Onehost_System
ind
ind
ind
ind
1
0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Could you please provide some solution for this?
with regards
Vinayak -
Hi all,
had to set up short timed a trial instance of SAP NetWeaver Application Server ABAP 7.4 on SAP MaxDB in Amazon Cloud
Installtion was pretty straightforward but now if have the problem of accessing the frontend via RDP.
Connecting via ssh works fine but when it comes to rdp it just says something like "rdp not activated or computer not reachable or down". Ping is also not working.
The instance is created as public.
Tried to reach it from my corporate network (ports opened), from home, from mobile broadband. Same result, ssh working, rdp not.
Any ideas?
thanks
FerdinandHi Ferdinand,
not every appliance in CAL comes with an Windows system that has the UI tools preinstalled. The system you are currently using comes with a Linux server only on which the NetWeaver ABAP and the MaxDB run. Here are a few hints which help to understand if RDP is available:
1) take a look at the default "Access Point" configuration. If Port 3389 (RDP) is not opened by default, then there is probably no RDP available
2) take a look at the number of virtual machines (instances) the solution details. If there is only one VM listed, it is the one with the server components (very likely not Windows).
3) Check if the connect button on the "INSTANCES" screen lists RDP (the connect button becomes visible after the solution has been started). If there is no option for RDP, then it is not available.
In a nutshell, for this particular solutions there is no Windows RDP available. Nevertheless, the user guides explains how to fetch and install SAPGUI to your client machine so that you are able to connect to the system.
Thanks and Regards,
Hannes
Best Regards / Freundliche Grüße / 敬具 / 此致敬礼 / Поздрави
Hannes Kuehnemund | Product Owner - SAP Cloud Appliance Library
Vote in our latest poll here: http://cal.sap.com - Information on Instance Popup -
HTTPs connection from SAP WebAS
Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer. -
Remote Connection from SAP to MS-SQL server
Hello Experts,
We have been following 2 options so far and we have come across some issues
The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
We have been able to test this scenario successfully from SQL Server side
However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
While calling the stored procedure from the ABAP Code we have an error
The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
"Access to the remote server is denied because the current security context is not trusted."
This issue is new after the SQL Server 2005.
We are trying to resolve that.
Secondly we have been trying the DBCON option as well as per OSS Note 323151
We have a few things thatu2019s impacting our scenario:
The remote servers are in a different domain
The remote servers are located in DIZ
Remote server is a named instance
Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
The Database name starts with a numeric value
Due a combination of factors as mentioned above the standard approach does not work
Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
Thanks in advance,Yes,
DBConnect & UDConnect.
Works like a charm.
We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql). -
SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database
Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth DamodarShort answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus -
Connection from SAP 4.0B System to IBM MQ Series
Hi
is it possible to connect <b>SAP 4.0B</b> System with <b>IBM MQ Series 6.0</b>,is the connection supported by SAP 4.0B?
If supported I am confused with what is the <b>RFC Destination</b> to be used
is it <b>R/3 Connections</b> or <b>TCP/IP connections</b>
Thanks in advance
Warm regards
RajasekharHi Anup
Thanku for your valuable input, here in the TCP/IP connections can you please suggest what are the
<b>ACTIVATION TYPE</b> to be used there are 4 radio buttons, is it the
<b>Registered Server Program</b> OR
<b>Start On Application server</b>OR
<b>Start on Explicit Host</b> OR
<b>Start on Front End Work Station</b>
if it is the registered server program what are the values to be used for <b>PROGRAM ID</b>
is it required to make any changes in <b>SAPRFC INI File</b>
Thanks in advance
Warm regards
Rajasekhar -
Connection from SAP ERP 6 to B1i2007
Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
PeterHello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter -
Connection from SAP to our systems involving 2 saprouters
connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table -
Setting up a https connection between SAP CRM and genesys gplus adapter
Hello All-
We are integrating SAP CRM with genesys mysap gplus adapter. We are struck in setting up a https connection between sap and gplus adapter.
Can anyone here help me out in this like how to get the SSL Protocol, keystore, keystore password,truststore and truststore password.
Information abt Adapters server certificate. Do we need to configure the adapter for the proxy also?
Any additional comment will help. Thanks in advance!Hello Vinod,
Please refer the following OSS notes 564085.
Please reward if helpful.
regards,
Muralidhar Prasad.C -
Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek MajchrowskiWolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM -
How to check connection from SAP to reservation system?
Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta -
Problem in connection from SAP to XI
Hi Guys,
I have problem to connect from SAP to XI. We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing No Connection to Integration Builder. Please kindly advice what configuration we need to in SAP side in order to connect XI.
Its Very Urgent. Please advice me.
Thanks in Advance.
Regards,
Anil.Anil,
could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
Cheers,
-Sunil
Maybe you are looking for
-
Item 000 RN1D25 /4105140000 / commitment budget for year 2011 exceeded (
Dear All, Iam using FR32 for Budget Uploading in ( Funds Management ) at the time of uploading it is giving like this message Item 000 RN1D25 /4105140000 / commitment budget for year 2011 exceeded In document item 000 RN1D25 /4105140000 /, commitment
-
Loading the different result sets in the same sequence for the target table
Dear all, I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name. I created one sequence say Y as my target table has pri
-
Which Is Better:Create The Database Manually Or As a Part Of Your Code?
hi everybody i just want to know people when you creating a JDBC Application and introduce the program to the user to deal with do you create the database through the database client like phpmyadmin for mysql or by using query in your program?if so w
-
Install Oracle VM Manager 2.1 error
When installing Oracle VM Manager I am getting the following error: Please enter the choice: [1|2] 1. Install Oracle VM Manager 2. Uninstall Oracle VM Manager 1 Starting Oracle VM Manager installation ... Checking the supported platforms ... Done Che
-
Blank cdr will not load, macbook spits it back out
I bought some new cdr's and my macbook will not load them. after a few minutes it spits the disc out. i can load the disk fine in my imac and pc computers. any ideas. i've shut my macbook down completely and turned it on again without any result.