Connect to server using IPv6 address in afp URL

I'm not sure whether this is the correct forum for this question, but does anyone know whether I can specify an IPv6 address in the "Connect to Server" dialog?
I've setup IPv6 over direct-wired ethernet between my MBP and Mini. Using ping6, I can ping one from the other (but only when I specify -I en0)
I've tried the following URLs:
afp://[fe80::0216:cbff:dead:beef]
afp://[fe80::0216:cbff:dead:beef%en0]
I think the problem might be because I don't have an IPv6 router between the two hosts.
Thanks.
MacBook Pro 15 2.0GHz   Mac OS X (10.4.8)   mini 1.83GHz

I have the same problem and for me it extends to everything from SSH to HTTP. I think that mac has a bug in it networking. I can't get it to work on any mac I've tried. Can your mini connect to your laptop?
I've been googling for 3 days and can't find any solution.
MBP   Mac OS X (10.4.9)  

Similar Messages

  • Help !! I can't connect to server using connection manager

    Hello :
    i hava three machine,i use connection manager on Oracle 8.1.7
    i can't connect to server using connection manager
    1.lsnrctl start (Server)
    2.svmrgrl (Server)
    start (Server)
    3.cmctl start (Middle tier)
    4.sqlplus scott/tiger@test (client)
    ORA-12564
    Please help my!
    ---- CLIENT (sqlnet.ora)
    USE_CMAN = TRUE
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    ---- CLIENT (tnsname.ora)
    (DESCRIPTION =
    (SOURCE_ROUTE = YES)
    (ADDRESS = (PROTOCOL = TCP)(HOST = orcl-middler)(PORT = 1610))
    (ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
    (CONNECT_DATA =
    (SID = bigbear)
    ---- MIDDLE TIER(cman.ora)
    CMAN = (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = TCP)
    (HOST = orcl-middler)
    (PORT = 1610)
    ---- SERVER (listener.ora)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/8.1.7)
    (SID_NAME = bigbear)
    ---- SERVER (init.ora)
    MTS_DISPATCHERS = "(PROTOCOL = TCP)(DISPATCHERS=10)(MULTIPLE=ON)"
    MTS_MAX_DISPATCHERS=20
    MTS_MAX_SERVERS = 30
    MTS_SERVERS = 10
    MTS_SERVICE = bigbear
    db_name = "bigbear"
    db_domain = intumit.com
    instance_name = bigbear
    service_names = bigbear.intumit.com

    midder tier must config hosts
    because dispatcher have listener information
    midder tier must know ipaddress
    Ex. on midder tier
    /etc/hosts
    192.168.10.1 orcl-middler
    from client to server it's ok

  • CME - unable to configure H.323 gw using ipv6 address

    Hi All
    I have installed Call Manager Express 8.0 in 2811 Router and trying to interconnect with other Call Managers using IPV6.
    CME works fine in dual stack made with both IPV4 & IPV6 address with the internal network. While trying to connect other Call Manager,I have configured the H.323 Gateway using IPV4 address and i can dial out the numbers.. 
    Since we are functioning this Call Manager in IPV6, i tried configuring the H.323 Gateway using IPv6 address but there is no option to configure IPV6 IP in the "voip bind srcaddress <ip>". Can anyone tell me is it possible to do it & which CME version support ipv6.
    Regards,
    Lavanya

    Hi AS,
    Do not use the DHCP on the WLC.
    Use a DHCP on the neighbor swtich if possible for the native VLAN.
    Regards,
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • Sample code to connect LDAP server using jndi

    Hi,
    can any one help me with sample code to connect LDAP server using jndi,
    like i want to make use of Ldap server for serching Active directoty.
    Thanks in advance,
    Regards
    Muthu

    You can set ldap_auth=none for anonymous user.
    User/password is mandatory otherwise. Please refer to http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/appendix_ldap_driver.htm#CHDHCABH
    Thansk,

  • How to Connect to Server using Server Admin

    I am trying to connect to Server using Server Admin so I can setup a wiki.
    I enter my hostname, username and password and I get the error unable to connect to server, any ideas what is going wrong?
    I can ping the server name and that works. Is there something else I have to do to get the server running
    Thanks in advance

    Any firewalls/routers "in the way"?
    Is this over Internet?

  • Servername_ID 30620 Warning_Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.

    Hi everybody.
    I have this problem on a Windows Server 2012 Datacenter, offering SCOM2012 and VMM2012 SP1  services.
    If I try to access to \\servername\c$ , or vmm agent on a server try to access it, in the "Server Manager , File and Storage Services, Servers" console I can see the message, every minutes:
    servername ID 30620 Warning
    Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.
    I alreday apply the registry update:
    LocalAccountTokenFilterPolicy QWORD = 1
    UAC and firewall on the server are disabled.
    Anyone have some suggestion for me ?
    Thanks.
    Gabriel

    Two HP DL Servers - a DL380 G5 and a DL 360 G5 - running Server 2012 Standard with Hyper-V.  Both servers have HP NC373i onboard Gigabit NICs.
    NIC 1 is for Management OS, NIC 2 is dedicated to Hyper-V.  The latest/greatest HP Management software, drivers, firmware for Server 2012 are installed on both servers.
    Could copy files to/from other servers with no problem, and near gigabit speed.  All other networking appeared normal.
    Could not copy files to each other. Could ping each other though.
    Ran the above command and rebooted both servers - issue has gone away.
    I've got a few more of these older HP servers that I'm going to test with Server 2012.

  • Cannot connect to server using message server: ms://xiidhasoft:50004/P4

    Hi SAP Guru's
    When PISUPER or any any of the enduser is trying to login in the Integration Builder , they are getting error
    Cannot connect to server using message server: ms://xiidhasoft:50004/P4
    I have tryed to search in SDN and got below solution but no success
    1. Exchange Profile of PI - http://host:port/exchangeProfile
    2. Check with the rmi port number.
    3. if rmi port number is empty or any number is present ( check with Tr code: SMICM - services - check for p4 port number - it will be ex: 5<nr>04)
    4. fill the rmi port number as present in the P4.
    OR
    implement note 864268
    I have Netweaver PI 7.1 .
    Please suggest some alternative solution.
    Thanks & Regards
    Vinay Patel

    You may check your local PC Java Network Setting.
    Troubleshooting:
    Probably Javau2122 WebStart does not detect the correct Proxy Settings. In this case please proceed as follows:
    To change the Proxy Settings for Javau2122 Web Start:
    1. Click Start --> Run  and enter javaws. Press button OK.
    2. Control Panel -> Programs ->Java -> Network Settings...
    3. Select Direct Connection to switch off the proxy settings and press button OK.
    If this still does not work, select Use proxy server to set manually the HTTP Proxy and Port.
    Contact your network administrator for the correct settings.

  • Connecting SQL server using JavaScript

    I found an article on connecting SQL server using JavaScript. http://www.devarticles.com/c/a/JavaScript/Combining-North-Pole-with-South-Pole-JavaScript-with-SQL-Server-2000/
    Do you people think it's possible? i try out the code already but something wrong with it. I just copy and paste it to a html file but it comes out with error. Do I miss out something? Thanks.
    SY Tee

    Check the permissions and server authentication from the below link,
    http://technet.microsoft.com/en-us/library/ms179354(v=sql.90).aspx
    Regards, RSingh

  • I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

    I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

    The easiest way would be to use Back to My Mac, but that will only work if the server is a Mac running OS X 10.7 or later and you have the cooperation of the network administrator.
    OS X: Using and troubleshooting Back to My Mac with your iCloud account

  • Unable to connect to Server at servername . enter a different URL and try again (only on client machine)

    Hello All,
    We are getting "Unable to connect to Server at <<servername>>. enter a different URL and try again" error, if we are trying to connect to report server in report builder.
    This issue is appearing only on 2-3 client machines only. Rest on other client machines and server URL is working fine.
    Please suggest
    Thanks in Advanace
    -Regards
    -Kumud Vaish

    I would suggest looking at what might be different between those clients and the others that work.  Do they run the same antivirus version?  Did they receive any recent updates (windows or AV)?  Are they potentially on a different network
    (sometimes a wireless network is configured to be different from the wired)?  Are they getting any different group policies?
    We've seen the antivirus web control block access before in my environment.

  • Problem connecting RMI-Server using a servlet

    Hi All..
    I have a RMI-client server model woring fine in AIX box.I am currently in a need to create one web client(may be with servlet or JSP).
    I wrote a sample servlet which try to connect to the RMI server. But when I run the servlet Its simply try to connect and then wait for unlimited time,not even print any exception/error.
    Both my RMI sevrer and Tomcat are in the same box.
    I am sending the servlet code for your reference.
    import java.rmi.*;
    import java.rmi.registry.Registry;
    import java.rmi.registry.LocateRegistry;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    import ir77.mon.engine.*;
    public class WebClient extends HttpServlet
    public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException
    XmlServerIntf xmlServerIntf = null;
    PrintWriter out = res.getWriter();
    res.setContentType("text/plain");
    try{
    out.println("Connecting to server......");
    //Seems this one is sufficient.(either this code or the below one)
    //String strServerUrl = "rmi://" + "192.168.100.22" + "/ir77.mon.engine";
    //xmlServerIntf = (XmlServerIntf) Naming.lookup(strServerUrl);
    //Try with this one also
    Registry reg = LocateRegistry.getRegistry("192.168.100.22", 2004);
    xmlServerIntf = (XmlServerIntf) reg.lookup("rmi://192.168.100.22/ir77.mon.engine");
    out.println("Connected to server");
    catch (Exception e){
    System.out.println("Exception in WebClient"+e);
    when I run the servlet in the browser with "http://192.168.100.22:8080/WebClient" its simply prints " Connecting to server......" and waits.
    Note : 192.168.100.22 - where my rmi server starts and 2004 -where I created by rmiregistry.I created it using LocateRegistry.createRegistry(2004);
    I have tried starting tomcat with "-security" option too but no responds as well.
    Do I have to provide some grant permission in catlina.policy file?If yes what?
    currently I have tried with giving all permission..
    Do I need to change the RMI server code?
    Any help will be highly appreciated....

    Hi genady,
    Oh....Ya I like to...I thought no body was interested...as I didn't get any reply from anybody....
    Well The first thing is that with the look up method in the servlet
    it should be like :
    Registry reg = LocateRegistry.getRegistry("ip address of the rmi server", port number);
    RMIServerInterface = (type cast with RMIServerInterface) reg.lookup("rmi binding string");
    Now you are able to get the server interface object & you can call any method.
    Next you have to provide the grant permission in the catalina.policy file to the folder where you have your application like....
    grant codeBase "file:${catalina.home}/webapps/ROOT/WEB-INF/classes/-" {
    permission java.security.AllPermission;
    Or you can give specific permissions also.
    Finally you have to run the tomcat as : $catalina.sh start -security
    Note: One more thing you have to keep in mind that's the structure of your application. ie com.mon.yourapp.......u have to create the same structure in tomcat's classes folder .
    Its done...........

  • Can't connect to server using hostname

    I have an Apache server running on my MacBook Pro and am able to connect to it's website using localhost just fine.  I have 3 clients on the internal LAN that I am testing connection with: 2 MacBook Pros and 1 iPhone.  The iPhone and one of the other computers can connect to the server's website using the hostname i.e. http://hostname/   however the last MBPro cannot connect with hostname. It can only connect using ip address.  Any suggestions on what's why the last computer can't resolve the hostname?
    I'm using safari as my browser and all 3 MBPros are running 10.6.7.

    When you say hostname, do you mean hostname.local? or is it a FQDNS?
    if your talking about a local host name did you try adding the .local to the end?
    If it's FQDNS:
    Have you tried Resetting the DNS cache? You can do so by opening terminal in utilites and typing "sudo dscacheutil -flushcache"
    If that doesn't fix the issue, have you checked to make sure the DNS on the effected computer is the same as the other computers?

  • VPN to a Windows Network - can't connect to server using RDC

    I'm trying to connect to my office's windows network.
    I can connect using Cisco VPN but can't when I try to Connect to Server when specifying AFP or SMB as the path. I was told SMB is not supported and that I should just be able to use RDC once the VPN is established. RDC however is not connecting for me either. Any suggestions are greatly appreciated. Thnx

    Check your System Preference settings under sharing,
    if your firewall is on it may cause issues. Turn it
    off and see if that solves it for you. If not make
    sure you're using the latest client (4.9).
    Hi. Problem occurs with and without firewall on. I'm using Cisco VPN 4.9 too. I've been able to use RDC before which is weird. I'm not sure, but ever since the last Apple Security Update last week...I have been having this problem. But I'm not ruling out anything the IT dept. may be doing. :\

  • How to connect sql server using oracle Client

    Hi,
    I am working in oracle9i and windows os 32 bit.
    I need to connect SQL server 2000 from my oracle client..
    I heard about heterogeneous connectivity ...
    Please expalin me the steps what to add and how to connect the sql server...
    Regs....

    Are you trying to connect to SQL Server from your Oracle database (i.e. create a database link in Oracle to SQL Server)? Or are you trying to connect to SQL Server using your Oracle client software (i.e. SQL*Plus)?
    The former just requires Heterogeneous Services with Generic Connectivity. The latter is functionality that has been depricated and probably no longer works in your environment.
    Justin

Maybe you are looking for